| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <864b67a3-6a4a-2afb-8275-b8532ea3cb8f@huawei.com>
Date: Sat, 27 Jan 2024 10:07:18 +0800
From: Zhang Yi <yi.zhang@...wei.com>
To: Baokun Li <libaokun1@...wei.com>, <linux-ext4@...r.kernel.org>
CC: <tytso@....edu>, <adilger.kernel@...ger.ca>, <jack@...e.cz>,
<ritesh.list@...il.com>, <linux-kernel@...r.kernel.org>,
<yangerkun@...wei.com>, <chengzhihao1@...wei.com>, <yukuai3@...wei.com>,
<stable@...r.kernel.org>
Subject: Re: [PATCH 4/7] ext4: add positive int attr pointer to avoid sysfs
variables overflow
On 2024/1/26 16:57, Baokun Li wrote:
> We can easily trigger a BUG_ON by using the following commands:
>
> mount /dev/$disk /tmp/test
> echo 2147483650 > /sys/fs/ext4/$disk/mb_group_prealloc
> echo test > /tmp/test/file && sync
>
> ==================================================================
> kernel BUG at fs/ext4/mballoc.c:2029!
> invalid opcode: 0000 [#1] PREEMPT SMP PTI
> CPU: 3 PID: 320 Comm: kworker/u36:1 Not tainted 6.8.0-rc1 #462
> RIP: 0010:mb_mark_used+0x358/0x370
> [...]
> Call Trace:
> ext4_mb_use_best_found+0x56/0x140
> ext4_mb_complex_scan_group+0x196/0x2f0
> ext4_mb_regular_allocator+0xa92/0xf00
> ext4_mb_new_blocks+0x302/0xbc0
> ext4_ext_map_blocks+0x95a/0xef0
> ext4_map_blocks+0x2b1/0x680
> ext4_do_writepages+0x733/0xbd0
> [...]
> ==================================================================
>
> In ext4_mb_normalize_group_request():
> ac->ac_g_ex.fe_len = EXT4_SB(sb)->s_mb_group_prealloc;
>
> Here fe_len is of type int, but s_mb_group_prealloc is of type unsigned
> int, so setting s_mb_group_prealloc to 2147483650 overflows fe_len to a
> negative number, which ultimately triggers a BUG_ON() in mb_mark_used().
>
> Therefore, we add attr_pointer_pi (aka positive int attr pointer) with a
> value range of 0-INT_MAX to avoid the above problem. In addition to the
> mb_group_prealloc sysfs interface, the following interfaces also have uint
> to int conversions that result in overflows, and are also fixed.
>
> err_ratelimit_burst
> msg_ratelimit_burst
> warning_ratelimit_burst
> err_ratelimit_interval_ms
> msg_ratelimit_interval_ms
> warning_ratelimit_interval_ms
> mb_best_avail_max_trim_order
>
> CC: stable@...r.kernel.org
> Signed-off-by: Baokun Li <libaokun1@...wei.com>
Looks good to me.
