linux-kernel - Re: [PATCH 2/2 v2] pwm: Add driver for AXI PWM generator

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <e3b22194bbe8ab5827066bf473631ce85c5c65e3.camel@gmail.com>
Date: Wed, 31 Jan 2024 15:27:58 +0100
From: Nuno Sá <noname.nuno@...il.com>
To: Trevor Gamblin <tgamblin@...libre.com>, linux-pwm@...r.kernel.org
Cc: linux-kernel@...r.kernel.org, u.kleine-koenig@...gutronix.de, 
 michael.hennerich@...log.com, nuno.sa@...log.com,
 devicetree@...r.kernel.org,  robh+dt@...nel.org,
 krzysztof.kozlowski+dt@...aro.org, conor+dt@...nel.org,  Drew Fustini
 <dfustini@...libre.com>, Sergiu Cuciurean <sergiu.cuciurean@...log.com>,
 David Lechner <dlechner@...libre.com>
Subject: Re: [PATCH 2/2 v2] pwm: Add driver for AXI PWM generator

On Tue, 2024-01-23 at 17:05 -0500, Trevor Gamblin wrote:
> From: Drew Fustini <dfustini@...libre.com>
> 
> Add support for the Analog Devices AXI PWM Generator. This device is an
> FPGA-implemented peripheral used as PWM signal generator and can be
> interfaced with AXI4. The register map of this peripheral makes it
> possible to configure the period and duty cycle of the output signal.
> 
> Link: https://wiki.analog.com/resources/fpga/docs/axi_pwm_gen
> Co-developed-by: Sergiu Cuciurean <sergiu.cuciurean@...log.com>
> Signed-off-by: Sergiu Cuciurean <sergiu.cuciurean@...log.com>
> Co-developed-by: David Lechner <dlechner@...libre.com>
> Signed-off-by: David Lechner <dlechner@...libre.com>
> Signed-off-by: Drew Fustini <dfustini@...libre.com>
> Co-developed-by: Trevor Gamblin <tgamblin@...libre.com>
> Signed-off-by: Trevor Gamblin <tgamblin@...libre.com>
> 
> ---
> v2 changes:
> * Address feedback for driver and device tree in v1:
>   * Use more reasonable Kconfig approach
>   * Use common prefixes for all functions
>   * Rename axi_pwmgen struct to axi_pwmgen_ddata
>   * Change use of "pwm" to "ddata"
>   * Set and check state->polarity
>   * Multiply safely with mul_u64_u64_div_u64()
>   * Improve handling of max and zero periods
>   * Error if clk_rate_hz > NSEC_PER_SEC
>   * Add "Limitations" section at top of pwm-axi-pwmgen.c
>   * Don't disable outputs by default
>   * Remove unnecessary macros for period, duty, offset
>   * Fix axi_pwmgen_ddata alignment
>   * Don't artificially limit npwm to four
>   * Use clk_rate_exclusive_get(), balance with clk_rate_exclusive_put()
>   * Cache clk rate in axi_pwmgen_ddata
>   * Don't assign pwm->chip.base, do assign pwm->chip.atomic
> * Remove redundant calls to clk_get_rate
> * Test contents of AXI_PWMGEN_REG_CORE_MAGIC instead of
>   arbitrary AXI_PWMGEN_TEST_DATA in AXI_PWMGEN_REG_SCRATCHPAD
> * Remove redundant clk struct from axi_pwmgen_ddata
> * Add self as module author
> * Add major version check for IP core
> 
> ---
>  MAINTAINERS                  |   1 +
>  drivers/pwm/Kconfig          |  13 ++
>  drivers/pwm/Makefile         |   1 +
>  drivers/pwm/pwm-axi-pwmgen.c | 246 +++++++++++++++++++++++++++++++++++
>  4 files changed, 261 insertions(+)
>  create mode 100644 drivers/pwm/pwm-axi-pwmgen.c
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 8a4ed5545680..2baa7a0a1c8c 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -3438,6 +3438,7 @@ L:	linux-pwm@...r.kernel.org
