[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <ca618c6e-ef29-4ee5-860f-68b48ebbeb9e@linaro.org>
Date: Thu, 1 Feb 2024 10:36:37 +0100
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Théo Lebrun <theo.lebrun@...tlin.com>,
Gregory CLEMENT <gregory.clement@...tlin.com>,
Michael Turquette <mturquette@...libre.com>, Stephen Boyd
<sboyd@...nel.org>, Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Thomas Bogendoerfer <tsbogend@...ha.franken.de>,
Linus Walleij <linus.walleij@...aro.org>, Rafał Miłecki
<rafal@...ecki.pl>, Philipp Zabel <p.zabel@...gutronix.de>
Cc: Vladimir Kondratiev <vladimir.kondratiev@...ileye.com>,
linux-mips@...r.kernel.org, linux-clk@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
Thomas Petazzoni <thomas.petazzoni@...tlin.com>,
Tawfik Bayouk <tawfik.bayouk@...ileye.com>, linux-gpio@...r.kernel.org
Subject: Re: [PATCH v4 07/18] dt-bindings: soc: mobileye: add EyeQ5 OLB system
controller
On 31/01/2024 17:26, Théo Lebrun wrote:
> Add documentation to describe the "Other Logic Block" syscon.
>
> Signed-off-by: Théo Lebrun <theo.lebrun@...tlin.com>
> ---
> .../bindings/soc/mobileye/mobileye,eyeq5-olb.yaml | 89 ++++++++++++++++++++++
> MAINTAINERS | 1 +
> 2 files changed, 90 insertions(+)
>
..
> +required:
> + - compatible
> + - reg
> + - '#address-cells'
> + - '#size-cells'
> + - ranges
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + soc {
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + system-controller@...000 {
> + compatible = "mobileye,eyeq5-olb", "syscon", "simple-mfd";
> + reg = <0x0 0xe00000 0x0 0x400>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x0 0xe00000 0x400>;
If there is going to be any resend:
1. ranges follows reg
2. Use lower-case hex
See DTS coding style.
> +
> + clocks: clock-controller@2c {
> + compatible = "mobileye,eyeq5-clk";
> + reg = <0x02C 0x50>, <0x11C 0x04>;
> + reg-names = "plls", "ospi";
> + #clock-cells = <1>;
> + clocks = <&xtal>;
> + clock-names = "ref";
> + };
> +
> + reset: reset-controller@0 {
0 is before 2c, keep nodes properly ordered.
> + compatible = "mobileye,eyeq5-reset";
> + reg = <0x000 0x0C>, <0x200 0x34>, <0x120 0x04>;
> + reg-names = "d0", "d1", "d2";
> + #reset-cells = <2>;
> + };
> +
> + pinctrl: pinctrl@b0 {
> + compatible = "mobileye,eyeq5-pinctrl";
> + reg = <0x0B0 0x30>;
This looks incomplete. Your binding mentions children, so provide at
least one child.
>
Best regards,
Krzysztof
Powered by blists - more mailing lists