Message-ID: <b945652a-d65e-4a57-bc4c-09809c26e59a@arm.com>
Date: Wed, 31 Jan 2024 18:49:34 +0530
From: Anshuman Khandual <anshuman.khandual@....com>
To: Alexandru Elisei <alexandru.elisei@....com>
Cc: catalin.marinas@....com, will@...nel.org, oliver.upton@...ux.dev,
 maz@...nel.org, james.morse@....com, suzuki.poulose@....com,
 yuzenghui@...wei.com, arnd@...db.de, akpm@...ux-foundation.org,
 mingo@...hat.com, peterz@...radead.org, juri.lelli@...hat.com,
 vincent.guittot@...aro.org, dietmar.eggemann@....com, rostedt@...dmis.org,
 bsegall@...gle.com, mgorman@...e.de, bristot@...hat.com,
 vschneid@...hat.com, mhiramat@...nel.org, rppt@...nel.org, hughd@...gle.com,
 pcc@...gle.com, steven.price@....com, vincenzo.frascino@....com,
 david@...hat.com, eugenis@...gle.com, kcc@...gle.com, hyesoo.yu@...sung.com,
 linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
 kvmarm@...ts.linux.dev, linux-fsdevel@...r.kernel.org,
 linux-arch@...r.kernel.org, linux-mm@...ck.org,
 linux-trace-kernel@...r.kernel.org
Subject: Re: [PATCH RFC v3 09/35] mm: cma: Introduce cma_remove_mem()

On 1/30/24 17:03, Alexandru Elisei wrote:
> Hi,
> 
> I really appreciate the feedback you have given me so far. I believe the
> commit message isn't clear enough and there has been a confusion.
> 
> A CMA user adds a CMA area to the cma_areas array with
> cma_declare_contiguous_nid() or cma_init_reserved_mem().
> init_cma_reserved_pageblock() then iterates over the array and activates
> all cma areas.

Agreed.

> 
> The function cma_remove_mem() is intended to be used to remove a cma area
> from the cma_areas array **before** the area has been activated.

Understood.

> 
> Usecase: a driver (in this case, the arm64 dynamic tag storage code)
> manages several cma areas. The driver successfully adds the first area to
> the cma_areas array. When the driver tries to adds the second area, the
> function fails. Without cma_remove_mem(), the driver has no way to prevent
> the first area from being freed to the page allocator. cma_remove_mem() is
> about providing a means to do cleanup in case of error.
> 
> Does that make more sense now?

How to ensure that cma_remove_mem() should get called by the driver before
core_initcall()---> cma_init_reserved_areas()---> cma_activate_area() chain
happens. Else cma_remove_mem() will miss out to clear cma->count and given
area will proceed to get activated like always.


> 
> Ok Tue, Jan 30, 2024 at 11:20:56AM +0530, Anshuman Khandual wrote:
>>
>>
>> On 1/25/24 22:12, Alexandru Elisei wrote:
>>> Memory is added to CMA with cma_declare_contiguous_nid() and
>>> cma_init_reserved_mem(). This memory is then put on the MIGRATE_CMA list in
>>> cma_init_reserved_areas(), where the page allocator can make use of it.
>>
>> cma_declare_contiguous_nid() reserves memory in memblock and marks the
> 
> You forgot about about cma_init_reserved_mem() which does the same thing,
> but yes, you are right.

Agreed, missed that. There are some direct cma_init_reserved_mem() calls as well.

> 
>> for subsequent CMA usage, where as cma_init_reserved_areas() activates
>> these memory areas through init_cma_reserved_pageblock(). Standard page
>> allocator only receives these memory via free_reserved_page() - only if
> 
> I don't think that's correct. init_cma_reserved_pageblock() clears the
> PG_reserved page flag, sets the migratetype to MIGRATE_CMA and then frees
> the page. After that, the page is available to the standard page allocator
> to use for allocation. Otherwise, what would be the point of the
> MIGRATE_CMA migratetype?

Understood and agreed.

> 
>> the page block activation fails.
> 
> For the sake of having a complete picture, I'll add that that only happens
> if cma->reserve_pages_on_error is false. If the CMA user sets the field to
> 'true' (with cma_reserve_pages_on_error()), then the pages in the CMA
> region are kept PG_reserved if activation fails.

Why cannot you use cma_reserve_pages_on_error() ?

> 
>>
>>>
>>> If a device manages multiple CMA areas, and there's an error when one of
>>> the areas is added to CMA, there is no mechanism for the device to prevent
>>
>> What kind of error ? init_cma_reserved_pageblock() fails ? But that will
>> not happen until cma_init_reserved_areas().
> 
> I think I haven't been clear enough. When I say that "an area is added
> to CMA", I mean that the memory region is added to cma_areas array, via
> cma_declare_contiguous_nid() or cma_init_reserved_mem(). There are several
> ways in which either function can fail.

Okay.

