| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <202401261250.b07Yt30Z-lkp@intel.com>
Date: Fri, 26 Jan 2024 12:13:22 +0800
From: kernel test robot <lkp@...el.com>
To: Serge Semin <fancer.lancer@...il.com>
Cc: oe-kbuild-all@...ts.linux.dev, linux-kernel@...r.kernel.org
Subject: drivers/misc/eeprom/idt_89hpesx.c:599:31: sparse: sparse: incorrect
type in assignment (different base types)
tree: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master
head: ecb1b8288dc7ccbdcb3b9df005fa1c0e0c0388a7
commit: cfad6425382ec81acd073fdf24361e1c30b4cb36 eeprom: Add IDT 89HPESx EEPROM/CSR driver
date: 7 years ago
config: openrisc-randconfig-s041-20230115 (https://download.01.org/0day-ci/archive/20240126/202401261250.b07Yt30Z-lkp@intel.com/config)
compiler: or1k-linux-gcc (GCC) 12.3.0
reproduce: (https://download.01.org/0day-ci/archive/20240126/202401261250.b07Yt30Z-lkp@intel.com/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@...el.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202401261250.b07Yt30Z-lkp@intel.com/
sparse warnings: (new ones prefixed by >>)
>> drivers/misc/eeprom/idt_89hpesx.c:599:31: sparse: sparse: incorrect type in assignment (different base types) @@ expected unsigned short [addressable] [assigned] [usertype] memaddr @@ got restricted __le16 [usertype] @@
drivers/misc/eeprom/idt_89hpesx.c:599:31: sparse: expected unsigned short [addressable] [assigned] [usertype] memaddr
drivers/misc/eeprom/idt_89hpesx.c:599:31: sparse: got restricted __le16 [usertype]
drivers/misc/eeprom/idt_89hpesx.c:671:31: sparse: sparse: incorrect type in assignment (different base types) @@ expected unsigned short [addressable] [assigned] [usertype] memaddr @@ got restricted __le16 [usertype] @@
drivers/misc/eeprom/idt_89hpesx.c:671:31: sparse: expected unsigned short [addressable] [assigned] [usertype] memaddr
drivers/misc/eeprom/idt_89hpesx.c:671:31: sparse: got restricted __le16 [usertype]
>> drivers/misc/eeprom/idt_89hpesx.c:769:24: sparse: sparse: incorrect type in assignment (different base types) @@ expected unsigned short [addressable] [assigned] [usertype] csraddr @@ got restricted __le16 [usertype] @@
drivers/misc/eeprom/idt_89hpesx.c:769:24: sparse: expected unsigned short [addressable] [assigned] [usertype] csraddr
drivers/misc/eeprom/idt_89hpesx.c:769:24: sparse: got restricted __le16 [usertype]
>> drivers/misc/eeprom/idt_89hpesx.c:770:21: sparse: sparse: incorrect type in assignment (different base types) @@ expected unsigned int [addressable] [assigned] [usertype] data @@ got restricted __le32 [usertype] @@
drivers/misc/eeprom/idt_89hpesx.c:770:21: sparse: expected unsigned int [addressable] [assigned] [usertype] data
drivers/misc/eeprom/idt_89hpesx.c:770:21: sparse: got restricted __le32 [usertype]
drivers/misc/eeprom/idt_89hpesx.c:834:24: sparse: sparse: incorrect type in assignment (different base types) @@ expected unsigned short [addressable] [assigned] [usertype] csraddr @@ got restricted __le16 [usertype] @@
drivers/misc/eeprom/idt_89hpesx.c:834:24: sparse: expected unsigned short [addressable] [assigned] [usertype] csraddr
drivers/misc/eeprom/idt_89hpesx.c:834:24: sparse: got restricted __le16 [usertype]
>> drivers/misc/eeprom/idt_89hpesx.c:859:17: sparse: sparse: cast to restricted __le32
>> drivers/misc/eeprom/idt_89hpesx.c:859:17: sparse: sparse: cast to restricted __le32
>> drivers/misc/eeprom/idt_89hpesx.c:859:17: sparse: sparse: cast to restricted __le32
>> drivers/misc/eeprom/idt_89hpesx.c:859:17: sparse: sparse: cast to restricted __le32
>> drivers/misc/eeprom/idt_89hpesx.c:859:17: sparse: sparse: cast to restricted __le32
>> drivers/misc/eeprom/idt_89hpesx.c:859:17: sparse: sparse: cast to restricted __le32
In file included from include/linux/kernel.h:11,
from drivers/misc/eeprom/idt_89hpesx.c:70:
include/linux/log2.h:22:1: warning: ignoring attribute 'noreturn' because it conflicts with attribute 'const' [-Wattributes]
