[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID:
<TYCPR01MB86137941900C38F89EC2F321D8432@TYCPR01MB8613.jpnprd01.prod.outlook.com>
Date: Thu, 1 Feb 2024 03:07:24 +0000
From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@...esas.com>
To: Frank Li <Frank.Li@....com>, Bjorn Helgaas <bhelgaas@...gle.com>, Jingoo
Han <jingoohan1@...il.com>, Gustavo Pimentel <gustavo.pimentel@...opsys.com>,
Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>, Lorenzo Pieralisi
<lpieralisi@...nel.org>, Krzysztof WilczyĆski
<kw@...ux.com>, Rob Herring <robh@...nel.org>, Krzysztof Kozlowski
<krzysztof.kozlowski+dt@...aro.org>, Conor Dooley <conor+dt@...nel.org>,
"imx@...ts.linux.dev" <imx@...ts.linux.dev>
CC: "linux-pci@...r.kernel.org" <linux-pci@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>, Serge Semin
<fancer.lancer@...il.com>
Subject: RE: [PATCH 3/6] PCI: dwc: Add outbound MSG TLPs support
Hi Frank,
> From: Frank Li, Sent: Wednesday, January 31, 2024 9:45 AM
>
> From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@...esas.com>
>
> Add "code" and "routing" into struct dw_pcie_ob_atu_cfg for triggering
> INTx IRQs by iATU in the PCIe endpoint mode in near the future.
> PCIE_ATU_INHIBIT_PAYLOAD is set to issue TLP type of Msg instead of
> MsgD. So, this implementation supports the data-less messages only
> for now.
>
> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@...esas.com>
> Reviewed-by: Serge Semin <fancer.lancer@...il.com>
> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
Perhaps, your Signed-off-by is needed here?
Best regards,
Yoshihiro Shimoda
> ---
> drivers/pci/controller/dwc/pcie-designware.c | 9 +++++++--
> drivers/pci/controller/dwc/pcie-designware.h | 4 ++++
> 2 files changed, 11 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
> index df2575ec5f44c..ba909fade9db1 100644
> --- a/drivers/pci/controller/dwc/pcie-designware.c
> +++ b/drivers/pci/controller/dwc/pcie-designware.c
> @@ -499,7 +499,7 @@ int dw_pcie_prog_outbound_atu(struct dw_pcie *pci,
> dw_pcie_writel_atu_ob(pci, atu->index, PCIE_ATU_UPPER_TARGET,
> upper_32_bits(atu->pci_addr));
>
> - val = atu->type | PCIE_ATU_FUNC_NUM(atu->func_no);
> + val = atu->type | atu->routing | PCIE_ATU_FUNC_NUM(atu->func_no);
> if (upper_32_bits(limit_addr) > upper_32_bits(cpu_addr) &&
> dw_pcie_ver_is_ge(pci, 460A))
> val |= PCIE_ATU_INCREASE_REGION_SIZE;
> @@ -507,7 +507,12 @@ int dw_pcie_prog_outbound_atu(struct dw_pcie *pci,
> val = dw_pcie_enable_ecrc(val);
> dw_pcie_writel_atu_ob(pci, atu->index, PCIE_ATU_REGION_CTRL1, val);
>
> - dw_pcie_writel_atu_ob(pci, atu->index, PCIE_ATU_REGION_CTRL2, PCIE_ATU_ENABLE);
> + val = PCIE_ATU_ENABLE;
> + if (atu->type == PCIE_ATU_TYPE_MSG) {
> + /* The data-less messages only for now */
> + val |= PCIE_ATU_INHIBIT_PAYLOAD | atu->code;
> + }
> + dw_pcie_writel_atu_ob(pci, atu->index, PCIE_ATU_REGION_CTRL2, val);
>
> /*
> * Make sure ATU enable takes effect before any subsequent config
> diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
> index d21db82e586d5..703b50bc5e0f1 100644
> --- a/drivers/pci/controller/dwc/pcie-designware.h
> +++ b/drivers/pci/controller/dwc/pcie-designware.h
> @@ -148,11 +148,13 @@
> #define PCIE_ATU_TYPE_IO 0x2
> #define PCIE_ATU_TYPE_CFG0 0x4
> #define PCIE_ATU_TYPE_CFG1 0x5
> +#define PCIE_ATU_TYPE_MSG 0x10
> #define PCIE_ATU_TD BIT(8)
> #define PCIE_ATU_FUNC_NUM(pf) ((pf) << 20)
> #define PCIE_ATU_REGION_CTRL2 0x004
> #define PCIE_ATU_ENABLE BIT(31)
> #define PCIE_ATU_BAR_MODE_ENABLE BIT(30)
> +#define PCIE_ATU_INHIBIT_PAYLOAD BIT(22)
> #define PCIE_ATU_FUNC_NUM_MATCH_EN BIT(19)
> #define PCIE_ATU_LOWER_BASE 0x008
> #define PCIE_ATU_UPPER_BASE 0x00C
> @@ -303,6 +305,8 @@ struct dw_pcie_ob_atu_cfg {
> int index;
> int type;
> u8 func_no;
> + u8 code;
> + u8 routing;
> u64 cpu_addr;
> u64 pci_addr;
> u64 size;
>
> --
> 2.34.1
Powered by blists - more mailing lists