linux-kernel - Re: [PATCH v3 3/7] clk: samsung: gs101: add support for cmu

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <3e078f39-ccd4-4bf4-b11c-5160cc1f0221@linaro.org>
Date: Tue, 30 Jan 2024 08:59:57 +0000
From: Tudor Ambarus <tudor.ambarus@...aro.org>
To: André Draszik <andre.draszik@...aro.org>,
 peter.griffin@...aro.org, mturquette@...libre.com, sboyd@...nel.org,
 robh+dt@...nel.org, krzysztof.kozlowski+dt@...aro.org, conor+dt@...nel.org
Cc: linux-kernel@...r.kernel.org, kernel-team@...roid.com,
 willmcvicker@...gle.com, semen.protsenko@...aro.org,
 alim.akhtar@...sung.com, s.nawrocki@...sung.com, tomasz.figa@...il.com,
 cw00.choi@...sung.com, linux-arm-kernel@...ts.infradead.org,
 linux-samsung-soc@...r.kernel.org, linux-clk@...r.kernel.org,
 devicetree@...r.kernel.org
Subject: Re: [PATCH v3 3/7] clk: samsung: gs101: add support for cmu_peric1



On 1/29/24 17:46, André Draszik wrote:
> CMU_PERIC1 is the clock management unit used for the peric1 block which
> is used for additional USI, I3C and PWM interfaces/busses. Add support
> for muxes, dividers and gates of cmu_peric1, except for
> CLK_GOUT_PERIC1_IP which isn't well described in the datasheet and
> which downstream also ignores (similar to cmu_peric0).
> 
> Two clocks have been marked as CLK_IS_CRITICAL for the following
> reason:
>     * disabling them makes it impossible to access any peric1
>       registers, (including those two registers).
>     * disabling gout_peric1_lhm_axi_p_peric1_i_clk sometimes has the
>       additional effect of making the whole system unresponsive.
> 
> One clock marked as CLK_IGNORE_UNUSED needs to be kept on until we have
> updated the respective driver for the following reason:
>     * gout_peric1_gpio_peric1_pclk is required by the pinctrl
>       configuration. With this clock disabled, reconfiguring the pins
>       (for USI/I2C, USI/UART) will hang during register access.
>       Since pinctrl-samsung doesn't support a clock at the moment, we
>       just keep the kernel from disabling it at boot, until we have an
>       update for pinctrl-samsung, at which point we'll drop the flag.
> 
> Signed-off-by: André Draszik <andre.draszik@...aro.org>
> Reviewed-by: Sam Protsenko <semen.protsenko@...aro.org>
> Reviewed-by: Peter Griffin <peter.griffin@...aro.org>
> 

Looks good to me:

Reviewed-by: Tudor Ambarus <tudor.ambarus@...aro.org>