| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20240131142318.GA1091307-robh@kernel.org>
Date: Wed, 31 Jan 2024 08:23:18 -0600
From: Rob Herring <robh@...nel.org>
To: Dragan Cvetic <dragan.cvetic@....com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Derek Kiernan <derek.kiernan@....com>,
Jonathan Corbet <corbet@....net>,
Michal Simek <michal.simek@....com>,
"Erim, Salih" <salih.erim@....com>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" <devicetree@...r.kernel.org>,
open list <linux-kernel@...r.kernel.org>,
"open list:DOCUMENTATION" <linux-doc@...r.kernel.org>,
"moderated list:ARM/ZYNQ ARCHITECTURE" <linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH v4] dt-bindings: misc: xlnx,sd-fec: convert bindings to
yaml
On Tue, Jan 30, 2024 at 04:12:58PM +0000, Dragan Cvetic wrote:
> Convert AMD (Xilinx) sd-fec bindings to yaml format, so it can validate
> dt-entries as well as any future additions to yaml.
> Change in clocks is due to IP is itself configurable and
> only the first two clocks are in all combinations. The last
> 6 clocks can be present in some of them. It means order is
> not really fixed and any combination is possible.
> Interrupt may or may not be present.
> The documentation for sd-fec bindings is now YAML, so update the
> MAINTAINERS file.
> Update the link to the new yaml file in xilinx_sdfec.rst.
>
> Signed-off-by: Dragan Cvetic <dragan.cvetic@....com>
> ---
> Changes in v2:
> ---
> Drop clocks description.
> Use "contains:" with enum for optional clock-names and update
> comment explaining diference from the original DT binding file.
> Remove trailing full stops.
> Add more details in sdfec-code description.
> Set sdfec-code to "string" not "string-array"
> ---
> Changes in v3:
> Fix a mistake in example, set interrupt type to 0.
> ---
> Changes in v4:
> Set interrupt type to high level sensitive.
> Remove '|' from descriptions, no need to preserve format.
> Remove not needed empty line.
> ---
> .../devicetree/bindings/misc/xlnx,sd-fec.txt | 58 --------
> .../devicetree/bindings/misc/xlnx,sd-fec.yaml | 137 ++++++++++++++++++
> Documentation/misc-devices/xilinx_sdfec.rst | 2 +-
> MAINTAINERS | 2 +-
> 4 files changed, 139 insertions(+), 60 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/misc/xlnx,sd-fec.txt
> create mode 100644 Documentation/devicetree/bindings/misc/xlnx,sd-fec.yaml
>
> diff --git a/Documentation/devicetree/bindings/misc/xlnx,sd-fec.txt b/Documentation/devicetree/bindings/misc/xlnx,sd-fec.txt
> deleted file mode 100644
> index e3289634fa30..000000000000
> --- a/Documentation/devicetree/bindings/misc/xlnx,sd-fec.txt
> +++ /dev/null
> @@ -1,58 +0,0 @@
> -* Xilinx SDFEC(16nm) IP *
> -
> -The Soft Decision Forward Error Correction (SDFEC) Engine is a Hard IP block
> -which provides high-throughput LDPC and Turbo Code implementations.
> -The LDPC decode & encode functionality is capable of covering a range of
> -customer specified Quasi-cyclic (QC) codes. The Turbo decode functionality
> -principally covers codes used by LTE. The FEC Engine offers significant
> -power and area savings versus implementations done in the FPGA fabric.
> -
> -
> -Required properties:
> -- compatible: Must be "xlnx,sd-fec-1.1"
> -- clock-names : List of input clock names from the following:
> - - "core_clk", Main processing clock for processing core (required)
> - - "s_axi_aclk", AXI4-Lite memory-mapped slave interface clock (required)
> - - "s_axis_din_aclk", DIN AXI4-Stream Slave interface clock (optional)
> - - "s_axis_din_words-aclk", DIN_WORDS AXI4-Stream Slave interface clock (optional)
> - - "s_axis_ctrl_aclk", Control input AXI4-Stream Slave interface clock (optional)
> - - "m_axis_dout_aclk", DOUT AXI4-Stream Master interface clock (optional)
> - - "m_axis_dout_words_aclk", DOUT_WORDS AXI4-Stream Master interface clock (optional)
> - - "m_axis_status_aclk", Status output AXI4-Stream Master interface clock (optional)
> -- clocks : Clock phandles (see clock_bindings.txt for details).
> -- reg: Should contain Xilinx SDFEC 16nm Hardened IP block registers
> - location and length.
> -- xlnx,sdfec-code : Should contain "ldpc" or "turbo" to describe the codes
> - being used.
