lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240130111234.1244-1-quic_snehshah@quicinc.com>
Date: Tue, 30 Jan 2024 16:42:34 +0530
From: Sneh Shah <quic_snehshah@...cinc.com>
To: Vinod Koul <vkoul@...nel.org>, Bhupesh Sharma <bhupesh.sharma@...aro.org>,
        Alexandre Torgue <alexandre.torgue@...s.st.com>,
        Jose Abreu <joabreu@...opsys.com>,
        "David S. Miller" <davem@...emloft.net>,
        Eric Dumazet <edumazet@...gle.com>, Jakub Kicinski <kuba@...nel.org>,
        Paolo Abeni <pabeni@...hat.com>,
        Maxime Coquelin <mcoquelin.stm32@...il.com>, netdev@...r.kernel.org,
        linux-arm-msm@...r.kernel.org,
        linux-stm32@...md-mailman.stormreply.com,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Cc: Sneh Shah <quic_snehshah@...cinc.com>, kernel@...cinc.com,
        Andrew Halaney <ahalaney@...hat.com>
Subject: [PATCH net-next v3] net: stmmac: dwmac-qcom-ethqos: Add support for 2.5G SGMII

Serdes phy needs to operate at 2500 mode for 2.5G speed and 1000
mode for 1G/100M/10M speed.
Added changes to configure serdes phy and mac based on link speed.
Changing serdes phy speed involves multiple register writes for
serdes block. To avoid redundant write opertions only update serdes
phy when new speed is different.

Signed-off-by: Sneh Shah <quic_snehshah@...cinc.com>
---
v3 changelog:
- updated commit message
---
v2 changelog:
- updated stmmac_pcs_ane to support autoneg disable
- Update serdes speed to 1000 for 100M and 10M also
---
 .../stmicro/stmmac/dwmac-qcom-ethqos.c        | 27 +++++++++++++++++++
 .../net/ethernet/stmicro/stmmac/stmmac_pcs.h  |  2 ++
 2 files changed, 29 insertions(+)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
index 31631e3f89d0..3ead32cd49a4 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
@@ -106,6 +106,7 @@ struct qcom_ethqos {
 	struct clk *link_clk;
 	struct phy *serdes_phy;
 	unsigned int speed;
+	int serdes_speed;
 	phy_interface_t phy_mode;
 
 	const struct ethqos_emac_por *por;
@@ -608,17 +609,38 @@ static int ethqos_configure_sgmii(struct qcom_ethqos *ethqos)
 {
 	int val;
 
+	struct platform_device *pdev = ethqos->pdev;
+	struct net_device *dev = platform_get_drvdata(pdev);
+	struct stmmac_priv *priv = netdev_priv(dev);
 	val = readl(ethqos->mac_base + MAC_CTRL_REG);
 
 	switch (ethqos->speed) {
+	case SPEED_2500:
+		val &= ~ETHQOS_MAC_CTRL_PORT_SEL;
+		rgmii_updatel(ethqos, RGMII_CONFIG2_RGMII_CLK_SEL_CFG,
+			      RGMII_CONFIG2_RGMII_CLK_SEL_CFG,
+			      RGMII_IO_MACRO_CONFIG2);
+		if (ethqos->serdes_speed != SPEED_2500)
+			phy_set_speed(ethqos->serdes_phy, SPEED_2500);
+		ethqos->serdes_speed = SPEED_2500;
+		stmmac_pcs_ctrl_ane(priv, priv->ioaddr, 0, 0, 0);
+		break;
 	case SPEED_1000:
 		val &= ~ETHQOS_MAC_CTRL_PORT_SEL;
 		rgmii_updatel(ethqos, RGMII_CONFIG2_RGMII_CLK_SEL_CFG,
 			      RGMII_CONFIG2_RGMII_CLK_SEL_CFG,
 			      RGMII_IO_MACRO_CONFIG2);
+		if (ethqos->serdes_speed != SPEED_1000)
+			phy_set_speed(ethqos->serdes_phy, SPEED_1000);
+		ethqos->serdes_speed = SPEED_1000;
+		stmmac_pcs_ctrl_ane(priv, priv->ioaddr, 1, 0, 0);
 		break;
 	case SPEED_100:
 		val |= ETHQOS_MAC_CTRL_PORT_SEL | ETHQOS_MAC_CTRL_SPEED_MODE;
+		if (ethqos->serdes_speed != SPEED_1000)
+			phy_set_speed(ethqos->serdes_phy, SPEED_1000);
+		ethqos->serdes_speed = SPEED_1000;
+		stmmac_pcs_ctrl_ane(priv, priv->ioaddr, 1, 0, 0);
 		break;
 	case SPEED_10:
 		val |= ETHQOS_MAC_CTRL_PORT_SEL;
@@ -627,6 +649,10 @@ static int ethqos_configure_sgmii(struct qcom_ethqos *ethqos)
 			      FIELD_PREP(RGMII_CONFIG_SGMII_CLK_DVDR,
 					 SGMII_10M_RX_CLK_DVDR),
 			      RGMII_IO_MACRO_CONFIG);
+		if (ethqos->serdes_speed != SPEED_1000)
+			phy_set_speed(ethqos->serdes_phy, ethqos->speed);
+		ethqos->serdes_speed = SPEED_1000;
+		stmmac_pcs_ctrl_ane(priv, priv->ioaddr, 1, 0, 0);
 		break;
 	}
 
@@ -799,6 +825,7 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
 				     "Failed to get serdes phy\n");
 
 	ethqos->speed = SPEED_1000;
+	ethqos->serdes_speed = SPEED_1000;
 	ethqos_update_link_clk(ethqos, SPEED_1000);
 	ethqos_set_func_clk_en(ethqos);
 
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_pcs.h b/drivers/net/ethernet/stmicro/stmmac/stmmac_pcs.h
index aefc121464b5..13a30e6df4c1 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_pcs.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_pcs.h
@@ -110,6 +110,8 @@ static inline void dwmac_ctrl_ane(void __iomem *ioaddr, u32 reg, bool ane,
 	/* Enable and restart the Auto-Negotiation */
 	if (ane)
 		value |= GMAC_AN_CTRL_ANE | GMAC_AN_CTRL_RAN;
+	else
+		value &= ~GMAC_AN_CTRL_ANE;
 
 	/* In case of MAC-2-MAC connection, block is configured to operate
 	 * according to MAC conf register.
-- 
2.17.1


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