| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20240131132600.4067-6-jszhang@kernel.org>
Date: Wed, 31 Jan 2024 21:25:59 +0800
From: Jisheng Zhang <jszhang@...nel.org>
To: Conor Dooley <conor@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Paul Walmsley <paul.walmsley@...ive.com>,
Palmer Dabbelt <palmer@...belt.com>,
Albert Ou <aou@...s.berkeley.edu>,
Emil Renner Berthing <kernel@...il.dk>
Cc: linux-riscv@...ts.infradead.org,
devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH v3 5/6] riscv: dts: starfive: introduce a common board dtsi for jh7110 based boards
This is to prepare for Milkv Mars board dts support in the following
patch. Let's factored out common part into .dtsi.
Signed-off-by: Jisheng Zhang <jszhang@...nel.org>
---
.../jh7110-starfive-visionfive-2.dtsi | 600 +----------------
.../jh7110-visionfive2-mars-common.dtsi | 617 ++++++++++++++++++
2 files changed, 618 insertions(+), 599 deletions(-)
create mode 100644 arch/riscv/boot/dts/starfive/jh7110-visionfive2-mars-common.dtsi
diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
index 974851a764e1..76a2b061a421 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
@@ -5,82 +5,14 @@
*/
/dts-v1/;
-#include "jh7110.dtsi"
-#include "jh7110-pinfunc.h"
-#include <dt-bindings/gpio/gpio.h>
+#include "jh7110-visionfive2-mars-common.dtsi"
/ {
aliases {
- ethernet0 = &gmac0;
ethernet1 = &gmac1;
- i2c0 = &i2c0;
- i2c2 = &i2c2;
- i2c5 = &i2c5;
- i2c6 = &i2c6;
- mmc0 = &mmc0;
- mmc1 = &mmc1;
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- memory@...00000 {
- device_type = "memory";
- reg = <0x0 0x40000000 0x1 0x0>;
- };
-
- gpio-restart {
- compatible = "gpio-restart";
- gpios = <&sysgpio 35 GPIO_ACTIVE_HIGH>;
- priority = <224>;
- };
-
- pwmdac_codec: audio-codec {
- compatible = "linux,spdif-dit";
- #sound-dai-cells = <0>;
- };
-
- sound {
- compatible = "simple-audio-card";
- simple-audio-card,name = "StarFive-PWMDAC-Sound-Card";
- #address-cells = <1>;
- #size-cells = <0>;
-
- simple-audio-card,dai-link@0 {
- reg = <0>;
- format = "left_j";
- bitclock-master = <&sndcpu0>;
- frame-master = <&sndcpu0>;
-
- sndcpu0: cpu {
- sound-dai = <&pwmdac>;
- };
-
- codec {
- sound-dai = <&pwmdac_codec>;
- };
- };
};
};
-&cpus {
- timebase-frequency = <4000000>;
-};
-
-&dvp_clk {
- clock-frequency = <74250000>;
-};
-
-&gmac0_rgmii_rxin {
- clock-frequency = <125000000>;
-};
-
-&gmac0_rmii_refin {
- clock-frequency = <50000000>;
-};
-
&gmac1_rgmii_rxin {
clock-frequency = <125000000>;
};
@@ -89,58 +21,6 @@ &gmac1_rmii_refin {
clock-frequency = <50000000>;
};
-&hdmitx0_pixelclk {
- clock-frequency = <297000000>;
-};
-
-&i2srx_bclk_ext {
- clock-frequency = <12288000>;
-};
-
-&i2srx_lrck_ext {
- clock-frequency = <192000>;
-};
-
-&i2stx_bclk_ext {
- clock-frequency = <12288000>;
-};
-
-&i2stx_lrck_ext {
- clock-frequency = <192000>;
-};
-
-&mclk_ext {
- clock-frequency = <12288000>;
