[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <799640ba-3b7f-474b-8d70-64ed013e0755@ti.com>
Date: Thu, 1 Feb 2024 14:08:53 -0600
From: Andrew Davis <afd@...com>
To: "Brnich, Brandon" <b-brnich@...com>, "Menon, Nishanth" <nm@...com>,
"Raghavendra, Vignesh" <vigneshr@...com>,
Tero Kristo <kristo@...nel.org>, Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski
<krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will@...nel.org>,
Bjorn Andersson <quic_bjorande@...cinc.com>,
Geert Uytterhoeven
<geert+renesas@...der.be>,
Arnd Bergmann <arnd@...db.de>,
Konrad Dybcio
<konrad.dybcio@...aro.org>,
Neil Armstrong <neil.armstrong@...aro.org>,
NĂcolas F . R . A . Prado <nfraprado@...labora.com>,
Marek Szyprowski <m.szyprowski@...sung.com>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"devicetree@...r.kernel.org"
<devicetree@...r.kernel.org>,
"linux-kernel@...r.kernel.org"
<linux-kernel@...r.kernel.org>,
"Etheridge, Darren" <detheridge@...com>
Subject: Re: [PATCH v3 1/6] arm64: dts: ti: k3-j784s4: Add Wave5 Video
Encoder/Decoder Node
On 2/1/24 1:13 PM, Brnich, Brandon wrote:
> Hi Andrew,
>
>> -----Original Message-----
>> From: Davis, Andrew <afd@...com>
>> Sent: Thursday, February 1, 2024 12:35 PM
>> To: Brnich, Brandon <b-brnich@...com>; Menon, Nishanth <nm@...com>;
>> Raghavendra, Vignesh <vigneshr@...com>; Tero Kristo <kristo@...nel.org>;
>> Rob Herring <robh+dt@...nel.org>; Krzysztof Kozlowski
>> <krzysztof.kozlowski+dt@...aro.org>; Conor Dooley <conor+dt@...nel.org>;
>> Catalin Marinas <catalin.marinas@....com>; Will Deacon
>> <will@...nel.org>; Bjorn Andersson <quic_bjorande@...cinc.com>; Geert
>> Uytterhoeven <geert+renesas@...der.be>; Arnd Bergmann
>> <arnd@...db.de>; Konrad Dybcio <konrad.dybcio@...aro.org>; Neil
>> Armstrong <neil.armstrong@...aro.org>; NĂcolas F . R . A . Prado
>> <nfraprado@...labora.com>; Marek Szyprowski
>> <m.szyprowski@...sung.com>; linux-arm-kernel@...ts.infradead.org;
>> devicetree@...r.kernel.org; linux-kernel@...r.kernel.org; Etheridge, Darren
>> <detheridge@...com>
>> Subject: Re: [PATCH v3 1/6] arm64: dts: ti: k3-j784s4: Add Wave5 Video
>> Encoder/Decoder Node
>>
>> On 1/31/24 3:26 PM, Brandon Brnich wrote:
>>> This patch adds support for the Wave521cl on the J784S4-evm.
>>>
>>> Signed-off-by: Brandon Brnich <b-brnich@...com>
>>> ---
>>> arch/arm64/boot/dts/ti/k3-j784s4-evm.dts | 8 ++++++++
>>> arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 20 ++++++++++++++++++++
>>> arch/arm64/boot/dts/ti/k3-j784s4.dtsi | 2 ++
>>> 3 files changed, 30 insertions(+)
>>>
>>> diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
>>> b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
>>> index f34b92acc56d..7d37c11b4df4 100644
>>> --- a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
>>> +++ b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
>>> @@ -784,6 +784,14 @@ &main_gpio0 {
>>> status = "okay";
>>> };
>>>
>>> +&vpu0 {
>>> + status = "okay";
>>> +};
>>> +
>>> +&vpu1 {
>>> + status = "okay";
>>> +};
>>> +
>>> &mcu_cpsw {
>>> status = "okay";
>>> pinctrl-names = "default";
>>> diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
>>> b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
>>> index f2b720ed1e4f..8b2623ac8160 100644
>>> --- a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
>>> +++ b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
>>> @@ -662,6 +662,26 @@ main_i2c6: i2c@...0000 {
>>> status = "disabled";
>>> };
>>>
>>> + vpu0: video-codec@...0000 {
>>> + compatible = "ti,j721s2-wave521c", "cnm,wave521c";
>>> + reg = <0x00 0x4210000 0x00 0x10000>;
>>> + interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
>>> + clocks = <&k3_clks 241 2>;
>>> + clock-names = "vcodec";
>>> + power-domains = <&k3_pds 241 TI_SCI_PD_EXCLUSIVE>;
>>> + status = "disabled";
>>
>> Why are these default disabled? I don't see anything missing that would
>> need to be added at the board level. You disable them just to re-enable them
>> in the next patch. Leave these default enabled.
>
> I thought that disabled by default was the standard for node in dtsi files, where
> they get specifically enabled in the particular dts file for the SoC.
>
Only disabled if there is missing information needed for the node to function
that can only be added at the board level, e.g. pinmux usually.
> In V4 I will remove the disabled by default. Should this apply to all platforms in
> the series?
Yes
Andrew
>
>>> + };
>>> +
>>> + vpu1: video-codec@...0000 {
>>> + compatible = "ti,j721s2-wave521c", "cnm,wave521c";
>>> + reg = <0x00 0x4220000 0x00 0x10000>;
>>> + interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
>>> + clocks = <&k3_clks 242 2>;
>>> + clock-names = "vcodec";
>>> + power-domains = <&k3_pds 242 TI_SCI_PD_EXCLUSIVE>;
>>> + status = "disabled";
>>> + };
>>> +
>>> main_sdhci0: mmc@...0000 {
>>> compatible = "ti,j721e-sdhci-8bit";
>>> reg = <0x00 0x04f80000 0x00 0x1000>, diff --git
>>> a/arch/arm64/boot/dts/ti/k3-j784s4.dtsi
>>> b/arch/arm64/boot/dts/ti/k3-j784s4.dtsi
>>> index 4398c3a463e1..93bb0cba1b48 100644
>>> --- a/arch/arm64/boot/dts/ti/k3-j784s4.dtsi
>>> +++ b/arch/arm64/boot/dts/ti/k3-j784s4.dtsi
>>> @@ -247,6 +247,8 @@ cbass_main: bus@...000 {
>>> <0x00 0x30000000 0x00 0x30000000 0x00
>> 0x0c400000>, /* MAIN NAVSS */
>>> <0x41 0x00000000 0x41 0x00000000 0x01
>> 0x00000000>, /* PCIe1 DAT1 */
>>> <0x4e 0x20000000 0x4e 0x20000000 0x00
>> 0x00080000>, /* GPU */
>>> + <0x00 0x04210000 0x00 0x04210000 0x00
>> 0x00010000>, /* VPU0 */
>>> + <0x00 0x04220000 0x00 0x04220000 0x00
>> 0x00010000>, /* VPU1 */
>>
>> Add these in sorted by memory address order.
>
> Will do in V4 as well.
>
>>
>> Andrew
>>
>>>
>>> /* MCUSS_WKUP Range */
>>> <0x00 0x28380000 0x00 0x28380000 0x00
>> 0x03880000>,
>
> Brandon
Powered by blists - more mailing lists