Reviewed-by: Zhang Yi <yi.zhang@...wei.com>
> ---
> fs/ext4/sysfs.c | 25 +++++++++++++++++--------
> 1 file changed, 17 insertions(+), 8 deletions(-)
>
> diff --git a/fs/ext4/sysfs.c b/fs/ext4/sysfs.c
> index a5d657fa05cb..6f9f96e00f2f 100644
> --- a/fs/ext4/sysfs.c
> +++ b/fs/ext4/sysfs.c
> @@ -30,6 +30,7 @@ typedef enum {
> attr_first_error_time,
> attr_last_error_time,
> attr_feature,
> + attr_pointer_pi,
> attr_pointer_ui,
> attr_pointer_ul,
> attr_pointer_u64,
> @@ -178,6 +179,9 @@ static struct ext4_attr ext4_attr_##_name = { \
> #define EXT4_RO_ATTR_ES_STRING(_name,_elname,_size) \
> EXT4_ATTR_STRING(_name, 0444, _size, ext4_super_block, _elname)
>
> +#define EXT4_RW_ATTR_SBI_PI(_name,_elname) \
> + EXT4_ATTR_OFFSET(_name, 0644, pointer_pi, ext4_sb_info, _elname)
> +
> #define EXT4_RW_ATTR_SBI_UI(_name,_elname) \
> EXT4_ATTR_OFFSET(_name, 0644, pointer_ui, ext4_sb_info, _elname)
>
> @@ -213,17 +217,17 @@ EXT4_RW_ATTR_SBI_UI(mb_max_to_scan, s_mb_max_to_scan);
> EXT4_RW_ATTR_SBI_UI(mb_min_to_scan, s_mb_min_to_scan);
> EXT4_RW_ATTR_SBI_UI(mb_order2_req, s_mb_order2_reqs);
> EXT4_RW_ATTR_SBI_UI(mb_stream_req, s_mb_stream_request);
> -EXT4_RW_ATTR_SBI_UI(mb_group_prealloc, s_mb_group_prealloc);
> +EXT4_RW_ATTR_SBI_PI(mb_group_prealloc, s_mb_group_prealloc);
> EXT4_RW_ATTR_SBI_UI(mb_max_linear_groups, s_mb_max_linear_groups);
> EXT4_RW_ATTR_SBI_UI(extent_max_zeroout_kb, s_extent_max_zeroout_kb);
> EXT4_ATTR(trigger_fs_error, 0200, trigger_test_error);
> -EXT4_RW_ATTR_SBI_UI(err_ratelimit_interval_ms, s_err_ratelimit_state.interval);
> -EXT4_RW_ATTR_SBI_UI(err_ratelimit_burst, s_err_ratelimit_state.burst);
> -EXT4_RW_ATTR_SBI_UI(warning_ratelimit_interval_ms, s_warning_ratelimit_state.interval);
> -EXT4_RW_ATTR_SBI_UI(warning_ratelimit_burst, s_warning_ratelimit_state.burst);
> -EXT4_RW_ATTR_SBI_UI(msg_ratelimit_interval_ms, s_msg_ratelimit_state.interval);
> -EXT4_RW_ATTR_SBI_UI(msg_ratelimit_burst, s_msg_ratelimit_state.burst);
> -EXT4_RW_ATTR_SBI_UI(mb_best_avail_max_trim_order, s_mb_best_avail_max_trim_order);
> +EXT4_RW_ATTR_SBI_PI(err_ratelimit_interval_ms, s_err_ratelimit_state.interval);
> +EXT4_RW_ATTR_SBI_PI(err_ratelimit_burst, s_err_ratelimit_state.burst);
> +EXT4_RW_ATTR_SBI_PI(warning_ratelimit_interval_ms, s_warning_ratelimit_state.interval);
> +EXT4_RW_ATTR_SBI_PI(warning_ratelimit_burst, s_warning_ratelimit_state.burst);
> +EXT4_RW_ATTR_SBI_PI(msg_ratelimit_interval_ms, s_msg_ratelimit_state.interval);
> +EXT4_RW_ATTR_SBI_PI(msg_ratelimit_burst, s_msg_ratelimit_state.burst);
> +EXT4_RW_ATTR_SBI_PI(mb_best_avail_max_trim_order, s_mb_best_avail_max_trim_order);
> #ifdef CONFIG_EXT4_DEBUG
> EXT4_RW_ATTR_SBI_UL(simulate_fail, s_simulate_fail);
> #endif
> @@ -376,6 +380,7 @@ static ssize_t ext4_generic_attr_show(struct ext4_attr *a,
>
> switch (a->attr_id) {
> case attr_inode_readahead:
> + case attr_pointer_pi:
> case attr_pointer_ui:
> if (a->attr_ptr == ptr_ext4_super_block_offset)
> return sysfs_emit(buf, "%u\n", le32_to_cpup(ptr));
> @@ -448,6 +453,10 @@ static ssize_t ext4_generic_attr_store(struct ext4_attr *a,
> return ret;
>
> switch (a->attr_id) {
> + case attr_pointer_pi:
> + if ((int)t < 0)
> + return -EINVAL;
> + fallthrough;
> case attr_pointer_ui:
> if (t != (unsigned int)t)
> return -EINVAL;
>
Powered by blists - more mailing lists