-};
-
-&osc {
- clock-frequency = <24000000>;
-};
-
-&rtc_osc {
- clock-frequency = <32768>;
-};
-
-&tdm_ext {
- clock-frequency = <49152000>;
-};
-
-&gmac0 {
- phy-handle = <&phy0>;
- phy-mode = "rgmii-id";
- status = "okay";
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "snps,dwmac-mdio";
-
- phy0: ethernet-phy@0 {
- reg = <0>;
- };
- };
-};
-
&gmac1 {
phy-handle = <&phy1>;
phy-mode = "rgmii-id";
@@ -157,488 +37,10 @@ phy1: ethernet-phy@1 {
};
};
-&i2c0 {
- clock-frequency = <100000>;
- i2c-sda-hold-time-ns = <300>;
- i2c-sda-falling-time-ns = <510>;
- i2c-scl-falling-time-ns = <510>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins>;
- status = "okay";
-};
-
-&i2c2 {
- clock-frequency = <100000>;
- i2c-sda-hold-time-ns = <300>;
- i2c-sda-falling-time-ns = <510>;
- i2c-scl-falling-time-ns = <510>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins>;
- status = "okay";
-};
-
-&i2c5 {
- clock-frequency = <100000>;
- i2c-sda-hold-time-ns = <300>;
- i2c-sda-falling-time-ns = <510>;
- i2c-scl-falling-time-ns = <510>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c5_pins>;
- status = "okay";
-
- axp15060: pmic@36 {
- compatible = "x-powers,axp15060";
- reg = <0x36>;
- interrupts = <0>;
- interrupt-controller;
- #interrupt-cells = <1>;
-
- regulators {
- vcc_3v3: dcdc1 {
- regulator-boot-on;
- regulator-always-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vcc_3v3";
- };
-
- vdd_cpu: dcdc2 {
- regulator-always-on;
- regulator-min-microvolt = <500000>;
- regulator-max-microvolt = <1540000>;
- regulator-name = "vdd-cpu";
- };
-
- emmc_vdd: aldo4 {
- regulator-boot-on;
- regulator-always-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-name = "emmc_vdd";
- };
- };
- };
-};
-
-&i2c6 {
- clock-frequency = <100000>;
- i2c-sda-hold-time-ns = <300>;
- i2c-sda-falling-time-ns = <510>;
- i2c-scl-falling-time-ns = <510>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c6_pins>;
- status = "okay";
-};
-
-&i2srx {
- pinctrl-names = "default";
- pinctrl-0 = <&i2srx_pins>;
- status = "okay";
-};
-
-&i2stx0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mclk_ext_pins>;
- status = "okay";
-};
-
-&i2stx1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2stx1_pins>;
- status = "okay";
-};
-
&mmc0 {
- max-frequency = <100000000>;
- assigned-clocks = <&syscrg JH7110_SYSCLK_SDIO0_SDCARD>;
- assigned-clock-rates = <50000000>;
- bus-width = <8>;
- cap-mmc-highspeed;
- mmc-ddr-1_8v;
- mmc-hs200-1_8v;
non-removable;
- cap-mmc-hw-reset;
- post-power-on-delay-ms = <200>;
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins>;
- vmmc-supply = <&vcc_3v3>;
- vqmmc-supply = <&emmc_vdd>;
- status = "okay";
};
&mmc1 {
- max-frequency = <100000000>;
- assigned-clocks = <&syscrg JH7110_SYSCLK_SDIO1_SDCARD>;
- assigned-clock-rates = <50000000>;
- bus-width = <4>;
- no-sdio;
- no-mmc;
broken-cd;
- cap-sd-highspeed;
- post-power-on-delay-ms = <200>;
