linux-kernel - [PATCH 00/12] Add TI-SCI reboot driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20240131221957.213717-1-afd@ti.com>
Date: Wed, 31 Jan 2024 16:19:45 -0600
From: Andrew Davis <afd@...com>
To: Nishanth Menon <nm@...com>, Tero Kristo <kristo@...nel.org>,
        Santosh
 Shilimkar <ssantosh@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof
 Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Conor Dooley
	<conor+dt@...nel.org>,
        Sebastian Reichel <sre@...nel.org>,
        Vignesh
 Raghavendra <vigneshr@...com>
CC: <linux-arm-kernel@...ts.infradead.org>, <devicetree@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>, <linux-pm@...r.kernel.org>,
        Andrew Davis
	<afd@...com>
Subject: [PATCH 00/12] Add TI-SCI reboot driver

Hello all,

While PCSI normally handles reboot for K3, this is an available
fallback in case PCSI reboot fails. This driver is registered 
with low priority as we want PSCI to remain the main way these
devices are rebooted.

The important part is the binding/DT changes. Currently in
U-Boot (which use the Linux device trees) we may not have
PSCI available yet (pre TF-A) and so we need this node
to correctly reboot. Adding this node in U-Boot is one of
the last remaining deltas between the two project DT files. 

Thanks,
Andrew

Andrew Davis (12):
  dt-bindings: power: reset: Document ti,sci-reboot compatible
  dt-bindings: arm: keystone: ti-sci: Add reboot-controller child node
  power: reset: Add TI-SCI reboot driver
  arm64: dts: ti: k3-am64: Add reboot-controller node
  arm64: dts: ti: k3-am62: Add reboot-controller node
  arm64: dts: ti: k3-am62a: Add reboot-controller node
  arm64: dts: ti: k3-am62p: Add reboot-controller node
  arm64: dts: ti: k3-am65: Add reboot-controller node
  arm64: dts: ti: k3-j7200: Add reboot-controller node
  arm64: dts: ti: k3-j721e: Add reboot-controller node
  arm64: dts: ti: k3-j721s2: Add reboot-controller node
  arm64: dts: ti: k3-j784s4: Add reboot-controller node

 .../bindings/arm/keystone/ti,sci.yaml         |  8 +++
 .../bindings/power/reset/ti,sci-reboot.yaml   | 33 ++++++++++
 MAINTAINERS                                   |  2 +
 arch/arm64/boot/dts/ti/k3-am62-main.dtsi      |  5 ++
 arch/arm64/boot/dts/ti/k3-am62a-main.dtsi     |  4 ++
 arch/arm64/boot/dts/ti/k3-am62p-main.dtsi     |  5 ++
 arch/arm64/boot/dts/ti/k3-am64-main.dtsi      |  5 ++
 arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi    |  4 ++
 .../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi      |  4 ++
 .../boot/dts/ti/k3-j721e-mcu-wakeup.dtsi      |  4 ++
 .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi     |  4 ++
 .../boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi     |  5 ++
 drivers/power/reset/Kconfig                   |  7 +++
 drivers/power/reset/Makefile                  |  1 +
 drivers/power/reset/ti-sci-reboot.c           | 63 +++++++++++++++++++
 15 files changed, 154 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/power/reset/ti,sci-reboot.yaml
 create mode 100644 drivers/power/reset/ti-sci-reboot.c

-- 
2.39.2