[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240131202519.GB2222869-robh@kernel.org>
Date: Wed, 31 Jan 2024 14:25:19 -0600
From: Rob Herring <robh@...nel.org>
To: Bjorn Andersson <quic_bjorande@...cinc.com>
Cc: Dmitry Torokhov <dmitry.torokhov@...il.com>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Benjamin Tissoires <benjamin.tissoires@...hat.com>,
Jiri Kosina <jikos@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Johan Hovold <johan+linaro@...nel.org>,
linux-arm-msm@...r.kernel.org, linux-input@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
Konrad Dybcio <konrad.dybcio@...ainline.org>,
Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>,
Daniel Thompson <daniel.thompson@...aro.org>
Subject: Re: [PATCH v3 2/2] arm64: dts: qcom: sc8280xp-x13s: Fix/enable
touchscreen
On Mon, Jan 29, 2024 at 08:47:48AM -0800, Bjorn Andersson wrote:
> The touchscreen present on some SKUs of Lenovo Thinkpad X13s is never
> detected by Linux. Power is applied and the device is brought out of
> reset using the pinconfig in DeviceTree, but the read-test in
> __i2c_hid_core_probe() fails to access the device, which result in probe
> being aborted.
>
> Some users have reported success after rebinding the device.
>
> Looking to the ACPI tables, there's a 5ms after-power and a 200ms
> after-reset delay. The power-supply is shared with other components, so
> this is active all the way through boot. The reset GPIO, on the other
> hand, is low (reset asserted) at boot, so this is first deasserted by
> the implicit application of the pinconf state.
>
> This means the time between reset deassert and __i2c_hid_core_probe() is
> significantly below the value documented in the ACPI tables.
>
> As the I2C HID binding and driver support specifying a reset gpio,
> replace the pinconf-based scheme to pull the device out of reset. Then
> specify the after-reset time.
>
> The shared power rail is currently always on, but in case this ever
> change, the after-power delay is added as well, to not violate the
> power-on to reset-deassert timing requirement.
>
> Fixes: 32c231385ed4 ("arm64: dts: qcom: sc8280xp: add Lenovo Thinkpad X13s devicetree")
> Tested-by: Daniel Thompson <daniel.thompson@...aro.org>
> Signed-off-by: Bjorn Andersson <quic_bjorande@...cinc.com>
> ---
> arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 7 +++++--
> 1 file changed, 5 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> index def3976bd5bb..33731b95ad51 100644
> --- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> @@ -620,7 +620,6 @@ &i2c4 {
>
> status = "okay";
>
> - /* FIXME: verify */
> touchscreen@10 {
> compatible = "hid-over-i2c";
Please add a real device compatible before you need the next power
sequencing property I'll reject.
> reg = <0x10>;
> @@ -630,6 +629,11 @@ touchscreen@10 {
> vdd-supply = <&vreg_misc_3p3>;
> vddl-supply = <&vreg_s10b>;
>
> + reset-gpios = <&tlmm 99 GPIO_ACTIVE_LOW>;
> +
> + post-power-on-delay-ms = <5>;
> + post-reset-deassert-delay-ms = <200>;
> +
> pinctrl-names = "default";
> pinctrl-0 = <&ts0_default>;
> };
> @@ -1450,7 +1454,6 @@ int-n-pins {
> reset-n-pins {
> pins = "gpio99";
> function = "gpio";
> - output-high;
> drive-strength = <16>;
> };
> };
>
> --
> 2.25.1
>
Powered by blists - more mailing lists