- pinctrl-names = "default";
- pinctrl-0 = <&mmc1_pins>;
- status = "okay";
-};
-
-&pwmdac {
- pinctrl-names = "default";
- pinctrl-0 = <&pwmdac_pins>;
- status = "okay";
-};
-
-&qspi {
- #address-cells = <1>;
- #size-cells = <0>;
- status = "okay";
-
- nor_flash: flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- cdns,read-delay = <5>;
- spi-max-frequency = <12000000>;
- cdns,tshsl-ns = <1>;
- cdns,tsd2d-ns = <1>;
- cdns,tchsh-ns = <1>;
- cdns,tslch-ns = <1>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- spl@0 {
- reg = <0x0 0x80000>;
- };
- uboot-env@...00 {
- reg = <0xf0000 0x10000>;
- };
- uboot@...000 {
- reg = <0x100000 0x400000>;
- };
- reserved-data@...000 {
- reg = <0x600000 0xa00000>;
- };
- };
- };
-};
-
-&spi0 {
- pinctrl-names = "default";
- pinctrl-0 = <&spi0_pins>;
- status = "okay";
-
- spi_dev0: spi@0 {
- compatible = "rohm,dh2228fv";
- reg = <0>;
- spi-max-frequency = <10000000>;
- };
-};
-
-&sysgpio {
- i2c0_pins: i2c0-0 {
- i2c-pins {
- pinmux = <GPIOMUX(57, GPOUT_LOW,
- GPOEN_SYS_I2C0_CLK,
- GPI_SYS_I2C0_CLK)>,
- <GPIOMUX(58, GPOUT_LOW,
- GPOEN_SYS_I2C0_DATA,
- GPI_SYS_I2C0_DATA)>;
- bias-disable; /* external pull-up */
- input-enable;
- input-schmitt-enable;
- };
- };
-
- i2c2_pins: i2c2-0 {
- i2c-pins {
- pinmux = <GPIOMUX(3, GPOUT_LOW,
- GPOEN_SYS_I2C2_CLK,
- GPI_SYS_I2C2_CLK)>,
- <GPIOMUX(2, GPOUT_LOW,
- GPOEN_SYS_I2C2_DATA,
- GPI_SYS_I2C2_DATA)>;
- bias-disable; /* external pull-up */
- input-enable;
- input-schmitt-enable;
- };
- };
-
- i2c5_pins: i2c5-0 {
- i2c-pins {
- pinmux = <GPIOMUX(19, GPOUT_LOW,
- GPOEN_SYS_I2C5_CLK,
- GPI_SYS_I2C5_CLK)>,
- <GPIOMUX(20, GPOUT_LOW,
- GPOEN_SYS_I2C5_DATA,
- GPI_SYS_I2C5_DATA)>;
- bias-disable; /* external pull-up */
- input-enable;
- input-schmitt-enable;
- };
- };
-
- i2c6_pins: i2c6-0 {
- i2c-pins {
- pinmux = <GPIOMUX(16, GPOUT_LOW,
- GPOEN_SYS_I2C6_CLK,
- GPI_SYS_I2C6_CLK)>,
- <GPIOMUX(17, GPOUT_LOW,
- GPOEN_SYS_I2C6_DATA,
- GPI_SYS_I2C6_DATA)>;
- bias-disable; /* external pull-up */
- input-enable;
- input-schmitt-enable;
- };
- };
-
- i2srx_pins: i2srx-0 {
- clk-sd-pins {
- pinmux = <GPIOMUX(38, GPOUT_LOW,
- GPOEN_DISABLE,
- GPI_SYS_I2SRX_BCLK)>,
- <GPIOMUX(63, GPOUT_LOW,
- GPOEN_DISABLE,
- GPI_SYS_I2SRX_LRCK)>,
- <GPIOMUX(38, GPOUT_LOW,
- GPOEN_DISABLE,
- GPI_SYS_I2STX1_BCLK)>,
- <GPIOMUX(63, GPOUT_LOW,
- GPOEN_DISABLE,
- GPI_SYS_I2STX1_LRCK)>,
- <GPIOMUX(61, GPOUT_LOW,
- GPOEN_DISABLE,
- GPI_SYS_I2SRX_SDIN0)>;
- input-enable;
- };
- };
-
- i2stx1_pins: i2stx1-0 {
- sd-pins {
- pinmux = <GPIOMUX(44, GPOUT_SYS_I2STX1_SDO0,
- GPOEN_ENABLE,
- GPI_NONE)>;
- bias-disable;
- input-disable;
- };
- };
-
- mclk_ext_pins: mclk-ext-0 {
- mclk-ext-pins {
- pinmux = <GPIOMUX(4, GPOUT_LOW,
- GPOEN_DISABLE,
- GPI_SYS_MCLK_EXT)>;
- input-enable;
- };
- };
-
- mmc0_pins: mmc0-0 {
- rst-pins {
- pinmux = <GPIOMUX(62, GPOUT_SYS_SDIO0_RST,
- GPOEN_ENABLE,
- GPI_NONE)>;
