[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240128173352.2714442-1-andreas@kemnade.info>
Date: Sun, 28 Jan 2024 18:33:49 +0100
From: Andreas Kemnade <andreas@...nade.info>
To: marcel@...tmann.org,
johan.hedberg@...il.com,
luiz.dentz@...il.com,
johan@...nel.org,
jirislaby@...nel.org,
andreas@...nade.info,
gregkh@...uxfoundation.org,
linux-kernel@...r.kernel.org,
linux-bluetooth@...r.kernel.org,
Adam Ford <aford173@...il.com>,
Tony Lindgren <tony@...mide.com>,
tomi.valkeinen@...asonboard.com,
Péter Ujfalusi <peter.ujfalusi@...il.com>,
robh@...nel.org,
hns@...delico.com
Subject: [RFC PATCH v2 0/3] bluetooth/gnss: GNSS support for TiWi chips
Some of these chips have GNSS support. In some vendor kernels
a driver on top of misc/ti-st can be found providing a /dev/tigps
device which speaks the secretive Air Independent Interface (AI2) protocol.
To be more compatible with userspace send out NMEA by default but
allow a more raw mode by using a module parameter.
This was tested on the Epson Moverio BT-200.
Changes since V1:
- Set up things for NMEA output
- Powerup/down at open()/close()
- split out logic between drivers/bluetooth and drivers/gnss
- leave out drivers/misc/ti-st driver removal to avoid
filling up mailboxes during the iterations, this series is
still a proof that it is not needed, will take the brush after
this series is accepted.
Andreas Kemnade (3):
gnss: Add AI2 protocol used by some TI combo chips.
bluetooth: ti-st: Add GNSS subdevice for TI Wilink chips
gnss: Add driver for AI2 protocol
drivers/bluetooth/hci_ll.c | 81 ++++++
drivers/gnss/Kconfig | 13 +
drivers/gnss/Makefile | 3 +
drivers/gnss/ai2.c | 523 +++++++++++++++++++++++++++++++++++
drivers/gnss/core.c | 1 +
include/linux/gnss.h | 1 +
include/linux/ti_wilink_st.h | 8 +
7 files changed, 630 insertions(+)
create mode 100644 drivers/gnss/ai2.c
--
2.39.2
Powered by blists - more mailing lists