Message-ID: <670808962822c7f3be7072f5bcd8cec6536e98bc.camel@gmail.com>
Date: Thu, 01 Feb 2024 09:24:39 +0100
From: Nuno Sá <noname.nuno@...il.com>
To: "Rafael J. Wysocki" <rafael@...nel.org>
Cc: nuno.sa@...log.com, Greg Kroah-Hartman <gregkh@...uxfoundation.org>, 
 Frank Rowand <frowand.list@...il.com>, Rob Herring <robh+dt@...nel.org>,
 linux-kernel@...r.kernel.org,  Saravana Kannan <saravanak@...gle.com>
Subject: Re: [PATCH RESEND RFC] driver: core: don't queue device links
 removal for dt overlays

On Wed, 2024-01-31 at 17:05 +0100, Rafael J. Wysocki wrote:
> On Wed, Jan 31, 2024 at 4:46 PM Nuno Sá <noname.nuno@...il.com> wrote:
> > 
> > On Wed, 2024-01-31 at 16:10 +0100, Rafael J. Wysocki wrote:
> > > On Wed, Jan 31, 2024 at 3:52 PM Nuno Sá <noname.nuno@...il.com> wrote:
> > > > 
> > > > On Wed, 2024-01-31 at 15:28 +0100, Rafael J. Wysocki wrote:
> > > > > On Wed, Jan 31, 2024 at 3:18 PM Nuno Sá <noname.nuno@...il.com> wrote:
> > > > > > 
> > > > > > On Wed, 2024-01-31 at 14:30 +0100, Rafael J. Wysocki wrote:
> > > > > > > On Wed, Jan 31, 2024 at 1:20 PM Nuno Sá <noname.nuno@...il.com> wrote:
> > > > > > > > 
> > > > > > > > On Tue, 2024-01-23 at 16:40 +0100, Nuno Sa via B4 Relay wrote:
> > > > > > > > > From: Nuno Sa <nuno.sa@...log.com>
> > > > > > > > > 
> > > > > > > > > For device links, releasing the supplier/consumer devices
> > > > > > > > > references
> > > > > > > > > happens asynchronously in device_link_release_fn(). Hence, the
> > > > > > > > > possible
> > > > > > > > > release of an of_node is also asynchronous. If these nodes were
> > > > > > > > > added
> > > > > > > > > through overlays we have a problem because this does not respect
> > > > > > > > > the
> > > > > > > > > devicetree overlays assumptions that when a changeset is
> > > > > > > > > being removed in __of_changeset_entry_destroy(), it must hold the
> > > > > > > > > last
> > > > > > > > > reference to that node. Due to the async nature of device links
> > > > > > > > > that
> > > > > > > > > cannot be guaranteed.
> > > > > > > > > 
> > > > > > > > > Given the above, in case one of the link consumer/supplier is part
> > > > > > > > > of
> > > > > > > > > an overlay node we call directly device_link_release_fn() instead
> > > > > > > > > of
> > > > > > > > > queueing it. Yes, it might take some significant time for
> > > > > > > > > device_link_release_fn() to complete because of synchronize_srcu()
> > > > > > > > > but
> > > > > > > > > we would need to, anyways, wait for all OF references to be
> > > > > > > > > released
> > > > > > > > > if
> > > > > > > > > we want to respect overlays assumptions.
> > > > > > > > > 
> > > > > > > > > Signed-off-by: Nuno Sa <nuno.sa@...log.com>
> > > > > > > > > ---
> > > > > > > > > This RFC is a follow up of a previous one that I sent to the
> > > > > > > > > devicetree
> > > > > > > > > folks [1]. It got rejected because it was not really fixing the
> > > > > > > > > root
> > > > > > > > > cause of the issue (which I do agree). Please see the link where I
> > > > > > > > > fully explain what the issue is.
> > > > > > > > > 
> > > > > > > > > I did also some git blaming and did saw that commit
> > > > > > > > > 80dd33cf72d1 ("drivers: base: Fix device link removal") introduced
> > > > > > > > > queue_work() as we could be releasing the last device reference
> > > > > > > > > and
> > > > > > > > > hence
> > > > > > > > > sleeping which is against SRCU callback requirements. However,
> > > > > > > > > that
> > > > > > > > > same
> > > > > > > > > commit is now making use of synchronize_srcu() which may take
> > > > > > > > > significant time (and I think that's the reason for the work
> > > > > > > > > item?).