- bias-pull-up;
- drive-strength = <12>;
- input-disable;
- input-schmitt-disable;
- slew-rate = <0>;
- };
-
- mmc-pins {
- pinmux = <PINMUX(64, 0)>,
- <PINMUX(65, 0)>,
- <PINMUX(66, 0)>,
- <PINMUX(67, 0)>,
- <PINMUX(68, 0)>,
- <PINMUX(69, 0)>,
- <PINMUX(70, 0)>,
- <PINMUX(71, 0)>,
- <PINMUX(72, 0)>,
- <PINMUX(73, 0)>;
- bias-pull-up;
- drive-strength = <12>;
- input-enable;
- };
- };
-
- mmc1_pins: mmc1-0 {
- clk-pins {
- pinmux = <GPIOMUX(10, GPOUT_SYS_SDIO1_CLK,
- GPOEN_ENABLE,
- GPI_NONE)>;
- bias-pull-up;
- drive-strength = <12>;
- input-disable;
- input-schmitt-disable;
- slew-rate = <0>;
- };
-
- mmc-pins {
- pinmux = <GPIOMUX(9, GPOUT_SYS_SDIO1_CMD,
- GPOEN_SYS_SDIO1_CMD,
- GPI_SYS_SDIO1_CMD)>,
- <GPIOMUX(11, GPOUT_SYS_SDIO1_DATA0,
- GPOEN_SYS_SDIO1_DATA0,
- GPI_SYS_SDIO1_DATA0)>,
- <GPIOMUX(12, GPOUT_SYS_SDIO1_DATA1,
- GPOEN_SYS_SDIO1_DATA1,
- GPI_SYS_SDIO1_DATA1)>,
- <GPIOMUX(7, GPOUT_SYS_SDIO1_DATA2,
- GPOEN_SYS_SDIO1_DATA2,
- GPI_SYS_SDIO1_DATA2)>,
- <GPIOMUX(8, GPOUT_SYS_SDIO1_DATA3,
- GPOEN_SYS_SDIO1_DATA3,
- GPI_SYS_SDIO1_DATA3)>;
- bias-pull-up;
- drive-strength = <12>;
- input-enable;
- input-schmitt-enable;
- slew-rate = <0>;
- };
- };
-
- pwmdac_pins: pwmdac-0 {
- pwmdac-pins {
- pinmux = <GPIOMUX(33, GPOUT_SYS_PWMDAC_LEFT,
- GPOEN_ENABLE,
- GPI_NONE)>,
- <GPIOMUX(34, GPOUT_SYS_PWMDAC_RIGHT,
- GPOEN_ENABLE,
- GPI_NONE)>;
- bias-disable;
- drive-strength = <2>;
- input-disable;
- input-schmitt-disable;
- slew-rate = <0>;
- };
- };
-
- spi0_pins: spi0-0 {
- mosi-pins {
- pinmux = <GPIOMUX(52, GPOUT_SYS_SPI0_TXD,
- GPOEN_ENABLE,
- GPI_NONE)>;
- bias-disable;
- input-disable;
- input-schmitt-disable;
- };
-
- miso-pins {
- pinmux = <GPIOMUX(53, GPOUT_LOW,
- GPOEN_DISABLE,
- GPI_SYS_SPI0_RXD)>;
- bias-pull-up;
- input-enable;
- input-schmitt-enable;
- };
-
- sck-pins {
- pinmux = <GPIOMUX(48, GPOUT_SYS_SPI0_CLK,
- GPOEN_ENABLE,
- GPI_SYS_SPI0_CLK)>;
- bias-disable;
- input-disable;
- input-schmitt-disable;
- };
-
- ss-pins {
- pinmux = <GPIOMUX(49, GPOUT_SYS_SPI0_FSS,
- GPOEN_ENABLE,
- GPI_SYS_SPI0_FSS)>;
- bias-disable;
- input-disable;
- input-schmitt-disable;
- };
- };
-
- tdm_pins: tdm-0 {
- tx-pins {
- pinmux = <GPIOMUX(44, GPOUT_SYS_TDM_TXD,
- GPOEN_ENABLE,
- GPI_NONE)>;
- bias-pull-up;
- drive-strength = <2>;
- input-disable;
- input-schmitt-disable;
- slew-rate = <0>;
- };
-
- rx-pins {
- pinmux = <GPIOMUX(61, GPOUT_HIGH,
- GPOEN_DISABLE,
- GPI_SYS_TDM_RXD)>;
- input-enable;
- };
-
- sync-pins {
- pinmux = <GPIOMUX(63, GPOUT_HIGH,
- GPOEN_DISABLE,
- GPI_SYS_TDM_SYNC)>;
- input-enable;
- };
-
- pcmclk-pins {
- pinmux = <GPIOMUX(38, GPOUT_HIGH,
- GPOEN_DISABLE,
- GPI_SYS_TDM_CLK)>;
- input-enable;
- };
- };
-
- uart0_pins: uart0-0 {
- tx-pins {
- pinmux = <GPIOMUX(5, GPOUT_SYS_UART0_TX,
- GPOEN_ENABLE,
- GPI_NONE)>;
- bias-disable;
- drive-strength = <12>;
- input-disable;
- input-schmitt-disable;
- slew-rate = <0>;
- };
