Message-ID: <hhmbghooegclx3jbsx2neryligk3mj77lq7gns5xegags5ltoz@acdu6hssqwlw>
Date: Fri, 26 Jan 2024 13:45:15 +0100
From: Maxime Ripard <mripard@...nel.org>
To: Abhinav Kumar <quic_abhinavk@...cinc.com>
Cc: Jani Nikula <jani.nikula@...ux.intel.com>, 
	Jessica Zhang <quic_jesszhan@...cinc.com>, Neil Armstrong <neil.armstrong@...aro.org>, 
	Thomas Zimmermann <tzimmermann@...e.de>, Sam Ravnborg <sam@...nborg.org>, dri-devel@...ts.freedesktop.org, 
	linux-kernel@...r.kernel.org, Daniel Vetter <daniel@...ll.ch>, 
	David Airlie <airlied@...il.com>, Dmitry Baryshkov <dmitry.baryshkov@...aro.org>, 
	Rob Clark <robdclark@...il.com>
Subject: Re: Re: [PATCH RFC 0/4] Support for Simulated Panels

On Wed, Jan 17, 2024 at 09:36:20AM -0800, Abhinav Kumar wrote:
> Hi Jani and Maxime
> 
> On 1/17/2024 2:16 AM, Jani Nikula wrote:
> > On Wed, 17 Jan 2024, Maxime Ripard <mripard@...nel.org> wrote:
> > > Hi,
> > > 
> > > On Tue, Jan 16, 2024 at 02:22:03PM -0800, Jessica Zhang wrote:
> > > > This series introduces a simulated MIPI DSI panel.
> > > > 
> > > > Currently, the only way to validate DSI connectors is with a physical
> > > > panel. Since obtaining physical panels for all possible DSI configurations
> > > > is logistically infeasible, introduce a way for DSI drivers to simulate a
> > > > panel.
> > > > 
> > > > This will be helpful in catching DSI misconfiguration bugs and catching
> > > > performance issues for high FPS panels that might not be easily
> > > > obtainable.
> > > > 
> > > > For now, the simulated panel driver only supports setting customized
> > > > modes via the panel_simlation.mode modparam. Eventually, we would like
> > > > to add more customizations (such as configuring DSC, dual DSI, etc.).
> > > 
> > > I think that it's more complicated than it needs to be.
> > 
> > Both too complicated and not complicated enough! :p
>
> The end goal is to have a framework to be able to validate the display
> pipeline with MIPI panels of any resolution , DSC/non-DSC, different MIPI
> flags etc.
> 
> Historically, QC has been having an in-house framework to validate the
> panels in a simulated way as its logistically not possible to procure every
> panel from every vendor. This has been working pretty well but its not
> upstream yet. So we would like to work with the community to work on a model
> which works for everyone and this RFC was initiated with that in mind.

I think the goal was pretty clear. My point was more that there's no
reason it should be driver specific, and having a second path for it
doesn't really exert the actual panel path in the driver. I think a
separate driver would be better.

> There is simulation infrastructure in place in upstream for HDMI/DP in the
> form of chamelium based testing in IGT but no such fwk exists for DSI
> displays.
> 
> Different MIPI panels and resolutions test out not only the DSI controller
> but the entire display pipeline as based on resolution, compression and MIPI
> mode flags different parts of the pipeline can get exercised.
> 
> > > Why do we need to support (and switch to) both the actual and
> > > "simulated" panel?
> > > 
> 
> As per my discussion on IRC with the panel/bridge maintainers and DT
> maintainers, a simulation panel does not qualify for its own devicetree as
> its not a real hardware so we needed to come up with a way to have a module
> which can be attached to the encoder without its own bindings and
> devicetree. Thats what led to this RFC.

I still think it's worth trying, there's plenty of virtual drivers in
the DT already. But even then, DT policies shouldn't dictate general
framework design decisions: we have other ways to probe panels than
using the DT (by loading overlays, registering devices by hand, etc.). I
still think it would be a good idea to try though.

> > > Wouldn't it be simpler if we had a vkms-like panel that we could either
> > > configure from DT or from debugfs that would just be registered the
> > > usual way and would be the only panel we register?
> > 
> 
> No, we need to have validate actual hardware pipeline with the simulated
> panel. With vkms, actual display pipeline will not be validated. With
> incorrect display pipeline misconfigurations arising from different panel
> combinations, this can easily be caught with any existing IGT CRC testing.
> In addition, all performance related bugs can also be easily caught by
> simulating high resolution displays.

That's not what I meant. What I meant was that something like a
user-configurable, generic, panel driver would be a good idea. Just like
vkms (with the debugfs patches) is for a full blown KMS device.

> > I get the idea of trying to test DSI code without panels, and looking at
> > the goals above, I think your vkms suggestion is going to fall short of
> > those goals.
> > 
> > However, my gut feeling is that creating a simulated panel to catch DSI
> > misconfiguration etc. is going to be insanely complicated, and this
> > series doesn't even scratch the surface.
> > 
> > I guess my questions are, what's the scope here really, are those goals
> > realistic, does more code already exist beyond this skeleton?
> > 
> 
> 
> This series is only a starting RFC to be able to validate any display mode.
> This would have to be extended to be able to customize different pieces of
> the panel. Lets talk about the customizable pieces:
> 
> 1) Display resolution with timings (drm_display_mode)
> 2) Compression/non-compression
> 3) Command mode/Video mode
> 4) MIPI mode flags
> 5) DCS commands for panel enable/disable and other panel sequences
> 6) Power-up/Power-down sequence for the panel
> 
> Without a physical panel, yes its hard to validate if anything is wrong with
> (4) OR (5), the display might not come up at all visually. But from our
> experience, thats only a small portion and the real benefit of this
> framework will actually be from the validation failures we will catch from
> (1) to (4).
> 
> This RFC only provides a way to customize (1) at the moment as we wanted to
> get some feedback from the community about the best way which will work for
> everyone to customize all these parameters.
> 
> We are willing to expand this series based on the generic way we agree on to
> customize other params.
> 
> Yes, debugfs is an option too. But typically MIPI displays need some
> parameters configured to attach the panel to the encoder. So perhaps we can
> boot the simulation panel with a default resolution passed through command
> line and then across a modeset switch (1) to (4).

I think Jani's feeling was that it was going to be super complicated
fairly fast so supporting more features would definitely help to get an
idea of where this is going.

Maxime

Download attachment "signature.asc" of type "application/pgp-signature" (229 bytes)

Powered by blists - more mailing lists