>  S:	Supported
>  W:	https://ez.analog.com/linux-software-drivers
>  F:	Documentation/devicetree/bindings/pwm/adi,axi-pwmgen.yaml
> +F:	drivers/pwm/pwm-axi-pwmgen.c
>  
>  AXXIA I2C CONTROLLER
>  M:	Krzysztof Adamski <krzysztof.adamski@...ia.com>
> diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
> index 4b956d661755..d44b0e86adee 100644
> --- a/drivers/pwm/Kconfig
> +++ b/drivers/pwm/Kconfig
> @@ -98,6 +98,19 @@ config PWM_ATMEL_TCB
>  	  To compile this driver as a module, choose M here: the module
>  	  will be called pwm-atmel-tcb.
>  
> +config PWM_AXI_PWMGEN
> +	tristate "Analog Devices AXI PWM generator"
> +	depends on MICROBLAZE || NIOS2 || ARCH_ZYNQ || ARCH_ZYNQMP ||
> ARCH_INTEL_SOCFPGA || COMPILE_TEST
> +	select REGMAP_MMIO
> +	help
> +	  This enables support for the Analog Devices AXI PWM generator.
> +
> +	  This is a configurable PWM generator with variable pulse width and
> +	  period.
> +
> +	  To compile this driver as a module, choose M here: the module will
> be
> +	  called pwm-axi-pwmgen.
> +
>  config PWM_BCM_IPROC
>  	tristate "iProc PWM support"
>  	depends on ARCH_BCM_IPROC || COMPILE_TEST
> diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
> index c5ec9e168ee7..8322089954e9 100644
> --- a/drivers/pwm/Makefile
> +++ b/drivers/pwm/Makefile
> @@ -6,6 +6,7 @@ obj-$(CONFIG_PWM_APPLE)		+= pwm-apple.o
>  obj-$(CONFIG_PWM_ATMEL)		+= pwm-atmel.o
>  obj-$(CONFIG_PWM_ATMEL_HLCDC_PWM)	+= pwm-atmel-hlcdc.o
>  obj-$(CONFIG_PWM_ATMEL_TCB)	+= pwm-atmel-tcb.o
> +obj-$(CONFIG_PWM_AXI_PWMGEN)	+= pwm-axi-pwmgen.o
>  obj-$(CONFIG_PWM_BCM_IPROC)	+= pwm-bcm-iproc.o
>  obj-$(CONFIG_PWM_BCM_KONA)	+= pwm-bcm-kona.o
>  obj-$(CONFIG_PWM_BCM2835)	+= pwm-bcm2835.o
> diff --git a/drivers/pwm/pwm-axi-pwmgen.c b/drivers/pwm/pwm-axi-pwmgen.c
> new file mode 100644
> index 000000000000..39d2c7be0cb4
> --- /dev/null
> +++ b/drivers/pwm/pwm-axi-pwmgen.c
> @@ -0,0 +1,246 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Analog Devices AXI PWM generator
> + *
> + * Copyright 2024 Analog Devices Inc.
> + * Copyright 2024 Baylibre SAS
> + *
> + * Limitations:
> + * - The writes to registers for period and duty are shadowed until
> + *   LOAD_CONFIG is written to AXI_PWMGEN_REG_CONFIG at the end of the
> + *   current period.
> + * - Writing LOAD_CONFIG also has the effect of re-synchronizing all
> + *   enabled channels, which could cause glitching on other channels. It
> + *   is therefore expected that channels are assigned harmonic periods
> + *   and all have a single user coordinating this.
> + * - Supports normal polarity. Does not support changing polarity.
> + */
> +#include <linux/bits.h>
> +#include <linux/clk.h>
> +#include <linux/err.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/pwm.h>
> +#include <linux/regmap.h>
> +#include <linux/slab.h>
> +
> +#define AXI_PWMGEN_VERSION_MAJOR(x)	(((x) >> 16) & 0xff)
> +#define AXI_PWMGEN_VERSION_MINOR(x)	(((x) >> 8) & 0xff)
> +#define AXI_PWMGEN_VERSION_PATCH(x)	((x) & 0xff)
> +
> +#define AXI_PWMGEN_REG_CORE_VERSION	0x00

Hi Trevor,

Just realized now that you should be using the macros already defined in

<linux/fpga/adi-axi-common.h>

- Nuno Sá