> -- xlnx,sdfec-din-words : A value 0 indicates that the DIN_WORDS interface is
> - driven with a fixed value and is not present on the device, a value of 1
> - configures the DIN_WORDS to be block based, while a value of 2 configures the
> - DIN_WORDS input to be supplied for each AXI transaction.
> -- xlnx,sdfec-din-width : Configures the DIN AXI stream where a value of 1
> - configures a width of "1x128b", 2 a width of "2x128b" and 4 configures a width
> - of "4x128b".
> -- xlnx,sdfec-dout-words : A value 0 indicates that the DOUT_WORDS interface is
> - driven with a fixed value and is not present on the device, a value of 1
> - configures the DOUT_WORDS to be block based, while a value of 2 configures the
> - DOUT_WORDS input to be supplied for each AXI transaction.
> -- xlnx,sdfec-dout-width : Configures the DOUT AXI stream where a value of 1
> - configures a width of "1x128b", 2 a width of "2x128b" and 4 configures a width
> - of "4x128b".
> -Optional properties:
> -- interrupts: should contain SDFEC interrupt number
> -
> -Example
> ----------------------------------------
> - sd_fec_0: sd-fec@...40000 {
> - compatible = "xlnx,sd-fec-1.1";
> - clock-names = "core_clk","s_axi_aclk","s_axis_ctrl_aclk","s_axis_din_aclk","m_axis_status_aclk","m_axis_dout_aclk";
> - clocks = <&misc_clk_2>,<&misc_clk_0>,<&misc_clk_1>,<&misc_clk_1>,<&misc_clk_1>, <&misc_clk_1>;
> - reg = <0x0 0xa0040000 0x0 0x40000>;
> - interrupt-parent = <&axi_intc>;
> - interrupts = <1 0>;
> - xlnx,sdfec-code = "ldpc";
> - xlnx,sdfec-din-words = <0>;
> - xlnx,sdfec-din-width = <2>;
> - xlnx,sdfec-dout-words = <0>;
> - xlnx,sdfec-dout-width = <1>;
> - };
> diff --git a/Documentation/devicetree/bindings/misc/xlnx,sd-fec.yaml b/Documentation/devicetree/bindings/misc/xlnx,sd-fec.yaml
> new file mode 100644
> index 000000000000..7be8439861a9
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/misc/xlnx,sd-fec.yaml
> @@ -0,0 +1,137 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/misc/xlnx,sd-fec.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Xilinx SDFEC(16nm) IP
> +
> +maintainers:
> + - Cvetic, Dragan <dragan.cvetic@....com>
> + - Erim, Salih <salih.erim@....com>
> +
> +description:
> + The Soft Decision Forward Error Correction (SDFEC) Engine is a Hard IP block
> + which provides high-throughput LDPC and Turbo Code implementations.
> + The LDPC decode & encode functionality is capable of covering a range of
> + customer specified Quasi-cyclic (QC) codes. The Turbo decode functionality
> + principally covers codes used by LTE. The FEC Engine offers significant
> + power and area savings versus implementations done in the FPGA fabric.
> +
> +properties:
> + compatible:
> + const: xlnx,sd-fec-1.1
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + minItems: 2
> + maxItems: 8
> + additionalItems: true
> + items:
> + - description: Main processing clock for processing core
> + - description: AXI4-Lite memory-mapped slave interface clock
> + - description: Control input AXI4-Stream Slave interface clock
> + - description: DIN AXI4-Stream Slave interface clock
> + - description: Status output AXI4-Stream Master interface clock
> + - description: DOUT AXI4-Stream Master interface clock
> + - description: DIN_WORDS AXI4-Stream Slave interface clock
> + - description: DOUT_WORDS AXI4-Stream Master interface clock
> +
> + clock-names:
> + minItems: 2
> + maxItems: 8
> + additionalItems: true
> + items:
> + - const: core_clk
> + - const: s_axi_aclk
> + contains:
> + enum:
> + - s_axis_ctrl_aclk
> + - s_axis_din_aclk
> + - m_axis_status_aclk
> + - m_axis_dout_aclk
> + - s_axis_din_words_aclk
> + - m_axis_dout_words_aclk
This doesn't do what you think. It requires at least one of these clocks
be present, so then at least 3 clocks. It also allows anything else to
be present. You need:
allOf:
- minItems: 2
maxItems: 8
additionalItems: true
items:
- const: core_clk
- const: s_axi_aclk
- items:
enum:
- core_clk
- s_axi_aclk
- s_axis_ctrl_aclk
- s_axis_din_aclk
- m_axis_status_aclk
- m_axis_dout_aclk
- s_axis_din_words_aclk
- m_axis_dout_words_aclk
Powered by blists - more mailing lists