[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <84827fd6461c9650443608e33afe9eb011793656.camel@gmail.com>
Date: Mon, 29 Jan 2024 08:55:40 +0100
From: Nuno Sá <noname.nuno@...il.com>
To: Chris Packham <Chris.Packham@...iedtelesis.co.nz>,
"a.zummo@...ertech.it" <a.zummo@...ertech.it>,
"alexandre.belloni@...tlin.com" <alexandre.belloni@...tlin.com>,
"jdelvare@...e.com" <jdelvare@...e.com>, "linux@...ck-us.net"
<linux@...ck-us.net>, "robh+dt@...nel.org" <robh+dt@...nel.org>,
"krzysztof.kozlowski+dt@...aro.org" <krzysztof.kozlowski+dt@...aro.org>
Cc: "linux-rtc@...r.kernel.org" <linux-rtc@...r.kernel.org>,
"linux-kernel@...r.kernel.org"
<linux-kernel@...r.kernel.org>, "linux-hwmon@...r.kernel.org"
<linux-hwmon@...r.kernel.org>, "devicetree@...r.kernel.org"
<devicetree@...r.kernel.org>
Subject: Re: [PATCH v5 0/2] drivers: rtc: add max313xx series rtc driver
On Mon, 2024-01-29 at 03:28 +0000, Chris Packham wrote:
>
> On 26/01/24 20:51, Nuno Sá wrote:
> > On Fri, 2024-01-26 at 02:22 +0000, Chris Packham wrote:
> > > Hi All,
> > >
> > > On 4/04/23 03:43, Ibrahim Tilki wrote:
> > > > changelog:
> > > > since v5:
> > > > - dt-binding: add enum value "2" to aux-voltage-chargable
> > > > - dt-binding: remove adi,trickle-diode-enable
> > > > - dt-binding: change description of trickle-resistor-ohms
> > > > - dt-binding: reorder as in example schema
> > > > - parse "wakeup-source" when irq not requested
> > > > - remove limitation on max31328 irq and clokout
> > > > - remove error and warning messages during trickle charger setup
> > > >
> > > > since v4:
> > > > - dt-binding: remove interrupt names.
> > > > - dt-binding: add description for "interrupts" property
> > > > - dt-binding: replace deprecated property "trickle-diode-disable"
> > > > by "aux-voltage-chargeable"
> > > > - dt-binding: add new property "adi,trickle-diode-enable"
> > > > - dt-binding: remove "wakeup-source"
> > > > - use clear_bit instead of __clear_bit
> > > > - use devm_of_clk_add_hw_provider instead of of_clk_add_provider
> > > > - use chip_desc pointer as driver data instead of enum.
> > > >
> > > > since v3:
> > > > - add "break" to fix warning: unannotated fall-through
> > > > Reported-by: kernel test robot <lkp@...el.com>
> > > >
> > > > since v2:
> > > > - dt-binding: update title and description
> > > > - dt-binding: remove last example
> > > > - drop watchdog support
> > > > - support reading 12Hr format instead of forcing 24hr at probe time
> > > > - use "tm_year % 100" instead of range check
> > > > - refactor max313xx_init for readability
> > > >
> > > > Ibrahim Tilki (2):
> > > > drivers: rtc: add max313xx series rtc driver
> > > > dt-bindings: rtc: add max313xx RTCs
> > > >
> > > > .../devicetree/bindings/rtc/adi,max313xx.yaml | 144 +++
> > > > drivers/rtc/Kconfig | 11 +
> > > > drivers/rtc/Makefile | 1 +
> > > > drivers/rtc/rtc-max313xx.c | 1053
> > > > +++++++++++++++++
> > > > 4 files changed, 1209 insertions(+)
> > > > create mode 100644
> > > > Documentation/devicetree/bindings/rtc/adi,max313xx.yaml
> > > > create mode 100644 drivers/rtc/rtc-max313xx.c
> > > What happened to this series in the end? It kind of went off my radar
> > > and I forgot about it.
> > >
> > > We've been carrying a version of these changes in our local tree for a
> > > while (and using it quite happily I should add).
> > >
> > Hi Chris,
> >
> > Also not sure.... In the meantime Ibrahim left ADI so if this is not in
> > shape to
> > be merged he won't be able to re-spin. If there's a need for a re-spin,
> > please
> > let me know so I can see internally if there's someone who can continue this
> > work. I would do it myself if I had the HW.
> I've got a board with a max31331 so I can test that. I don't have any of
> the interrupts hooked up so I won't be able to test that. Looks like
> there was some outstanding discussion around the trickle-charge
> devicetree properties so I'd need to figure out what was wanted there.
> I'll try to pick up the last series from the mailing list and go from there.
Thanks Chris!
- Nuno Sá
Powered by blists - more mailing lists