> > > > > > > > > 
> > > > > > > > > However, given the dt overlays requirements, I'm not seeing any
> > > > > > > > > reason to not be able to run device_link_release_fn()
> > > > > > > > > synchronously if
> > > > > > > > > we
> > > > > > > > > detect an OVERLAY node is being released. I mean, even if we come
> > > > > > > > > up
> > > > > > > > > (and I did some experiments in this regard) with some async
> > > > > > > > > mechanism
> > > > > > > > > to
> > > > > > > > > release the OF nodes refcounts, we still need a synchronization
> > > > > > > > > point
> > > > > > > > > somewhere.
> > > > > > > > > 
> > > > > > > > > Anyways, I would like to have some feedback on how acceptable
> > > > > > > > > would
> > > > > > > > > this
> > > > > > > > > be or what else could I do so we can have a "clean" dt overlay
> > > > > > > > > removal.
> > > > > > > > > 
> > > > > > > > > I'm also including dt folks so they can give some comments on the
> > > > > > > > > new
> > > > > > > > > device_node_overlay_removal() function. My goal is to try to
> > > > > > > > > detect
> > > > > > > > > when
> > > > > > > > > an
> > > > > > > > > overlay is being removed (maybe we could even have an explicit
> > > > > > > > > flag
> > > > > > > > > for
> > > > > > > > > it?) and only directly call device_link_release_fn() in that case.
> > > > > > > > > 
> > > > > > > > > [1]:
> > > > > > > > > https://lore.kernel.org/linux-devicetree/20230511151047.1779841-1-nuno.sa@analog.com/
> > > > > > > > > ---
> > > > > > > > >  drivers/base/core.c | 25 ++++++++++++++++++++++++-
> > > > > > > > >  1 file changed, 24 insertions(+), 1 deletion(-)
> > > > > > > > > 
> > > > > > > > > diff --git a/drivers/base/core.c b/drivers/base/core.c
> > > > > > > > > index 14d46af40f9a..31ea001f6142 100644
> > > > > > > > > --- a/drivers/base/core.c
> > > > > > > > > +++ b/drivers/base/core.c
> > > > > > > > > @@ -497,6 +497,18 @@ static struct attribute *devlink_attrs[] = {
> > > > > > > > >  };
> > > > > > > > >  ATTRIBUTE_GROUPS(devlink);
> > > > > > > > > 
> > > > > > > > > +static bool device_node_overlay_removal(struct device *dev)
> > > > > > > > > +{
> > > > > > > > > +     if (!dev_of_node(dev))
> > > > > > > > > +             return false;
> > > > > > > > > +     if (!of_node_check_flag(dev->of_node, OF_DETACHED))
> > > > > > > > > +             return false;
> > > > > > > > > +     if (!of_node_check_flag(dev->of_node, OF_OVERLAY))
> > > > > > > > > +             return false;
> > > > > > > > > +
> > > > > > > > > +     return true;
> > > > > > > > > +}
> > > > > > > > > +
> > > > > > > > >  static void device_link_release_fn(struct work_struct *work)
> > > > > > > > >  {
> > > > > > > > >       struct device_link *link = container_of(work, struct
> > > > > > > > > device_link,
> > > > > > > > > rm_work);
> > > > > > > > > @@ -532,8 +544,19 @@ static void devlink_dev_release(struct device
> > > > > > > > > *dev)
> > > > > > > > >        * synchronization in device_link_release_fn() and if the
> > > > > > > > > consumer
> > > > > > > > > or
> > > > > > > > >        * supplier devices get deleted when it runs, so put it into
> > > > > > > > > the
> > > > > > > > > "long"
> > > > > > > > >        * workqueue.
> > > > > > > > > +      *
> > > > > > > > > +      * However, if any of the supplier, consumer nodes is being
> > > > > > > > > removed
> > > > > > > > > +      * through overlay removal, the expectation in
> > > > > > > > > +      * __of_changeset_entry_destroy() is for the node 'kref' to
> > > > > > > > > be 1
> > > > > > > > > which
> > > > > > > > > +      * cannot be guaranteed with the async nature of
> > > > > > > > > +      * device_link_release_fn(). Hence, do it synchronously for
