[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240126-x13s-touchscreen-v2-2-5374ccc9e10d@quicinc.com>
Date: Fri, 26 Jan 2024 08:41:39 -0800
From: Bjorn Andersson <quic_bjorande@...cinc.com>
To: Dmitry Torokhov <dmitry.torokhov@...il.com>,
Rob Herring
<robh+dt@...nel.org>,
Krzysztof Kozlowski
<krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Benjamin Tissoires <benjamin.tissoires@...hat.com>,
Jiri Kosina
<jikos@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio
<konrad.dybcio@...aro.org>,
Johan Hovold <johan+linaro@...nel.org>
CC: <linux-arm-msm@...r.kernel.org>, <linux-input@...r.kernel.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
Konrad Dybcio
<konrad.dybcio@...ainline.org>,
Krzysztof Kozlowski
<krzysztof.kozlowski@...aro.org>,
Bjorn Andersson
<quic_bjorande@...cinc.com>,
Daniel Thompson <daniel.thompson@...aro.org>
Subject: [PATCH v2 2/2] arm64: dts: qcom: sc8280xp-x13s: Fix/enable
touchscreen
The failing read-test in __i2c_hid_core_probe() determines that there's
nothing connected at the documented address of the touchscreen.
Introduce the 5ms after-power and 200ms after-reset delays found in the
ACPI tables. Also wire up the reset-gpio, for good measure.
Fixes: 32c231385ed4 ("arm64: dts: qcom: sc8280xp: add Lenovo Thinkpad X13s devicetree")
Tested-by: Daniel Thompson <daniel.thompson@...aro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@...cinc.com>
---
arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
index def3976bd5bb..33731b95ad51 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
@@ -620,7 +620,6 @@ &i2c4 {
status = "okay";
- /* FIXME: verify */
touchscreen@10 {
compatible = "hid-over-i2c";
reg = <0x10>;
@@ -630,6 +629,11 @@ touchscreen@10 {
vdd-supply = <&vreg_misc_3p3>;
vddl-supply = <&vreg_s10b>;
+ reset-gpios = <&tlmm 99 GPIO_ACTIVE_LOW>;
+
+ post-power-on-delay-ms = <5>;
+ post-reset-deassert-delay-ms = <200>;
+
pinctrl-names = "default";
pinctrl-0 = <&ts0_default>;
};
@@ -1450,7 +1454,6 @@ int-n-pins {
reset-n-pins {
pins = "gpio99";
function = "gpio";
- output-high;
drive-strength = <16>;
};
};
--
2.25.1
Powered by blists - more mailing lists