| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20240130170556.GA1125757@dev-arch.thelio-3990X>
Date: Tue, 30 Jan 2024 10:05:56 -0700
From: Nathan Chancellor <nathan@...nel.org>
To: Konrad Dybcio <konrad.dybcio@...aro.org>
Cc: Russell King <linux@...linux.org.uk>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Jiri Slaby <jirislaby@...nel.org>,
Marijn Suijten <marijn.suijten@...ainline.org>,
linux-kernel@...r.kernel.org, linux-serial@...r.kernel.org
Subject: Re: [PATCH] tty: serial: amba-pl011: Remove QDF2xxx workarounds
Hi Konrad,
On Mon, Jan 22, 2024 at 03:27:20PM +0100, Konrad Dybcio wrote:
> This SoC family was destined for server use, featuring Qualcomm's very
> interesting Kryo cores (before "Kryo" became a marketing term for Arm
> cores with small modifications). It did however not leave the labs of
> Qualcomm and presumably some partners, nor was it ever productized.
>
> Remove the workarounds, as they are long obsolete.
>
> Signed-off-by: Konrad Dybcio <konrad.dybcio@...aro.org>
> ---
> Compile-tested only
> ---
> drivers/tty/serial/amba-pl011.c | 82 -----------------------------------------
> 1 file changed, 82 deletions(-)
>
> diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
> index fccec1698a54..c4df9cbc264b 100644
> --- a/drivers/tty/serial/amba-pl011.c
> +++ b/drivers/tty/serial/amba-pl011.c
> @@ -152,23 +152,6 @@ static const struct vendor_data vendor_sbsa = {
> .fixed_options = true,
> };
>
> -#ifdef CONFIG_ACPI_SPCR_TABLE
> -static const struct vendor_data vendor_qdt_qdf2400_e44 = {
> - .reg_offset = pl011_std_offsets,
> - .fr_busy = UART011_FR_TXFE,
> - .fr_dsr = UART01x_FR_DSR,
> - .fr_cts = UART01x_FR_CTS,
> - .fr_ri = UART011_FR_RI,
> - .inv_fr = UART011_FR_TXFE,
> - .access_32b = true,
> - .oversampling = false,
> - .dma_threshold = false,
> - .cts_event_workaround = false,
> - .always_enabled = true,
> - .fixed_options = true,
> -};
> -#endif
> -
> static u16 pl011_st_offsets[REG_ARRAY_SIZE] = {
> [REG_DR] = UART01x_DR,
> [REG_ST_DMAWM] = ST_UART011_DMAWM,
> @@ -2468,15 +2451,6 @@ static int pl011_console_match(struct console *co, char *name, int idx,
> resource_size_t addr;
> int i;
>
> - /*
> - * Systems affected by the Qualcomm Technologies QDF2400 E44 erratum
> - * have a distinct console name, so make sure we check for that.
> - * The actual implementation of the erratum occurs in the probe
> - * function.
> - */
> - if ((strcmp(name, "qdf2400_e44") != 0) && (strcmp(name, "pl011") != 0))
> - return -ENODEV;
> -
> if (uart_parse_earlycon(options, &iotype, &addr, &options))
> return -ENODEV;
>
> @@ -2517,22 +2491,6 @@ static struct console amba_console = {
>
> #define AMBA_CONSOLE (&amba_console)
>
> -static void qdf2400_e44_putc(struct uart_port *port, unsigned char c)
> -{
> - while (readl(port->membase + UART01x_FR) & UART01x_FR_TXFF)
> - cpu_relax();
> - writel(c, port->membase + UART01x_DR);
> - while (!(readl(port->membase + UART01x_FR) & UART011_FR_TXFE))
> - cpu_relax();
> -}
> -
> -static void qdf2400_e44_early_write(struct console *con, const char *s, unsigned int n)
> -{
> - struct earlycon_device *dev = con->data;
> -
> - uart_console_write(&dev->port, s, n, qdf2400_e44_putc);
> -}
> -
> static void pl011_putc(struct uart_port *port, unsigned char c)
> {
> while (readl(port->membase + UART01x_FR) & UART01x_FR_TXFF)
> @@ -2611,29 +2569,6 @@ OF_EARLYCON_DECLARE(pl011, "arm,pl011", pl011_early_console_setup);
>
> OF_EARLYCON_DECLARE(pl011, "arm,sbsa-uart", pl011_early_console_setup);
>
> -/*
> - * On Qualcomm Datacenter Technologies QDF2400 SOCs affected by
> - * Erratum 44, traditional earlycon can be enabled by specifying
> - * "earlycon=qdf2400_e44,<address>". Any options are ignored.
> - *
> - * Alternatively, you can just specify "earlycon", and the early console
> - * will be enabled with the information from the SPCR table. In this
> - * case, the SPCR code will detect the need for the E44 work-around,
> - * and set the console name to "qdf2400_e44".