-
- rx-pins {
- pinmux = <GPIOMUX(6, GPOUT_LOW,
- GPOEN_DISABLE,
- GPI_SYS_UART0_RX)>;
- bias-disable; /* external pull-up */
- drive-strength = <2>;
- input-enable;
- input-schmitt-enable;
- slew-rate = <0>;
- };
- };
-};
-
-&tdm {
- pinctrl-names = "default";
- pinctrl-0 = <&tdm_pins>;
- status = "okay";
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins>;
- status = "okay";
-};
-
-&usb0 {
- dr_mode = "peripheral";
- status = "okay";
-};
-
-&U74_1 {
- cpu-supply = <&vdd_cpu>;
-};
-
-&U74_2 {
- cpu-supply = <&vdd_cpu>;
-};
-
-&U74_3 {
- cpu-supply = <&vdd_cpu>;
-};
-
-&U74_4 {
- cpu-supply = <&vdd_cpu>;
};
diff --git a/arch/riscv/boot/dts/starfive/jh7110-visionfive2-mars-common.dtsi b/arch/riscv/boot/dts/starfive/jh7110-visionfive2-mars-common.dtsi
new file mode 100644
index 000000000000..72f527a9e75e
--- /dev/null
+++ b/arch/riscv/boot/dts/starfive/jh7110-visionfive2-mars-common.dtsi
@@ -0,0 +1,617 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2022 StarFive Technology Co., Ltd.
+ * Copyright (C) 2022 Emil Renner Berthing <kernel@...il.dk>
+ */
+
+/dts-v1/;
+#include "jh7110.dtsi"
+#include "jh7110-pinfunc.h"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ aliases {
+ ethernet0 = &gmac0;
+ i2c0 = &i2c0;
+ i2c2 = &i2c2;
+ i2c5 = &i2c5;
+ i2c6 = &i2c6;
+ mmc0 = &mmc0;
+ mmc1 = &mmc1;
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@...00000 {
+ device_type = "memory";
+ reg = <0x0 0x40000000 0x1 0x0>;
+ };
+
+ gpio-restart {
+ compatible = "gpio-restart";
+ gpios = <&sysgpio 35 GPIO_ACTIVE_HIGH>;
+ priority = <224>;
+ };
+
+ pwmdac_codec: audio-codec {
+ compatible = "linux,spdif-dit";
+ #sound-dai-cells = <0>;
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "StarFive-PWMDAC-Sound-Card";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ simple-audio-card,dai-link@0 {
+ reg = <0>;
+ format = "left_j";
+ bitclock-master = <&sndcpu0>;
+ frame-master = <&sndcpu0>;
+
+ sndcpu0: cpu {
+ sound-dai = <&pwmdac>;
+ };
+
+ codec {
+ sound-dai = <&pwmdac_codec>;
+ };
+ };
+ };
+};
+
+&cpus {
+ timebase-frequency = <4000000>;
+};
+
+&dvp_clk {
+ clock-frequency = <74250000>;
+};
+
+&gmac0_rgmii_rxin {
+ clock-frequency = <125000000>;
+};
+
+&gmac0_rmii_refin {
+ clock-frequency = <50000000>;
+};
+
+&hdmitx0_pixelclk {
+ clock-frequency = <297000000>;
+};
+
+&i2srx_bclk_ext {
+ clock-frequency = <12288000>;
+};
+
+&i2srx_lrck_ext {
+ clock-frequency = <192000>;
+};
+
+&i2stx_bclk_ext {
+ clock-frequency = <12288000>;
+};
+
+&i2stx_lrck_ext {
+ clock-frequency = <192000>;
+};
+
+&mclk_ext {
+ clock-frequency = <12288000>;
+};
+
+&osc {
+ clock-frequency = <24000000>;
+};
+
+&rtc_osc {
+ clock-frequency = <32768>;
+};
+
+&tdm_ext {
+ clock-frequency = <49152000>;
+};
+
+&gmac0 {
+ phy-handle = <&phy0>;
+ phy-mode = "rgmii-id";
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+ };
+};
+
+&i2c0 {
+ clock-frequency = <100000>;