22 | int ____ilog2_NaN(void);
| ^~~
drivers/misc/eeprom/idt_89hpesx.c: In function 'idt_dbgfs_csr_write':
drivers/misc/eeprom/idt_89hpesx.c:941:31: warning: variable 'csrval_len' set but not used [-Wunused-but-set-variable]
941 | int ret, csraddr_len, csrval_len;
| ^~~~~~~~~~
vim +599 drivers/misc/eeprom/idt_89hpesx.c
565
566 /*===========================================================================
567 * EEPROM IO-operations
568 *===========================================================================
569 */
570
571 /*
572 * idt_eeprom_read_byte() - read just one byte from EEPROM
573 * @pdev: Pointer to the driver data
574 * @memaddr: Start EEPROM memory address
575 * @data: Data to be written to EEPROM
576 */
577 static int idt_eeprom_read_byte(struct idt_89hpesx_dev *pdev, u16 memaddr,
578 u8 *data)
579 {
580 struct device *dev = &pdev->client->dev;
581 struct idt_eeprom_seq eeseq;
582 struct idt_smb_seq smbseq;
583 int ret, retry;
584
585 /* Initialize SMBus sequence fields */
586 smbseq.ccode = pdev->iniccode | CCODE_EEPROM;
587 smbseq.data = (u8 *)&eeseq;
588
589 /*
590 * Sometimes EEPROM may respond with NACK if it's busy with previous
591 * operation, so we need to perform a few attempts of read cycle
592 */
593 retry = RETRY_CNT;
594 do {
595 /* Send EEPROM memory address to read data from */
596 smbseq.bytecnt = EEPROM_WRRD_CNT;
597 eeseq.cmd = pdev->inieecmd | EEPROM_OP_READ;
598 eeseq.eeaddr = pdev->eeaddr;
> 599 eeseq.memaddr = cpu_to_le16(memaddr);
600 ret = pdev->smb_write(pdev, &smbseq);
601 if (ret != 0) {
602 dev_err(dev, "Failed to init eeprom addr 0x%02hhx",
603 memaddr);
604 break;
605 }
606
607 /* Perform read operation */
608 smbseq.bytecnt = EEPROM_RD_CNT;
609 ret = pdev->smb_read(pdev, &smbseq);
610 if (ret != 0) {
611 dev_err(dev, "Failed to read eeprom data 0x%02hhx",
612 memaddr);
613 break;
614 }
615
616 /* Restart read operation if the device is busy */
617 if (retry && (eeseq.cmd & EEPROM_NAERR)) {
618 dev_dbg(dev, "EEPROM busy, retry reading after %d ms",
619 EEPROM_TOUT);
620 msleep(EEPROM_TOUT);
621 continue;
622 }
623
624 /* Check whether IDT successfully read data from EEPROM */
625 if (eeseq.cmd & (EEPROM_NAERR | EEPROM_LAERR | EEPROM_MSS)) {
626 dev_err(dev,
627 "Communication with eeprom failed, cmd 0x%hhx",
628 eeseq.cmd);
629 ret = -EREMOTEIO;
630 break;
631 }
632
633 /* Save retrieved data and exit the loop */
634 *data = eeseq.data;
635 break;
636 } while (retry--);
637
638 /* Return the status of operation */
639 return ret;
640 }
641
642 /*
643 * idt_eeprom_write() - EEPROM write operation
644 * @pdev: Pointer to the driver data
645 * @memaddr: Start EEPROM memory address
646 * @len: Length of data to be written
647 * @data: Data to be written to EEPROM
648 */
649 static int idt_eeprom_write(struct idt_89hpesx_dev *pdev, u16 memaddr, u16 len,
650 const u8 *data)
651 {
652 struct device *dev = &pdev->client->dev;
653 struct idt_eeprom_seq eeseq;
654 struct idt_smb_seq smbseq;
655 int ret;
656 u16 idx;
657
658 /* Initialize SMBus sequence fields */
659 smbseq.ccode = pdev->iniccode | CCODE_EEPROM;
660 smbseq.data = (u8 *)&eeseq;
661
662 /* Send data byte-by-byte, checking if it is successfully written */
663 for (idx = 0; idx < len; idx++, memaddr++) {
664 /* Lock IDT SMBus device */
665 mutex_lock(&pdev->smb_mtx);
666
667 /* Perform write operation */
668 smbseq.bytecnt = EEPROM_WR_CNT;
669 eeseq.cmd = pdev->inieecmd | EEPROM_OP_WRITE;
670 eeseq.eeaddr = pdev->eeaddr;
671 eeseq.memaddr = cpu_to_le16(memaddr);
672 eeseq.data = data[idx];
673 ret = pdev->smb_write(pdev, &smbseq);
674 if (ret != 0) {
675 dev_err(dev,
676 "Failed to write 0x%04hx:0x%02hhx to eeprom",
677 memaddr, data[idx]);
678 goto err_mutex_unlock;
679 }
680
681 /*
682 * Check whether the data is successfully written by reading
683 * from the same EEPROM memory address.