> - */
> -static int __init
> -qdf2400_e44_early_console_setup(struct earlycon_device *device,
> - const char *opt)
> -{
> - if (!device->port.membase)
> - return -ENODEV;
> -
> - device->con->write = qdf2400_e44_early_write;
> - return 0;
> -}
> -
> -EARLYCON_DECLARE(qdf2400_e44, qdf2400_e44_early_console_setup);
> -
> #else
> #define AMBA_CONSOLE NULL
> #endif
> @@ -2869,22 +2804,6 @@ static int pl011_resume(struct device *dev)
>
> static SIMPLE_DEV_PM_OPS(pl011_dev_pm_ops, pl011_suspend, pl011_resume);
>
> -#ifdef CONFIG_ACPI_SPCR_TABLE
> -static void qpdf2400_erratum44_workaround(struct device *dev,
> - struct uart_amba_port *uap)
> -{
> - if (!qdf2400_e44_present)
> - return;
> -
> - dev_info(dev, "working around QDF2400 SoC erratum 44\n");
> - uap->vendor = &vendor_qdt_qdf2400_e44;
> -}
> -#else
> -static void qpdf2400_erratum44_workaround(struct device *dev,
> - struct uart_amba_port *uap)
> -{ /* empty */ }
> -#endif
> -
> static int sbsa_uart_probe(struct platform_device *pdev)
> {
> struct uart_amba_port *uap;
> @@ -2921,7 +2840,6 @@ static int sbsa_uart_probe(struct platform_device *pdev)
> uap->port.irq = ret;
>
> uap->vendor = &vendor_sbsa;
> - qpdf2400_erratum44_workaround(&pdev->dev, uap);
>
> uap->reg_offset = uap->vendor->reg_offset;
> uap->fifosize = 32;
>
I just bisected a crash that I see in -next to this change as commit
196f34af2bf4 ("tty: serial: amba-pl011: Remove QDF2xxx workarounds"). I
see it when booting both ARCH=arm multi_v7_defconfig and ARCH=arm64
virtconfig.
$ qemu-system-aarch64 \
-display none \
-nodefaults \
-cpu max,pauth-impdef=true \
-machine virt,gic-version=max,virtualization=true \
-append 'console=ttyAMA0 earlycon' \
-kernel arch/arm64/boot/Image.gz \
-initrd rootfs.cpio \
-m 512m \
-serial mon:stdio
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x000f0510]
[ 0.000000] Linux version 6.8.0-rc1-00096-g196f34af2bf4 (nathan@...-arch.thelio-3990X) (aarch64-linux-gcc (GCC) 13.2.0, GNU ld (GNU Binutils) 2.41) #1 SMP PREEMPT Tue Jan 30 09:42:53 MST 2024
..
[ 0.210400] Serial: AMBA PL011 UART driver
[ 0.245810] 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 14, base_baud = 0) is a PL011 rev1
[ 0.246789] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
[ 0.247015] Mem abort info:
[ 0.247090] ESR = 0x0000000096000004
[ 0.247204] EC = 0x25: DABT (current EL), IL = 32 bits
[ 0.247338] SET = 0, FnV = 0
[ 0.247423] EA = 0, S1PTW = 0
[ 0.247512] FSC = 0x04: level 0 translation fault
[ 0.247637] Data abort info:
[ 0.247717] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
[ 0.247849] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 0.247975] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 0.248135] [0000000000000000] user address but active_mm is swapper
[ 0.248391] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
[ 0.248651] Modules linked in:
[ 0.249219] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.8.0-rc1-00096-g196f34af2bf4 #1
[ 0.249514] Hardware name: linux,dummy-virt (DT)
[ 0.249757] pstate: 41400009 (nZcv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
[ 0.249985] pc : __pi_strncmp+0x20/0x1b4
[ 0.250611] lr : uart_parse_earlycon+0x34/0x174
[ 0.250765] sp : ffff80008000b780
[ 0.250869] x29: ffff80008000b780 x28: ffff000001c07b10 x27: ffffd8d528b2bfb0
[ 0.251188] x26: ffff000001d57850 x25: 0000000000000000 x24: ffff000001ea8100
[ 0.251410] x23: ffff000001ed5800 x22: ffff80008000b7ef x21: ffff80008000b7f0
[ 0.251636] x20: ffff80008000b7d8 x19: 0000000000000000 x18: 0000000000000006
[ 0.251855] x17: 203d20647561625f x16: 65736162202c3431 x15: 203d207172692820
[ 0.252074] x14: 3030303030303978 x13: 0000000000000000 x12: 00000000000001b9
[ 0.252293] x11: 0101010101010101 x10: ffffd8d528f48770 x9 : ffffd8d528ef0770
[ 0.252531] x8 : ffffd8d528ac3c80 x7 : ffffd8d528f48770 x6 : 0000000000000000
[ 0.252750] x5 : ffff000001ed5480 x4 : ffffd8d5280f4184 x3 : ffff80008000b7d8
[ 0.252968] x2 : 0000000000000005 x1 : ffffd8d528ac3c80 x0 : 0000000000000000