+ i2c-sda-hold-time-ns = <300>;
+ i2c-sda-falling-time-ns = <510>;
+ i2c-scl-falling-time-ns = <510>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+ status = "okay";
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ i2c-sda-hold-time-ns = <300>;
+ i2c-sda-falling-time-ns = <510>;
+ i2c-scl-falling-time-ns = <510>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
+ status = "okay";
+};
+
+&i2c5 {
+ clock-frequency = <100000>;
+ i2c-sda-hold-time-ns = <300>;
+ i2c-sda-falling-time-ns = <510>;
+ i2c-scl-falling-time-ns = <510>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c5_pins>;
+ status = "okay";
+
+ axp15060: pmic@36 {
+ compatible = "x-powers,axp15060";
+ reg = <0x36>;
+ interrupts = <0>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ regulators {
+ vcc_3v3: dcdc1 {
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc_3v3";
+ };
+
+ vdd_cpu: dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1540000>;
+ regulator-name = "vdd-cpu";
+ };
+
+ emmc_vdd: aldo4 {
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "emmc_vdd";
+ };
+ };
+ };
+};
+
+&i2c6 {
+ clock-frequency = <100000>;
+ i2c-sda-hold-time-ns = <300>;
+ i2c-sda-falling-time-ns = <510>;
+ i2c-scl-falling-time-ns = <510>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c6_pins>;
+ status = "okay";
+};
+
+&i2srx {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2srx_pins>;
+ status = "okay";
+};
+
+&i2stx0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mclk_ext_pins>;
+ status = "okay";
+};
+
+&i2stx1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2stx1_pins>;
+ status = "okay";
+};
+
+&mmc0 {
+ max-frequency = <100000000>;
+ assigned-clocks = <&syscrg JH7110_SYSCLK_SDIO0_SDCARD>;
+ assigned-clock-rates = <50000000>;
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+ cap-mmc-hw-reset;
+ post-power-on-delay-ms = <200>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins>;
+ vmmc-supply = <&vcc_3v3>;
+ vqmmc-supply = <&emmc_vdd>;
+ status = "okay";
+};
+
+&mmc1 {
+ max-frequency = <100000000>;
+ assigned-clocks = <&syscrg JH7110_SYSCLK_SDIO1_SDCARD>;
+ assigned-clock-rates = <50000000>;
+ bus-width = <4>;
+ no-sdio;
+ no-mmc;
+ cap-sd-highspeed;
+ post-power-on-delay-ms = <200>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ status = "okay";
+};
+
+&pwmdac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwmdac_pins>;
+ status = "okay";
+};
+
+&qspi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ nor_flash: flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ cdns,read-delay = <5>;
+ spi-max-frequency = <12000000>;
+ cdns,tshsl-ns = <1>;
+ cdns,tsd2d-ns = <1>;
+ cdns,tchsh-ns = <1>;
+ cdns,tslch-ns = <1>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ spl@0 {
+ reg = <0x0 0x80000>;
+ };
+ uboot-env@...00 {
+ reg = <0xf0000 0x10000>;
+ };
+ uboot@...000 {
+ reg = <0x100000 0x400000>;
+ };
+ reserved-data@...000 {
