lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240130-topic-chipcap2-v6-0-260bea05cf9b@gmail.com>
Date: Tue, 30 Jan 2024 22:06:43 +0100
From: Javier Carrasco <javier.carrasco.cruz@...il.com>
To: Rob Herring <robh+dt@...nel.org>, 
 Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>, 
 Conor Dooley <conor+dt@...nel.org>, Jean Delvare <jdelvare@...e.com>, 
 Guenter Roeck <linux@...ck-us.net>, Jonathan Corbet <corbet@....net>, 
 Liam Girdwood <lgirdwood@...il.com>, Mark Brown <broonie@...nel.org>
Cc: Rob Herring <robh@...nel.org>, devicetree@...r.kernel.org, 
 linux-kernel@...r.kernel.org, linux-hwmon@...r.kernel.org, 
 linux-doc@...r.kernel.org, Javier Carrasco <javier.carrasco.cruz@...il.com>, 
 Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>, 
 Conor Dooley <conor.dooley@...rochip.com>
Subject: [PATCH v6 0/5] hwmon: Add support for Amphenol ChipCap 2

This series adds support and documentation for the Amphenol ChipCap 2
humidity and temperature sensor in its digital version.

The Chipcap 2 is an I2C device that provides 14-bit humidity and
temperature measurements as well as low (minimum) and high (maximum)
humidity alarms. A ready signal is also available to reduce delays
while fetching data.

The proposed driver implements the logic to perform measurements with
and without ready signal, EEPROM configuration and alarm signaling.

The features this driver does not support (I2C address and command
window length modification) have been documented in the "Known Issues"
section.

The complete supported functionality has been tested with a CC2D33S
sensor connected to a Raspberry Pi Zero 2 w.
Different device tree node definitions (with and without ready and/or
alarm signals) have been positively tested.

Signed-off-by: Javier Carrasco <javier.carrasco.cruz@...il.com>
---
Changes in v6:
- chipcap2.c: remove TODO about regulator delays (handled by the
  regulator core).
- chipcap2.c: add comment to clarify regularor enable checks (exclusive
  regulator).
- chipcap2.c: simplify irq handling (irqs disabled while the device is
  switched off).
- Link to v5: https://lore.kernel.org/r/20240115-topic-chipcap2-v5-0-0cc7a15aeece@gmail.com

Changes in v5:
- dt-bindings: add "amphenol,cc2d23" to "compatible" in the example.
- Link to v4: https://lore.kernel.org/r/20231020-topic-chipcap2-v4-0-7940cfa7613a@gmail.com

Changes in v4:
- chipcap2.c: require exclusive regulator to trigger command mode.
- chipcap2.c: keep the device off until a measurement is required.
  Because the device makes an automatic measurement after the power-up
  sequence, no differentiation between sleep and non-sleep modes is
  required anymore.
- chipcap2.c: retrieve alarm settings from the device instead of storing
  them locally.
- dt-bindings: add vdd-supply to required properties.
- dt-bindings: default to 'amphenol,cc2d23' compatible (same
  functionality for all compatibles).
- Link to v3: https://lore.kernel.org/r/20231020-topic-chipcap2-v3-0-5b3bb50a5f0b@gmail.com

Changes in v3:
- ABI: sysfs-class-hwmon: documented humidity min/max alarms.
- General: reorder patches (bindings first to remove checkpatch
  warnings).
- General: remove part number wildcards and use real part numbers.
- chipcap2.c: improve error path in probe function.
- chipcap2.c: fix error handling if regulator could not be registered.
- chipcap2.c: use absolute values for hysteresis (for both ABI
  compatibility and simplicity).
- chipcap2.c: minor code-style fixes and variable renaming.
- Link to v2: https://lore.kernel.org/r/20231020-topic-chipcap2-v2-0-f5c325966fdb@gmail.com

Changes in v2:
- vendor-prefixes: full company name in the vendor description (Krzystof
  Kozlowski)
- chipcap2.c: proper i2c_device_id table, coding style fixes, cleaner
  error path in the probe function (Krzystof Kozlowski)
- dt-bindings: per-item description and lowercase names (Krzystof
  Kozlowski)
- MAINTAINERS: fix manufacturer name (Krzystof Kozlowski)
- Link to v1: https://lore.kernel.org/r/20231020-topic-chipcap2-v1-0-087e21d4b1ed@gmail.com

---
Javier Carrasco (5):
      dt-bindings: vendor-prefixes: add Amphenol
      hwmon: (core) Add support for humidity min/max alarm
      ABI: sysfs-class-hwmon: add descriptions for humidity min/max alarms
      dt-bindings: hwmon: Add Amphenol ChipCap 2
      hwmon: Add support for Amphenol ChipCap 2

 Documentation/ABI/testing/sysfs-class-hwmon        |  18 +
 .../bindings/hwmon/amphenol,chipcap2.yaml          |  77 ++
 .../devicetree/bindings/vendor-prefixes.yaml       |   2 +
 Documentation/hwmon/chipcap2.rst                   |  73 ++
 Documentation/hwmon/index.rst                      |   1 +
 MAINTAINERS                                        |   8 +
 drivers/hwmon/Kconfig                              |  10 +
 drivers/hwmon/Makefile                             |   1 +
 drivers/hwmon/chipcap2.c                           | 816 +++++++++++++++++++++
 drivers/hwmon/hwmon.c                              |   2 +
 include/linux/hwmon.h                              |   4 +
 11 files changed, 1012 insertions(+)
---
base-commit: 6613476e225e090cc9aad49be7fa504e290dd33d
change-id: 20231020-topic-chipcap2-e2d8985430c2

Best regards,
-- 
Javier Carrasco <javier.carrasco.cruz@...il.com>


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