[ 0.253257] Call trace:
[ 0.253439] __pi_strncmp+0x20/0x1b4
[ 0.253642] pl011_console_match+0x44/0xd4
[ 0.253792] try_enable_preferred_console+0x5c/0x10c
[ 0.253940] register_console+0x124/0x438
[ 0.254062] serial_core_register_port+0x618/0x654
[ 0.254200] serial_ctrl_register_port+0x10/0x1c
[ 0.254334] uart_add_one_port+0x10/0x1c
[ 0.254452] pl011_register_port+0x68/0x11c
[ 0.254574] pl011_probe+0x1a8/0x1dc
[ 0.254682] amba_probe+0x110/0x1c4
[ 0.254791] really_probe+0x148/0x2b0
[ 0.254909] __driver_probe_device+0x78/0x12c
[ 0.255037] driver_probe_device+0x3c/0x15c
[ 0.255160] __device_attach_driver+0xb8/0x134
[ 0.255289] bus_for_each_drv+0x84/0xe0
[ 0.255404] __device_attach+0x9c/0x188
[ 0.255519] device_initial_probe+0x14/0x20
[ 0.255644] bus_probe_device+0xac/0xb0
[ 0.255762] device_add+0x600/0x7b8
[ 0.255868] amba_device_add+0x4c/0xb8
[ 0.255981] of_platform_bus_create+0x2bc/0x37c
[ 0.256116] of_platform_populate+0x50/0xfc
[ 0.256240] of_platform_default_populate_init+0xe0/0x100
[ 0.256395] do_one_initcall+0x7c/0x1c0
[ 0.256511] kernel_init_freeable+0x1c0/0x288
[ 0.256642] kernel_init+0x24/0x1dc
[ 0.256754] ret_from_fork+0x10/0x20
[ 0.257091] Code: f240091f 9240080d 540004c1 b500030d (f8408403)
[ 0.257519] ---[ end trace 0000000000000000 ]---
[ 0.258252] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
[ 0.258698] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]---
If there is any more information I can provide or patches I can test,
please let me know.
Cheers,
Nathan
# bad: [41d66f96d0f15a0a2ad6fa2208f6bac1a66cbd52] Add linux-next specific files for 20240130
# good: [41bccc98fb7931d63d03f326a746ac4d429c1dd3] Linux 6.8-rc2
git bisect start '41d66f96d0f15a0a2ad6fa2208f6bac1a66cbd52' '41bccc98fb7931d63d03f326a746ac4d429c1dd3'
# good: [f3f89885646036e16b325aea597fc9f375f1a56a] Merge branch 'main' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git
git bisect good f3f89885646036e16b325aea597fc9f375f1a56a
# good: [8042d32dd6c3730b0b4c8c9c811e204ed9f5f829] Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git
git bisect good 8042d32dd6c3730b0b4c8c9c811e204ed9f5f829
# bad: [f0edba72fe5ae932877f49796aaef8adf1a2eb8c] Merge branch 'togreg' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git
git bisect bad f0edba72fe5ae932877f49796aaef8adf1a2eb8c
# good: [549632942a27cc3987473f8a8629200bc2ab0734] Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt.git
git bisect good 549632942a27cc3987473f8a8629200bc2ab0734
# good: [92e32ed303a6c4dc5a5ad9ec54785a6245bcd8fa] tty: serial: samsung: change return type for s3c24xx_serial_rx_fifocnt()
git bisect good 92e32ed303a6c4dc5a5ad9ec54785a6245bcd8fa
# good: [41b5684e58b1286ae0fa180bc50b661a27efee33] dt-bindings: iio: adc: rtq6056: add support for the whole RTQ6056 family
git bisect good 41b5684e58b1286ae0fa180bc50b661a27efee33
# bad: [098396f23ede72c3140a5ba33db38b130385a5fd] Merge branch 'habanalabs-next' of git://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux.git
git bisect bad 098396f23ede72c3140a5ba33db38b130385a5fd
# bad: [fccc9d9233f918ee50cf2955ae7134a7f3418351] tty: serial: uartps: Add rs485 support to uartps driver
git bisect bad fccc9d9233f918ee50cf2955ae7134a7f3418351
# bad: [59fdea965eee9908d904b94828c69f641f1e92fa] serial: txx9: Add missing #include <asm/txx9/generic.h>
git bisect bad 59fdea965eee9908d904b94828c69f641f1e92fa
# good: [79821c8a45807655c25d6bae2b13a3f98a5c01cd] tty: serial: samsung: shrink memory footprint of ``struct s3c24xx_uart_info``
git bisect good 79821c8a45807655c25d6bae2b13a3f98a5c01cd
# bad: [196f34af2bf4c87ac4299a9775503d81b446980c] tty: serial: amba-pl011: Remove QDF2xxx workarounds
git bisect bad 196f34af2bf4c87ac4299a9775503d81b446980c
# good: [09aec324b60f4309eeba8d2d5c897e882cce23bc] dt-bindings: serial: fsl-lpuart: support i.MX95
git bisect good 09aec324b60f4309eeba8d2d5c897e882cce23bc
# first bad commit: [196f34af2bf4c87ac4299a9775503d81b446980c] tty: serial: amba-pl011: Remove QDF2xxx workarounds
Powered by blists - more mailing lists