lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Date: Thu,  1 Feb 2024 14:45:59 +0100
From: Christian Marangi <ansuelsmth@...il.com>
To: Bjorn Andersson <andersson@...nel.org>,
	Konrad Dybcio <konrad.dybcio@...aro.org>,
	Andrew Lunn <andrew@...n.ch>,
	Heiner Kallweit <hkallweit1@...il.com>,
	Russell King <linux@...linux.org.uk>,
	"David S. Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Jakub Kicinski <kuba@...nel.org>,
	Paolo Abeni <pabeni@...hat.com>,
	Christian Marangi <ansuelsmth@...il.com>,
	linux-arm-msm@...r.kernel.org,
	netdev@...r.kernel.org,
	linux-kernel@...r.kernel.org
Subject: [net-next PATCH 0/2] net: phy: qcom: qca808x: fixup qca808x LED

This is a bit embarassing and totally my fault so sorry for that!

While reworking the patch to phy_modify API, it was done a logic
error and made the brightness_set function broken. It wasn't
notice in last revisions test as the testing method was to verify
if hw control was correctly working.

Noticing this problem also made me notice an additional problem
with the polarity.

The introduced patch made the polarity configurable but I forgot
to add the required code to enable Active High by default.
(the PHY sets active low by default)

This wasn't notice with hw control testing as the LED blink on
traffic and polarity problem are not notice.

It might be worth discussing if needed a change in implementation
where the polarity function is always called but I think it's
better this way where specific PHY apply fixup with the help
of priv struct and on the config_init phase.

Christian Marangi (2):
  net: phy: qcom: qca808x: fix logic error in LED brightness set
  net: phy: qcom: qca808x: default to LED active High if not set

 drivers/net/phy/qcom/qca808x.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

-- 
2.43.0


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