684 */
685 eeseq.data = ~data[idx];
686 ret = idt_eeprom_read_byte(pdev, memaddr, &eeseq.data);
687 if (ret != 0)
688 goto err_mutex_unlock;
689
690 /* Check whether the read byte is the same as written one */
691 if (eeseq.data != data[idx]) {
692 dev_err(dev, "Values don't match 0x%02hhx != 0x%02hhx",
693 eeseq.data, data[idx]);
694 ret = -EREMOTEIO;
695 goto err_mutex_unlock;
696 }
697
698 /* Unlock IDT SMBus device */
699 err_mutex_unlock:
700 mutex_unlock(&pdev->smb_mtx);
701 if (ret != 0)
702 return ret;
703 }
704
705 return 0;
706 }
707
708 /*
709 * idt_eeprom_read() - EEPROM read operation
710 * @pdev: Pointer to the driver data
711 * @memaddr: Start EEPROM memory address
712 * @len: Length of data to read
713 * @buf: Buffer to read data to
714 */
715 static int idt_eeprom_read(struct idt_89hpesx_dev *pdev, u16 memaddr, u16 len,
716 u8 *buf)
717 {
718 int ret;
719 u16 idx;
720
721 /* Read data byte-by-byte, retrying if it wasn't successful */
722 for (idx = 0; idx < len; idx++, memaddr++) {
723 /* Lock IDT SMBus device */
724 mutex_lock(&pdev->smb_mtx);
725
726 /* Just read the byte to the buffer */
727 ret = idt_eeprom_read_byte(pdev, memaddr, &buf[idx]);
728
729 /* Unlock IDT SMBus device */
730 mutex_unlock(&pdev->smb_mtx);
731
732 /* Return error if read operation failed */
733 if (ret != 0)
734 return ret;
735 }
736
737 return 0;
738 }
739
740 /*===========================================================================
741 * CSR IO-operations
742 *===========================================================================
743 */
744
745 /*
746 * idt_csr_write() - CSR write operation
747 * @pdev: Pointer to the driver data
748 * @csraddr: CSR address (with no two LS bits)
749 * @data: Data to be written to CSR
750 */
751 static int idt_csr_write(struct idt_89hpesx_dev *pdev, u16 csraddr,
752 const u32 data)
753 {
754 struct device *dev = &pdev->client->dev;
755 struct idt_csr_seq csrseq;
756 struct idt_smb_seq smbseq;
757 int ret;
758
759 /* Initialize SMBus sequence fields */
760 smbseq.ccode = pdev->iniccode | CCODE_CSR;
761 smbseq.data = (u8 *)&csrseq;
762
763 /* Lock IDT SMBus device */
764 mutex_lock(&pdev->smb_mtx);
765
766 /* Perform write operation */
767 smbseq.bytecnt = CSR_WR_CNT;
768 csrseq.cmd = pdev->inicsrcmd | CSR_OP_WRITE;
> 769 csrseq.csraddr = cpu_to_le16(csraddr);
> 770 csrseq.data = cpu_to_le32(data);
771 ret = pdev->smb_write(pdev, &smbseq);
772 if (ret != 0) {
773 dev_err(dev, "Failed to write 0x%04x: 0x%04x to csr",
774 CSR_REAL_ADDR(csraddr), data);
775 goto err_mutex_unlock;
776 }
777
778 /* Send CSR address to read data from */
779 smbseq.bytecnt = CSR_WRRD_CNT;
780 csrseq.cmd = pdev->inicsrcmd | CSR_OP_READ;
781 ret = pdev->smb_write(pdev, &smbseq);
782 if (ret != 0) {
783 dev_err(dev, "Failed to init csr address 0x%04x",
784 CSR_REAL_ADDR(csraddr));
785 goto err_mutex_unlock;
786 }
787
788 /* Perform read operation */
789 smbseq.bytecnt = CSR_RD_CNT;
790 ret = pdev->smb_read(pdev, &smbseq);
791 if (ret != 0) {
792 dev_err(dev, "Failed to read csr 0x%04x",
793 CSR_REAL_ADDR(csraddr));
794 goto err_mutex_unlock;
795 }
796
797 /* Check whether IDT successfully retrieved CSR data */
798 if (csrseq.cmd & (CSR_RERR | CSR_WERR)) {
799 dev_err(dev, "IDT failed to perform CSR r/w");
800 ret = -EREMOTEIO;
801 goto err_mutex_unlock;
802 }
803
804 /* Unlock IDT SMBus device */
805 err_mutex_unlock:
806 mutex_unlock(&pdev->smb_mtx);
807
808 return ret;
809 }
810
--
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki
Powered by blists - more mailing lists