lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <af43a3ef-318a-4b7a-8b33-4897fe5a90d9@kernel.org>
Date: Tue, 30 Jan 2024 14:08:04 +0200
From: Roger Quadros <rogerq@...nel.org>
To: Andrew Davis <afd@...com>, nm@...com, vigneshr@...com
Cc: kristo@...nel.org, robh+dt@...nel.org, krzysztof.kozlowski+dt@...aro.org,
 conor+dt@...nel.org, srk@...com, linux-arm-kernel@...ts.infradead.org,
 devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 1/2] arm64: dts: ti: k3-am62/a/p: use sub-node for
 USB_PHY_CTRL registers



On 26/01/2024 17:00, Andrew Davis wrote:
> On 1/26/24 6:59 AM, Roger Quadros wrote:
>> Exposing the entire CTRL_MMR space to syscon is not a good idea.
>> Add sub-nodes for USB0_PHY_CTRL and USB1_PHY_CTRL and use them
>> in the USB0/USB1 nodes.
>>
>> Signed-off-by: Roger Quadros <rogerq@...nel.org>
>> ---
>>   arch/arm64/boot/dts/ti/k3-am62-main.dtsi    |  4 ++--
>>   arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi  | 10 ++++++++++
>>   arch/arm64/boot/dts/ti/k3-am62a-main.dtsi   |  4 ++--
>>   arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi | 10 ++++++++++
>>   arch/arm64/boot/dts/ti/k3-am62p-wakeup.dtsi | 10 ++++++++++
>>   5 files changed, 34 insertions(+), 4 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
>> index 464b7565d085..9432ed344d52 100644
>> --- a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
>> +++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
>> @@ -625,7 +625,7 @@ usbss0: dwc3-usb@...0000 {
>>           reg = <0x00 0x0f900000 0x00 0x800>;
>>           clocks = <&k3_clks 161 3>;
>>           clock-names = "ref";
>> -        ti,syscon-phy-pll-refclk = <&wkup_conf 0x4008>;
>> +        ti,syscon-phy-pll-refclk = <&usb0_phy_ctrl 0x0>;
>>           #address-cells = <2>;
>>           #size-cells = <2>;
>>           power-domains = <&k3_pds 178 TI_SCI_PD_EXCLUSIVE>;
>> @@ -648,7 +648,7 @@ usbss1: dwc3-usb@...0000 {
>>           reg = <0x00 0x0f910000 0x00 0x800>;
>>           clocks = <&k3_clks 162 3>;
>>           clock-names = "ref";
>> -        ti,syscon-phy-pll-refclk = <&wkup_conf 0x4018>;
>> +        ti,syscon-phy-pll-refclk = <&usb1_phy_ctrl 0x0>;
>>           #address-cells = <2>;
>>           #size-cells = <2>;
>>           power-domains = <&k3_pds 179 TI_SCI_PD_EXCLUSIVE>;
>> diff --git a/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi
>> index fef76f52a52e..bd09662a3c29 100644
>> --- a/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi
>> +++ b/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi
>> @@ -19,6 +19,16 @@ chipid: chipid@14 {
>>               compatible = "ti,am654-chipid";
>>               reg = <0x14 0x4>;
>>           };
>> +
>> +        usb0_phy_ctrl: syscon@...8 {
>> +            compatible = "syscon";
> 
> You'll want to add a binding for this to the simple syscon list.
> See this patch for an example[0]. Otherwise this gives a DT check
> warning.

Thanks for the hint. Will fix.

> 
> Also, adding the new nodes for AM62p should be moved to the
> next patch in this series. Fixing AM62 and AM62a should be
> a standalone patch.

Agreed.

> 
> Andrew
> 
> [0] commit cb523495ee2a ("dt-bindings: mfd: syscon: Add ti,am654-dss-oldi-io-ctrl compatible")
> 
>> +            reg = <0x4008 0x4>;
>> +        };
>> +
>> +        usb1_phy_ctrl: syscon@...8 {
>> +            compatible = "syscon";
>> +            reg = <0x4018 0x4>;
>> +        };
>>       };
>>         wkup_uart0: serial@...00000 {
>> diff --git a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
>> index f0b8c9ab1459..8311c7c44cd3 100644
>> --- a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
>> +++ b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
>> @@ -566,7 +566,7 @@ usbss0: dwc3-usb@...0000 {
>>           reg = <0x00 0x0f900000 0x00 0x800>;
>>           clocks = <&k3_clks 161 3>;
>>           clock-names = "ref";
>> -        ti,syscon-phy-pll-refclk = <&wkup_conf 0x4008>;
>> +        ti,syscon-phy-pll-refclk = <&usb0_phy_ctrl 0x0>;
>>           #address-cells = <2>;
>>           #size-cells = <2>;
>>           power-domains = <&k3_pds 178 TI_SCI_PD_EXCLUSIVE>;
>> @@ -589,7 +589,7 @@ usbss1: dwc3-usb@...0000 {
>>           reg = <0x00 0x0f910000 0x00 0x800>;
>>           clocks = <&k3_clks 162 3>;
>>           clock-names = "ref";
>> -        ti,syscon-phy-pll-refclk = <&wkup_conf 0x4018>;
>> +        ti,syscon-phy-pll-refclk = <&usb1_phy_ctrl 0x0>;
>>           #address-cells = <2>;
>>           #size-cells = <2>;
>>           power-domains = <&k3_pds 179 TI_SCI_PD_EXCLUSIVE>;
>> diff --git a/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi
>> index 4e8279fa01e1..26e9fd9da78f 100644
>> --- a/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi
>> +++ b/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi
>> @@ -17,6 +17,16 @@ chipid: chipid@14 {
>>               compatible = "ti,am654-chipid";
>>               reg = <0x14 0x4>;
>>           };
>> +
>> +        usb0_phy_ctrl: syscon@...8 {
>> +            compatible = "syscon";
>> +            reg = <0x4008 0x4>;
>> +        };
>> +
>> +        usb1_phy_ctrl: syscon@...8 {
>> +            compatible = "syscon";
>> +            reg = <0x4018 0x4>;
>> +        };
>>       };
>>         wkup_uart0: serial@...00000 {
>> diff --git a/arch/arm64/boot/dts/ti/k3-am62p-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-wakeup.dtsi
>> index 19f42b39394e..0893e63c399a 100644
>> --- a/arch/arm64/boot/dts/ti/k3-am62p-wakeup.dtsi
>> +++ b/arch/arm64/boot/dts/ti/k3-am62p-wakeup.dtsi
>> @@ -18,6 +18,16 @@ chipid: chipid@14 {
>>               reg = <0x14 0x4>;
>>               bootph-all;
>>           };
>> +
>> +        usb0_phy_ctrl: syscon@...8 {
>> +            compatible = "syscon";
>> +            reg = <0x4008 0x4>;
>> +        };
>> +
>> +        usb1_phy_ctrl: syscon@...8 {
>> +            compatible = "syscon";
>> +            reg = <0x4018 0x4>;
>> +        };
>>       };
>>         wkup_uart0: serial@...00000 {

-- 
cheers,
-roger

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