[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id:
<20240131-expressatt_mxt224s_touchscreen-v2-1-4463ae0414b5@gmail.com>
Date: Wed, 31 Jan 2024 01:04:46 -0800
From: Rudraksha Gupta via B4 Relay <devnull+guptarud.gmail.com@...nel.org>
To: Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>, Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>
Cc: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, Rudraksha Gupta <guptarud@...il.com>
Subject: [PATCH v2 1/2] ARM: dts: qcom: msm8960: Add gsbi3 node
From: Rudraksha Gupta <guptarud@...il.com>
Copy gsbi3 node from qcom-apq8064.dtsi and set appropriate properties
Signed-off-by: Rudraksha Gupta <guptarud@...il.com>
---
arch/arm/boot/dts/qcom/qcom-msm8960-pins.dtsi | 21 ++++++++++++++++++++
arch/arm/boot/dts/qcom/qcom-msm8960.dtsi | 28 +++++++++++++++++++++++++++
2 files changed, 49 insertions(+)
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960-pins.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8960-pins.dtsi
new file mode 100644
index 000000000000..4fa982771288
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8960-pins.dtsi
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+&msmgpio {
+ i2c3_default_state: i2c3-default-state {
+ i2c3-pins {
+ pins = "gpio16", "gpio17";
+ function = "gsbi3";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
+
+ i2c3_sleep_state: i2c3-sleep-state {
+ i2c3-pins {
+ pins = "gpio16", "gpio17";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-bus-hold;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
index f420740e068e..93365298c5ae 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
@@ -359,5 +359,33 @@ usb_hs1_phy: phy {
};
};
};
+
+ gsbi3: gsbi@...00000 {
+ compatible = "qcom,gsbi-v1.0.0";
+ reg = <0x16200000 0x100>;
+ ranges;
+ cell-index = <3>;
+ clocks = <&gcc GSBI3_H_CLK>;
+ clock-names = "iface";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ status = "disabled";
+
+ gsbi3_i2c: i2c@...80000 {
+ compatible = "qcom,i2c-qup-v1.1.1";
+ reg = <0x16280000 0x1000>;
+ pinctrl-0 = <&i2c3_default_state>;
+ pinctrl-1 = <&i2c3_sleep_state>;
+ pinctrl-names = "default", "sleep";
+ interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GSBI3_QUP_CLK>,
+ <&gcc GSBI3_H_CLK>;
+ clock-names = "core", "iface";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+ };
};
};
+#include "qcom-msm8960-pins.dtsi"
--
2.43.0
Powered by blists - more mailing lists