[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240127152853.65937-1-dario.binacchi@amarulasolutions.com>
Date: Sat, 27 Jan 2024 16:28:44 +0100
From: Dario Binacchi <dario.binacchi@...rulasolutions.com>
To: linux-kernel@...r.kernel.org
Cc: linux-amarula@...rulasolutions.com,
Raphael Gallais-Pou <raphael.gallais-pou@...s.st.com>,
Lee Jones <lee@...nel.org>,
Alexandre Torgue <alexandre.torgue@...s.st.com>,
Dario Binacchi <dario.binacchi@...rulasolutions.com>,
Andre Przywara <andre.przywara@....com>,
Conor Dooley <conor+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Leonard Göhrs <l.goehrs@...gutronix.de>,
Linus Walleij <linus.walleij@...aro.org>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Rob Herring <robh+dt@...nel.org>,
Sean Nyekjaer <sean@...nix.com>,
devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-stm32@...md-mailman.stormreply.com
Subject: [PATCH v10 0/5] Add display support for stm32f769-disco board
The series adds display support for the stm32f769-disco board. It has been
tested on hardware revisions MB1225-B03 and MB1166-A09. This required
modifications to the nt35510 driver that have already been applied.
Changes in v10:
- Drop backlight. From a closer analysis of the schematics
en.MB1225-F769I-B01_Schematic.pdf and en.mb1166-default-a09-schematic.pdf,
it is noticed that the GPIO I14 is connected to an unmounted
resistor (n/a), making the backlight functionality via GPIO unusable.
- Drop backlight references
Changes in v9:
- Drop 'interrupts' property to fix yaml checks
- Rename vcc_3v3 to to vcc-3v3
- Rename panel-dsi@0 to panel@0 to fix yaml warnings
- Change commit message
- Rename stm32f769-disco-mb1225-revb03-mb1166-reva09 to
stm32f769-disco-mb1166-reva09
Changes in v8:
- Add Acked-by tag of Lee Jones
- Add Reviewed-by tag of Raphael Gallais-Pou
- Add Reviewed-by tag of Raphael Gallais-Pou
- Remove unit name from 'ltdc/port/endpoint@0' to fix the compiling
warning:
../arch/arm/boot/dts/st/stm32f769-disco.dts:189.28-191.5: Warning
(unit_address_vs_reg): /soc/display-controller@...16800/port/endpoint@0: node
has a unit name, but no reg or ranges property
- Add Reviewed-by tag of Linus Walleij
- Add Reviewed-by tag of Raphael Gallais-Pou
Changes in v7:
- Replace .dts with .dtb in the Makefile
Changes in v6:
- Drop patches
- [5/8] dt-bindings: nt35510: add compatible for FRIDA FRD400B25025-A-CTK
- [7/8] drm/panel: nt35510: move hardwired parameters to configuration
- [8/8] drm/panel: nt35510: support FRIDA FRD400B25025-A-CTK
because applied by the maintainer Linus Walleij
Changes in v5:
- Replace GPIOD_ASIS with GPIOD_OUT_HIGH in the call to devm_gpiod_get_optional().
Changes in v2:
- Add Acked-by tag of Conor Dooley
- Change the status of panel_backlight node to "disabled"
- Delete backlight property from panel0 node.
- Re-write the patch [8/8] "drm/panel: nt35510: support FRIDA FRD400B25025-A-CTK"
in the same style as the original driver.
Dario Binacchi (5):
dt-bindings: mfd: stm32f7: Add binding definition for DSI
ARM: dts: stm32: add DSI support on stm32f769
ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f769-disco
ARM: dts: stm32: add display support on stm32f769-disco
ARM: dts: add stm32f769-disco-mb1166-reva09
arch/arm/boot/dts/st/Makefile | 1 +
.../dts/st/stm32f769-disco-mb1166-reva09.dts | 13 ++++
arch/arm/boot/dts/st/stm32f769-disco.dts | 70 +++++++++++++++++--
arch/arm/boot/dts/st/stm32f769.dtsi | 20 ++++++
include/dt-bindings/mfd/stm32f7-rcc.h | 1 +
5 files changed, 101 insertions(+), 4 deletions(-)
create mode 100644 arch/arm/boot/dts/st/stm32f769-disco-mb1166-reva09.dts
create mode 100644 arch/arm/boot/dts/st/stm32f769.dtsi
--
2.43.0
Powered by blists - more mailing lists