> 
>>
>>> the rest of the areas, which were added before the error occured, from
>>> being later added to the MIGRATE_CMA list.
>>
>> Why is this mechanism required ? cma_init_reserved_areas() scans over all
>> CMA areas and try and activate each of them sequentially. Why is not this
>> sufficient ?
> 
> This patch is about removing a struct cma from the cma_areas array after it
> has been added to the array, with cma_declare_contiguous_nid() or
> cma_init_reserved_mem(), to prevent the area from being activated in
> cma_init_reserved_areas(). Sorry for the confusion.
> 
> I'll add a check in cma_remove_mem() to fail if the cma area has been
> activated, and a comment to the function to explain its usage.

That will be a good check.

> 
>>
>>>
>>> Add cma_remove_mem() which allows a previously reserved CMA area to be
>>> removed and thus it cannot be used by the page allocator.
>>
>> Successfully activated CMA areas do not get used by the buddy allocator.
> 
> I don't believe that is correct, see above.
Apologies, it's my bad.

> 
>>
>>>
>>> Signed-off-by: Alexandru Elisei <alexandru.elisei@....com>
>>> ---
>>>
>>> Changes since rfc v2:
>>>
>>> * New patch.
>>>
>>>  include/linux/cma.h |  1 +
>>>  mm/cma.c            | 30 +++++++++++++++++++++++++++++-
>>>  2 files changed, 30 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/include/linux/cma.h b/include/linux/cma.h
>>> index e32559da6942..787cbec1702e 100644
>>> --- a/include/linux/cma.h
>>> +++ b/include/linux/cma.h
>>> @@ -48,6 +48,7 @@ extern int cma_init_reserved_mem(phys_addr_t base, phys_addr_t size,
>>>  					unsigned int order_per_bit,
>>>  					const char *name,
>>>  					struct cma **res_cma);
>>> +extern void cma_remove_mem(struct cma **res_cma);
>>>  extern struct page *cma_alloc(struct cma *cma, unsigned long count, unsigned int align,
>>>  			      bool no_warn);
>>>  extern int cma_alloc_range(struct cma *cma, unsigned long start, unsigned long count,
>>> diff --git a/mm/cma.c b/mm/cma.c
>>> index 4a0f68b9443b..2881bab12b01 100644
>>> --- a/mm/cma.c
>>> +++ b/mm/cma.c
>>> @@ -147,8 +147,12 @@ static int __init cma_init_reserved_areas(void)
>>>  {
>>>  	int i;
>>>  
>>> -	for (i = 0; i < cma_area_count; i++)
>>> +	for (i = 0; i < cma_area_count; i++) {
>>> +		/* Region was removed. */
>>> +		if (!cma_areas[i].count)
>>> +			continue;
>>
>> Skip previously added CMA area (now zeroed out) ?
> 
> Yes, that's what I meant with the comment "Region was removed". Do you
> think I should reword the comment?
> 
>>
>>>  		cma_activate_area(&cma_areas[i]);
>>> +	}
>>>  
>>>  	return 0;
>>>  }
>>
>> cma_init_reserved_areas() gets called via core_initcall(). Some how
>> platform/device needs to call cma_remove_mem() before core_initcall()
>> gets called ? This might be time sensitive.
> 
> I don't understand your point.
> 
>>
>>> @@ -216,6 +220,30 @@ int __init cma_init_reserved_mem(phys_addr_t base, phys_addr_t size,
>>>  	return 0;
>>>  }
>>>  
>>> +/**
>>> + * cma_remove_mem() - remove cma area
>>> + * @res_cma: Pointer to the cma region.
>>> + *
>>> + * This function removes a cma region created with cma_init_reserved_mem(). The
>>> + * ->count is set to 0.
>>> + */
>>> +void __init cma_remove_mem(struct cma **res_cma)
>>> +{
>>> +	struct cma *cma;
>>> +
>>> +	if (WARN_ON_ONCE(!res_cma || !(*res_cma)))
>>> +		return;
>>> +
>>> +	cma = *res_cma;
>>> +	if (WARN_ON_ONCE(!cma->count))
>>> +		return;
>>> +
>>> +	totalcma_pages -= cma->count;
>>> +	cma->count = 0;
>>> +
>>> +	*res_cma = NULL;
>>> +}
>>> +
>>>  /**
>>>   * cma_declare_contiguous_nid() - reserve custom contiguous area
>>>   * @base: Base address of the reserved area optional, use 0 for any
>>
>> But first please do explain what are the errors device or platform might
> 
> cma_declare_contiguous_nid() and cma_init_reserved_mem() can fail in a
> number of ways, the code should be self documenting.

But when they do fail - would not cma->count be left uninitialized as 0 ?
Hence the proposed check (!cma->count) in cma_init_reserved_areas() should
just do the trick without requiring an explicit cma_remove_mem() call.

> 
>> see on a previously marked CMA area so that removing them on way becomes
>> necessary preventing their activation via cma_init_reserved_areas().
> 
> I've described how the function is supposed to be used at the top of my
> reply.
> 
> Thanks,
> Alex

Powered by blists - more mailing lists