+ reg = <0x600000 0xa00000>;
+ };
+ };
+ };
+};
+
+&spi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins>;
+ status = "okay";
+
+ spi_dev0: spi@0 {
+ compatible = "rohm,dh2228fv";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+ };
+};
+
+&sysgpio {
+ i2c0_pins: i2c0-0 {
+ i2c-pins {
+ pinmux = <GPIOMUX(57, GPOUT_LOW,
+ GPOEN_SYS_I2C0_CLK,
+ GPI_SYS_I2C0_CLK)>,
+ <GPIOMUX(58, GPOUT_LOW,
+ GPOEN_SYS_I2C0_DATA,
+ GPI_SYS_I2C0_DATA)>;
+ bias-disable; /* external pull-up */
+ input-enable;
+ input-schmitt-enable;
+ };
+ };
+
+ i2c2_pins: i2c2-0 {
+ i2c-pins {
+ pinmux = <GPIOMUX(3, GPOUT_LOW,
+ GPOEN_SYS_I2C2_CLK,
+ GPI_SYS_I2C2_CLK)>,
+ <GPIOMUX(2, GPOUT_LOW,
+ GPOEN_SYS_I2C2_DATA,
+ GPI_SYS_I2C2_DATA)>;
+ bias-disable; /* external pull-up */
+ input-enable;
+ input-schmitt-enable;
+ };
+ };
+
+ i2c5_pins: i2c5-0 {
+ i2c-pins {
+ pinmux = <GPIOMUX(19, GPOUT_LOW,
+ GPOEN_SYS_I2C5_CLK,
+ GPI_SYS_I2C5_CLK)>,
+ <GPIOMUX(20, GPOUT_LOW,
+ GPOEN_SYS_I2C5_DATA,
+ GPI_SYS_I2C5_DATA)>;
+ bias-disable; /* external pull-up */
+ input-enable;
+ input-schmitt-enable;
+ };
+ };
+
+ i2c6_pins: i2c6-0 {
+ i2c-pins {
+ pinmux = <GPIOMUX(16, GPOUT_LOW,
+ GPOEN_SYS_I2C6_CLK,
+ GPI_SYS_I2C6_CLK)>,
+ <GPIOMUX(17, GPOUT_LOW,
+ GPOEN_SYS_I2C6_DATA,
+ GPI_SYS_I2C6_DATA)>;
+ bias-disable; /* external pull-up */
+ input-enable;
+ input-schmitt-enable;
+ };
+ };
+
+ i2srx_pins: i2srx-0 {
+ clk-sd-pins {
+ pinmux = <GPIOMUX(38, GPOUT_LOW,
+ GPOEN_DISABLE,
+ GPI_SYS_I2SRX_BCLK)>,
+ <GPIOMUX(63, GPOUT_LOW,
+ GPOEN_DISABLE,
+ GPI_SYS_I2SRX_LRCK)>,
+ <GPIOMUX(38, GPOUT_LOW,
+ GPOEN_DISABLE,
+ GPI_SYS_I2STX1_BCLK)>,
+ <GPIOMUX(63, GPOUT_LOW,
+ GPOEN_DISABLE,
+ GPI_SYS_I2STX1_LRCK)>,
+ <GPIOMUX(61, GPOUT_LOW,
+ GPOEN_DISABLE,
+ GPI_SYS_I2SRX_SDIN0)>;
+ input-enable;
+ };
+ };
+
+ i2stx1_pins: i2stx1-0 {
+ sd-pins {
+ pinmux = <GPIOMUX(44, GPOUT_SYS_I2STX1_SDO0,
+ GPOEN_ENABLE,
+ GPI_NONE)>;
+ bias-disable;
+ input-disable;
+ };
+ };
+
+ mclk_ext_pins: mclk-ext-0 {
+ mclk-ext-pins {
+ pinmux = <GPIOMUX(4, GPOUT_LOW,
+ GPOEN_DISABLE,
+ GPI_SYS_MCLK_EXT)>;
+ input-enable;
+ };
+ };
+
+ mmc0_pins: mmc0-0 {
+ rst-pins {
+ pinmux = <GPIOMUX(62, GPOUT_SYS_SDIO0_RST,
+ GPOEN_ENABLE,
+ GPI_NONE)>;
+ bias-pull-up;
+ drive-strength = <12>;
+ input-disable;
+ input-schmitt-disable;
+ slew-rate = <0>;
+ };
+
+ mmc-pins {
+ pinmux = <PINMUX(64, 0)>,
+ <PINMUX(65, 0)>,
+ <PINMUX(66, 0)>,
+ <PINMUX(67, 0)>,
+ <PINMUX(68, 0)>,
+ <PINMUX(69, 0)>,
+ <PINMUX(70, 0)>,
+ <PINMUX(71, 0)>,
+ <PINMUX(72, 0)>,
+ <PINMUX(73, 0)>;
+ bias-pull-up;
+ drive-strength = <12>;
+ input-enable;
+ };
+ };
+
+ mmc1_pins: mmc1-0 {
+ clk-pins {
+ pinmux = <GPIOMUX(10, GPOUT_SYS_SDIO1_CLK,
+ GPOEN_ENABLE,
+ GPI_NONE)>;
+ bias-pull-up;
+ drive-strength = <12>;
+ input-disable;
+ input-schmitt-disable;
+ slew-rate = <0>;
+ };
+
+ mmc-pins {
+ pinmux = <GPIOMUX(9, GPOUT_SYS_SDIO1_CMD,
+ GPOEN_SYS_SDIO1_CMD,