> > > > > > > > > the
> > > > > > > > > overlay
> > > > > > > > > +      * case.
> > > > > > > > >        */
> > > > > > > > > -     queue_work(system_long_wq, &link->rm_work);
> > > > > > > > > +     if (device_node_overlay_removal(link->consumer) ||
> > > > > > > > > +         device_node_overlay_removal(link->supplier))
> > > > > > > > > +             device_link_release_fn(&link->rm_work);
> > > > > > > > > +     else
> > > > > > > > > +             queue_work(system_long_wq, &link->rm_work);
> > > > > > > > >  }
> > > > > > > > > 
> > > > > > > > >  static struct class devlink_class = {
> > > > > > > > > 
> > > > > > > > > ---
> > > 
> > > [cut]
> > > 
> > > > > No, IMV devlink_dev_release() needs to be called via
> > > > > device_link_put_kref(), but it may run device_link_release_fn()
> > > > > directly if the link is marked in a special way or something like
> > > > > this.
> > > > 
> > > > Sorry, I'm not totally getting this. I'm directly calling
> > > > device_link_release_fn() from  devlink_dev_release(). We should only get
> > > > into
> > > > devlink_dev_release() after all the references are dropped right (being it
> > > > the
> > > > release callback for the link class)?
> > > 
> > > OK, I got confused somehow, sorry.
> > > 
> > > It should work.
> > > 
> > > I kind of don't like adding OF-specific code to the driver core, but
> > > if this is fine with Greg, it can be done.  It should depend on
> > 
> > Not perfect but I'm not seeing any other way. We need to somehow see if the node
> > is part of an OVERLAY and AFAIK, the only way is looking at the node flags. I'll
> > wait on Greg's feedback.
> > 
> > > CONFIG_OF_OVERLAY, though.
> > 
> > I guess that should be already indirectly implied. I mean if CONFIG_OF_OVERLAY
> > is not set, I guess there's not way for
> > of_node_check_flag(dev->of_node, OF_OVERLAY)) return true. But yeah, I can bail
> > out right away if IS_ENABLED(CONFIG_OF_OVERLAY) is not set.
> > 
> > > I would like a comment to be added to device_link_release_fn() to
> > > explain why the overlay case needs synchronous execution in there.
> > 
> > I do have the following comment before checking device_node_overlay_removal():
> > 
> > 
> > "* However, if any of the supplier, consumer nodes is being removed
> >  * through overlay removal, the expectation in
> >  * __of_changeset_entry_destroy() is for the node 'kref' to be 1 which
> >  * cannot be guaranteed with the async nature of
> >  * device_link_release_fn(). Hence, do it synchronously for the overlay
> >  * case."
> > 
> > I can elaborate more if you prefer...
> 
> No, that should suffice IMV, thanks.
> 
> Now that I think of it there is one more possibility: A dedicated
> workqueue can be used for running device_link_release_fn() and the DT
> overlay code can flush it after the device link deletion.

Hmm, I did some experiments with that but having a work item per kobject (being that
the common thing between of_node and device) but that (even though it worked) ended
up being overly complicated.

I think I went with the above because, in theory, you can have DT waiting for
unrelated releases but that should really be a corner a case. So, if you prefer a
dedicated queue I can give that a try to see how it looks like. Thinking in
allocating a queue (maybe with the same flags as system_long_wq) in:

devlink_class_init()

Then we can have a new fwnode_link_flush_queue() helper to call from DT. Naming it
like this as DT guys might also not like much of having device specific calls in
there (and fwnode_link) actually fits IMO).

Is it something like this that you have in mind?


Thanks for helping!
- Nuno Sá

Powered by blists - more mailing lists