[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240131145033.0b05f4c6@donnerap.manchester.arm.com>
Date: Wed, 31 Jan 2024 14:50:33 +0000
From: Andre Przywara <andre.przywara@....com>
To: Aleksandr Shubin <privatesub2@...il.com>
Cc: linux-kernel@...r.kernel.org, Uwe Kleine-König
<u.kleine-koenig@...gutronix.de>, Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>, Conor Dooley
<conor+dt@...nel.org>, Chen-Yu Tsai <wens@...e.org>, Jernej Skrabec
<jernej.skrabec@...il.com>, Samuel Holland <samuel@...lland.org>, Paul
Walmsley <paul.walmsley@...ive.com>, Palmer Dabbelt <palmer@...belt.com>,
Albert Ou <aou@...s.berkeley.edu>, Philipp Zabel <p.zabel@...gutronix.de>,
Maksim Kiselev <bigunclemax@...il.com>, Cristian Ciocaltea
<cristian.ciocaltea@...labora.com>, Marc Kleine-Budde <mkl@...gutronix.de>,
John Watts <contact@...kia.org>, Cheo Fusi <fusibrandon13@...il.com>,
linux-pwm@...r.kernel.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-sunxi@...ts.linux.dev,
linux-riscv@...ts.infradead.org
Subject: Re: [PATCH v8 3/3] riscv: dts: allwinner: d1: Add pwm node
On Wed, 31 Jan 2024 15:59:16 +0300
Aleksandr Shubin <privatesub2@...il.com> wrote:
Hi,
> D1 and T113s contain a pwm controller with 8 channels.
> This controller is supported by the sun20i-pwm driver.
>
> Add a device tree node for it.
>
> Signed-off-by: Aleksandr Shubin <privatesub2@...il.com>
Compared against the manual:
Reviewed-by: Andre Przywara <andre.przywara@....com>
Cheers,
Andre
> ---
> arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
> diff --git a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
> index 5a9d7f5a75b4..435a1e66aa6a 100644
> --- a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
> +++ b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
> @@ -145,6 +145,18 @@ uart3_pb_pins: uart3-pb-pins {
> };
> };
>
> + pwm: pwm@...0c00 {
> + compatible = "allwinner,sun20i-d1-pwm";
> + reg = <0x02000c00 0x400>;
> + clocks = <&ccu CLK_BUS_PWM>,
> + <&dcxo>,
> + <&ccu CLK_APB0>;
> + clock-names = "bus", "hosc", "apb0";
> + resets = <&ccu RST_BUS_PWM>;
> + status = "disabled";
> + #pwm-cells = <0x3>;
> + };
> +
> ccu: clock-controller@...1000 {
> compatible = "allwinner,sun20i-d1-ccu";
> reg = <0x2001000 0x1000>;
Powered by blists - more mailing lists