+ GPI_SYS_SDIO1_CMD)>,
+ <GPIOMUX(11, GPOUT_SYS_SDIO1_DATA0,
+ GPOEN_SYS_SDIO1_DATA0,
+ GPI_SYS_SDIO1_DATA0)>,
+ <GPIOMUX(12, GPOUT_SYS_SDIO1_DATA1,
+ GPOEN_SYS_SDIO1_DATA1,
+ GPI_SYS_SDIO1_DATA1)>,
+ <GPIOMUX(7, GPOUT_SYS_SDIO1_DATA2,
+ GPOEN_SYS_SDIO1_DATA2,
+ GPI_SYS_SDIO1_DATA2)>,
+ <GPIOMUX(8, GPOUT_SYS_SDIO1_DATA3,
+ GPOEN_SYS_SDIO1_DATA3,
+ GPI_SYS_SDIO1_DATA3)>;
+ bias-pull-up;
+ drive-strength = <12>;
+ input-enable;
+ input-schmitt-enable;
+ slew-rate = <0>;
+ };
+ };
+
+ pwmdac_pins: pwmdac-0 {
+ pwmdac-pins {
+ pinmux = <GPIOMUX(33, GPOUT_SYS_PWMDAC_LEFT,
+ GPOEN_ENABLE,
+ GPI_NONE)>,
+ <GPIOMUX(34, GPOUT_SYS_PWMDAC_RIGHT,
+ GPOEN_ENABLE,
+ GPI_NONE)>;
+ bias-disable;
+ drive-strength = <2>;
+ input-disable;
+ input-schmitt-disable;
+ slew-rate = <0>;
+ };
+ };
+
+ spi0_pins: spi0-0 {
+ mosi-pins {
+ pinmux = <GPIOMUX(52, GPOUT_SYS_SPI0_TXD,
+ GPOEN_ENABLE,
+ GPI_NONE)>;
+ bias-disable;
+ input-disable;
+ input-schmitt-disable;
+ };
+
+ miso-pins {
+ pinmux = <GPIOMUX(53, GPOUT_LOW,
+ GPOEN_DISABLE,
+ GPI_SYS_SPI0_RXD)>;
+ bias-pull-up;
+ input-enable;
+ input-schmitt-enable;
+ };
+
+ sck-pins {
+ pinmux = <GPIOMUX(48, GPOUT_SYS_SPI0_CLK,
+ GPOEN_ENABLE,
+ GPI_SYS_SPI0_CLK)>;
+ bias-disable;
+ input-disable;
+ input-schmitt-disable;
+ };
+
+ ss-pins {
+ pinmux = <GPIOMUX(49, GPOUT_SYS_SPI0_FSS,
+ GPOEN_ENABLE,
+ GPI_SYS_SPI0_FSS)>;
+ bias-disable;
+ input-disable;
+ input-schmitt-disable;
+ };
+ };
+
+ tdm_pins: tdm-0 {
+ tx-pins {
+ pinmux = <GPIOMUX(44, GPOUT_SYS_TDM_TXD,
+ GPOEN_ENABLE,
+ GPI_NONE)>;
+ bias-pull-up;
+ drive-strength = <2>;
+ input-disable;
+ input-schmitt-disable;
+ slew-rate = <0>;
+ };
+
+ rx-pins {
+ pinmux = <GPIOMUX(61, GPOUT_HIGH,
+ GPOEN_DISABLE,
+ GPI_SYS_TDM_RXD)>;
+ input-enable;
+ };
+
+ sync-pins {
+ pinmux = <GPIOMUX(63, GPOUT_HIGH,
+ GPOEN_DISABLE,
+ GPI_SYS_TDM_SYNC)>;
+ input-enable;
+ };
+
+ pcmclk-pins {
+ pinmux = <GPIOMUX(38, GPOUT_HIGH,
+ GPOEN_DISABLE,
+ GPI_SYS_TDM_CLK)>;
+ input-enable;
+ };
+ };
+
+ uart0_pins: uart0-0 {
+ tx-pins {
+ pinmux = <GPIOMUX(5, GPOUT_SYS_UART0_TX,
+ GPOEN_ENABLE,
+ GPI_NONE)>;
+ bias-disable;
+ drive-strength = <12>;
+ input-disable;
+ input-schmitt-disable;
+ slew-rate = <0>;
+ };
+
+ rx-pins {
+ pinmux = <GPIOMUX(6, GPOUT_LOW,
+ GPOEN_DISABLE,
+ GPI_SYS_UART0_RX)>;
+ bias-disable; /* external pull-up */
+ drive-strength = <2>;
+ input-enable;
+ input-schmitt-enable;
+ slew-rate = <0>;
+ };
+ };
+};
+
+&tdm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&tdm_pins>;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+ status = "okay";
+};
+
+&usb0 {
+ dr_mode = "peripheral";
+ status = "okay";
+};
+
+&U74_1 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&U74_2 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&U74_3 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&U74_4 {
+ cpu-supply = <&vdd_cpu>;
+};
--
2.43.0
Powered by blists - more mailing lists