| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20240127074754.2380890-12-yukuai1@huaweicloud.com>
Date: Sat, 27 Jan 2024 15:47:53 +0800
From: Yu Kuai <yukuai1@...weicloud.com>
To: mpatocka@...hat.com,
heinzm@...hat.com,
xni@...hat.com,
agk@...hat.com,
snitzer@...nel.org,
dm-devel@...ts.linux.dev,
song@...nel.org,
yukuai3@...wei.com,
jbrassow@....redhat.com,
neilb@...e.de,
shli@...com,
akpm@...l.org
Cc: linux-kernel@...r.kernel.org,
linux-raid@...r.kernel.org,
yukuai1@...weicloud.com,
yi.zhang@...wei.com,
yangerkun@...wei.com
Subject: [PATCH v3 11/12] md/raid456: fix a deadlock for dm-raid456 while io concurrent with reshape
From: Yu Kuai <yukuai3@...wei.com>
For raid456, if reshape is still in progress, then IO across reshape
position will wait for reshape to make progress. However, for dm-raid,
in following cases reshape will never make progress hence IO will hang:
1) the array is read-only;
2) MD_RECOVERY_WAIT is set;
3) MD_RECOVERY_FROZEN is set;
After commit c467e97f079f ("md/raid6: use valid sector values to determine
if an I/O should wait on the reshape") fix the problem that IO across
reshape position doesn't wait for reshape, the dm-raid test
shell/lvconvert-raid-reshape.sh start to hang:
[root@...ora ~]# cat /proc/979/stack
[<0>] wait_woken+0x7d/0x90
[<0>] raid5_make_request+0x929/0x1d70 [raid456]
[<0>] md_handle_request+0xc2/0x3b0 [md_mod]
[<0>] raid_map+0x2c/0x50 [dm_raid]
[<0>] __map_bio+0x251/0x380 [dm_mod]
[<0>] dm_submit_bio+0x1f0/0x760 [dm_mod]
[<0>] __submit_bio+0xc2/0x1c0
[<0>] submit_bio_noacct_nocheck+0x17f/0x450
[<0>] submit_bio_noacct+0x2bc/0x780
[<0>] submit_bio+0x70/0xc0
[<0>] mpage_readahead+0x169/0x1f0
[<0>] blkdev_readahead+0x18/0x30
[<0>] read_pages+0x7c/0x3b0
[<0>] page_cache_ra_unbounded+0x1ab/0x280
[<0>] force_page_cache_ra+0x9e/0x130
[<0>] page_cache_sync_ra+0x3b/0x110
[<0>] filemap_get_pages+0x143/0xa30
[<0>] filemap_read+0xdc/0x4b0
[<0>] blkdev_read_iter+0x75/0x200
[<0>] vfs_read+0x272/0x460
[<0>] ksys_read+0x7a/0x170
[<0>] __x64_sys_read+0x1c/0x30
[<0>] do_syscall_64+0xc6/0x230
[<0>] entry_SYSCALL_64_after_hwframe+0x6c/0x74
This is because reshape can't make progress.
For md/raid, the problem doesn't exist because register new sync_thread
doesn't rely on the IO to be done any more:
1) If array is read-only, it can switch to read-write by ioctl/sysfs;
2) md/raid never set MD_RECOVERY_WAIT;
3) If MD_RECOVERY_FROZEN is set, mddev_suspend() doesn't hold
'reconfig_mutex', hence it can be cleared and reshape can continue by
sysfs api 'sync_action'.
However, I'm not sure yet how to avoid the problem in dm-raid yet. This
patch detect the above 3 cases in dm_suspend(), and fail those IO
directly. If user really meet the IO error, then it means they're
reading the wrong data before c467e97f079f. And it's safe to read/write
the array after reshape make progress successfully.
Signed-off-by: Yu Kuai <yukuai3@...wei.com>
---
drivers/md/md.h | 2 +-
drivers/md/raid5.c | 32 +++++++++++++++++++++++++++++++-
2 files changed, 32 insertions(+), 2 deletions(-)
diff --git a/drivers/md/md.h b/drivers/md/md.h
index 98da86d38ba8..8e81f9e2fb20 100644
--- a/drivers/md/md.h
+++ b/drivers/md/md.h
@@ -565,7 +565,7 @@ enum md_ro_state {
MD_MAX_STATE
};
-static bool md_is_rdwr(struct mddev *mddev)
+static inline bool md_is_rdwr(struct mddev *mddev)
{
return (mddev->ro == MD_RDWR);
}
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 6a7a32f7fb91..812d7ec64da5 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -5915,6 +5915,13 @@ static int add_all_stripe_bios(struct r5conf *conf,
return ret;
}
+static bool reshape_disabled(struct mddev *mddev)
+{
+ return !md_is_rdwr(mddev) ||
+ test_bit(MD_RECOVERY_WAIT, &mddev->recovery) ||
+ test_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
+}
+
static enum stripe_result make_stripe_request(struct mddev *mddev,
struct r5conf *conf, struct stripe_request_ctx *ctx,
sector_t logical_sector, struct bio *bi)
@@ -5946,7 +5953,8 @@ static enum stripe_result make_stripe_request(struct mddev *mddev,
if (ahead_of_reshape(mddev, logical_sector,
conf->reshape_safe)) {
spin_unlock_irq(&conf->device_lock);
- return STRIPE_SCHEDULE_AND_RETRY;
+ ret = STRIPE_SCHEDULE_AND_RETRY;
+ goto out;
}
}
spin_unlock_irq(&conf->device_lock);
@@ -6025,6 +6033,13 @@ static enum stripe_result make_stripe_request(struct mddev *mddev,
out_release:
raid5_release_stripe(sh);
+out:
+ if (ret == STRIPE_SCHEDULE_AND_RETRY && !mddev->gendisk &&
+ reshape_disabled(mddev)) {
+ bi->bi_status = BLK_STS_IOERR;
+ ret = STRIPE_FAIL;
+ pr_err("dm-raid456: io failed across reshape position while reshape can't make progress");
+ }
return ret;
}
@@ -8909,6 +8924,18 @@ static int raid5_start(struct mddev *mddev)
return r5l_start(conf->log);
}
+/*
+ * This is only used for dm-raid456, caller already frozen sync_thread, hence
+ * if rehsape is still in progress, io that is waiting for reshape can never be
+ * done now, hence wake up and handle those IO.
+ */
+static void raid5_prepare_suspend(struct mddev *mddev)
+{
+ struct r5conf *conf = mddev->private;
+
+ wake_up(&conf->wait_for_overlap);
+}
+
static struct md_personality raid6_personality =
{
.name = "raid6",
@@ -8932,6 +8959,7 @@ static struct md_personality raid6_personality =
.quiesce = raid5_quiesce,
.takeover = raid6_takeover,
.change_consistency_policy = raid5_change_consistency_policy,
+ .prepare_suspend = raid5_prepare_suspend,
};
static struct md_personality raid5_personality =
{
@@ -8956,6 +8984,7 @@ static struct md_personality raid5_personality =
.quiesce = raid5_quiesce,
.takeover = raid5_takeover,
.change_consistency_policy = raid5_change_consistency_policy,
+ .prepare_suspend = raid5_prepare_suspend,
};
static struct md_personality raid4_personality =
@@ -8981,6 +9010,7 @@ static struct md_personality raid4_personality =
.quiesce = raid5_quiesce,
.takeover = raid4_takeover,
.change_consistency_policy = raid5_change_consistency_policy,
+ .prepare_suspend = raid5_prepare_suspend,
};
static int __init raid5_init(void)
--
2.39.2
Powered by blists - more mailing lists