Message-ID: <9d6cafcc-2bb8-4c7d-8d53-8c10a29a56c9@ghiti.fr>
Date: Thu, 25 Jan 2024 18:18:55 +0100
From: Alexandre Ghiti <alex@...ti.fr>
To: Charlie Jenkins <charlie@...osinc.com>,
 Paul Walmsley <paul.walmsley@...ive.com>, Palmer Dabbelt
 <palmer@...belt.com>, Albert Ou <aou@...s.berkeley.edu>,
 Jonathan Corbet <corbet@....net>, Conor Dooley <conor.dooley@...rochip.com>,
 Clément Léger <cleger@...osinc.com>,
 Atish Patra <atishp@...shpatra.org>, Randy Dunlap <rdunlap@...radead.org>
Cc: linux-riscv@...ts.infradead.org, linux-kernel@...r.kernel.org,
 linux-doc@...r.kernel.org, Atish Patra <atishp@...osinc.com>
Subject: Re: [PATCH v10 2/2] documentation: Document
 PR_RISCV_SET_ICACHE_FLUSH_CTX prctl


On 25/01/2024 05:23, Charlie Jenkins wrote:
> Provide documentation that explains how to properly do CMODX in riscv.
>
> Signed-off-by: Charlie Jenkins <charlie@...osinc.com>
> Reviewed-by: Atish Patra <atishp@...osinc.com>
> ---
>   Documentation/arch/riscv/cmodx.rst | 96 ++++++++++++++++++++++++++++++++++++++
>   Documentation/arch/riscv/index.rst |  1 +
>   2 files changed, 97 insertions(+)
>
> diff --git a/Documentation/arch/riscv/cmodx.rst b/Documentation/arch/riscv/cmodx.rst
> new file mode 100644
> index 000000000000..24aafa23a72b
> --- /dev/null
> +++ b/Documentation/arch/riscv/cmodx.rst
> @@ -0,0 +1,96 @@
> +.. SPDX-License-Identifier: GPL-2.0
> +
> +==============================================================================
> +Concurrent Modification and Execution of Instructions (CMODX) for RISC-V Linux
> +==============================================================================
> +
> +CMODX is a programming technique where a program executes instructions that were
> +modified by the program itself. Instruction storage and the instruction cache
> +(icache) are not guaranteed to be synchronized on RISC-V hardware. Therefore, the
> +program must enforce its own synchronization with the unprivileged fence.i
> +instruction.
> +
> +However, the default Linux ABI prohibits the use of fence.i in userspace
> +applications. At any point the scheduler may migrate a task onto a new hart. If
> +migration occurs after the userspace synchronized the icache and instruction
> +storage with fence.i, the icache on the new hart will no longer be clean. This
> +is due to the behavior of fence.i only affecting the hart that it is called on.
> +Thus, the hart that the task has been migrated to may not have synchronized
> +instruction storage and icache.
> +
> +There are two ways to solve this problem: use the riscv_flush_icache() syscall,
> +or use the ``PR_RISCV_SET_ICACHE_FLUSH_CTX`` prctl() and emit fence.i in
> +userspace. The syscall performs a one-off icache flushing operation. The prctl
> +changes the Linux ABI to allow userspace to emit icache flushing operations.
> +
> +As an aside, "deferred" icache flushes can sometimes be triggered in the kernel.
> +At the time of writing, this only occurs during the riscv_flush_icache() syscall
> +and when the kernel uses copy_to_user_page(). These deferred flushes happen only
> +when the memory map being used by a hart changes. If the prctl() context caused
> +an icache flush, this deferred icache flush will be skipped as it is redundant.
> +Therefore, there will be no additional flush when using the riscv_flush_icache()
> +syscall inside of the prctl() context.
> +
> +prctl() Interface
> +---------------------
> +
> +Call prctl() with ``PR_RISCV_SET_ICACHE_FLUSH_CTX`` as the first argument. The
> +remaining arguments will be delegated to the riscv_set_icache_flush_ctx
> +function detailed below.
> +
> +.. kernel-doc:: arch/riscv/mm/cacheflush.c
> +	:identifiers: riscv_set_icache_flush_ctx
> +
> +Example usage:
> +
> +The following files are meant to be compiled and linked with each other. The
> +modify_instruction() function replaces an add with 0 with an add with one,
> +causing the instruction sequence in get_value() to change from returning a zero
> +to returning a one.
> +
> +cmodx.c::
> +
> +	#include <stdio.h>
> +	#include <sys/prctl.h>
> +
> +	extern int get_value();
> +	extern void modify_instruction();
> +
> +	int main()
> +	{
> +		int value = get_value();
> +		printf("Value before cmodx: %d\n", value);
> +
> +		// Call prctl before first fence.i is called inside modify_instruction
> +		prctl(PR_RISCV_SET_ICACHE_FLUSH_CTX_ON, PR_RISCV_CTX_SW_FENCEI, PR_RISCV_SCOPE_PER_PROCESS);
> +		modify_instruction();
> +
> +		value = get_value();
> +		printf("Value after cmodx: %d\n", value);
> +		return 0;
> +	}
> +
> +cmodx.S::
> +
> +	.option norvc
> +
> +	.text
> +	.global modify_instruction
> +	modify_instruction:
> +	lw a0, new_insn
> +	lui a5,%hi(old_insn)
> +	sw  a0,%lo(old_insn)(a5)
> +	fence.i
> +	ret
> +
> +	.section modifiable, "awx"
> +	.global get_value
> +	get_value:
> +	li a0, 0
> +	old_insn:
> +	addi a0, a0, 0
> +	ret
> +
> +	.data
> +	new_insn:
> +	addi a0, a0, 1
> diff --git a/Documentation/arch/riscv/index.rst b/Documentation/arch/riscv/index.rst
> index 4dab0cb4b900..eecf347ce849 100644
> --- a/Documentation/arch/riscv/index.rst
> +++ b/Documentation/arch/riscv/index.rst
> @@ -13,6 +13,7 @@ RISC-V architecture
>       patch-acceptance
>       uabi
>       vector
> +    cmodx
>   
>       features
>   
>

You can add:

Reviewed-by: Alexandre Ghiti <alexghiti@...osinc.com>

Thanks,

Alex

Powered by blists - more mailing lists