[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <cbfcaceb-37bc-4333-9e90-31d2417ed5f5@ti.com>
Date: Wed, 31 Jan 2024 14:28:27 -0600
From: Judith Mendez <jm@...com>
To: Nishanth Menon <nm@...com>
CC: Ulf Hansson <ulf.hansson@...aro.org>, Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley
<conor+dt@...nel.org>,
Adrian Hunter <adrian.hunter@...el.com>, <linux-mmc@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, Vignesh
Raghavendra <vigneshr@...com>,
Andrew Davis <afd@...com>, Udit Kumar
<u-kumar1@...com>,
Roger Quadros <rogerq@...nel.org>, <devicetree@...r.kernel.org>,
Randolph Sapp <rs@...com>
Subject: Re: [RFC PATCH 06/13] arm64: dts: ti: k3-am62a-main: Add sdhci0
instance
On 1/31/24 1:17 PM, Nishanth Menon wrote:
> On 18:37-20240130, Judith Mendez wrote:
>> From: Nitin Yadav <n-yadav@...com>
>>
>> Add sdhci0 DT node in k3-am62a-main for eMMC support. Add otap/itap
>> values according to the datasheet[0], Refer to Table 7-79.
>>
>> [0] https://www.ti.com/lit/ds/symlink/am62a3.pdf
>>
>> Signed-off-by: Judith Mendez <jm@...com>
>> Signed-off-by: Nitin Yadav <n-yadav@...com>
>> ---
>
> Side note: will appreciate if the dt patches come via the SoC dt tree
> for TI K3 and not via mmc tree.
Will use DO NOT MERGE for v1, thanks.
>
>> arch/arm64/boot/dts/ti/k3-am62a-main.dtsi | 18 ++++++++++++++++++
>> 1 file changed, 18 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
>> index f0b8c9ab1459..523dee78123a 100644
>> --- a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
>> +++ b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
>> @@ -536,6 +536,24 @@ main_gpio1: gpio@...000 {
>> status = "disabled";
>> };
>>
>> + sdhci0: mmc@...0000 {
>> + compatible = "ti,am62-sdhci";
>> + reg = <0x00 0xfa10000 0x00 0x260>, <0x00 0xfa18000 0x00 0x134>;
>> + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
>> + power-domains = <&k3_pds 57 TI_SCI_PD_EXCLUSIVE>;
>> + clocks = <&k3_clks 57 5>, <&k3_clks 57 6>;
>> + clock-names = "clk_ahb", "clk_xin";
>> + assigned-clocks = <&k3_clks 57 6>;
>> + assigned-clock-parents = <&k3_clks 57 8>;
>> + bus-width = <8>;
>> + mmc-hs200-1_8v;
>> + ti,clkbuf-sel = <0x7>;
>> + ti,otap-del-sel-legacy = <0x0>;
>> + ti,otap-del-sel-mmc-hs = <0x0>;
>> + ti,otap-del-sel-hs200 = <0x6>;
>> + status = "disabled";
>> + };
>> +
>> sdhci1: mmc@...0000 {
>> compatible = "ti,am62-sdhci";
>> reg = <0x00 0xfa00000 0x00 0x260>, <0x00 0xfa08000 0x00 0x134>;
>> --
>> 2.34.1
>>
>
Powered by blists - more mailing lists