lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date: Fri, 2 Feb 2024 14:52:59 -0600
From: Rob Herring <robh@...nel.org>
To: Christian Marangi <ansuelsmth@...il.com>
Cc: "David S. Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
	Conor Dooley <conor+dt@...nel.org>,
	Bjorn Andersson <andersson@...nel.org>,
	Konrad Dybcio <konrad.dybcio@...aro.org>,
	Andrew Lunn <andrew@...n.ch>,
	Heiner Kallweit <hkallweit1@...il.com>,
	Russell King <linux@...linux.org.uk>,
	Frank Rowand <frowand.list@...il.com>,
	Robert Marko <robert.marko@...tura.hr>, netdev@...r.kernel.org,
	devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
	linux-arm-msm@...r.kernel.org
Subject: Re: [net-next PATCH v5 1/9] dt-bindings: net: document ethernet PHY
 package nodes

On Thu, Feb 01, 2024 at 04:17:27PM +0100, Christian Marangi wrote:
> Document ethernet PHY package nodes used to describe PHY shipped in
> bundle of 2-5 PHY. The special node describe a container of PHY that
> share common properties. This is a generic schema and PHY package
> should create specialized version with the required additional shared
> properties.
> 
> Example are PHY packages that have some regs only in one PHY of the
> package and will affect every other PHY in the package, for example
> related to PHY interface mode calibration or global PHY mode selection.
> 
> The PHY package node MUST declare the base address used by the PHY driver
> for global configuration by calculating the offsets of the global PHY
> based on the base address of the PHY package.
> 
> Each reg of the PHYs defined in the PHY Package node is an offset of the
> PHY Package reg.
> 
> Signed-off-by: Christian Marangi <ansuelsmth@...il.com>
> ---
>  .../bindings/net/ethernet-phy-package.yaml    | 55 +++++++++++++++++++
>  1 file changed, 55 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/net/ethernet-phy-package.yaml
> 
> diff --git a/Documentation/devicetree/bindings/net/ethernet-phy-package.yaml b/Documentation/devicetree/bindings/net/ethernet-phy-package.yaml
> new file mode 100644
> index 000000000000..d7cdbb1a4b3e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/ethernet-phy-package.yaml
> @@ -0,0 +1,55 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/ethernet-phy-package.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Ethernet PHY Package Common Properties
> +
> +maintainers:
> +  - Christian Marangi <ansuelsmth@...il.com>
> +
> +description:
> +  PHY packages are multi-port Ethernet PHY of the same family
> +  and each Ethernet PHY is affected by the global configuration
> +  of the PHY package.
> +
> +  Each reg of the PHYs defined in the PHY Package node is
> +  an offset of the PHY Package reg.
> +
> +  Each Ethernet PHYs defined in the PHY package node is
> +  reachable in the MDIO bus at the address of the PHY
> +  Package offset of the Ethernet PHY reg.

If the phys are addressed with an MDIO address, then just use those.

> +
> +properties:
> +  $nodename:
> +    pattern: "^ethernet-phy-package(@[a-f0-9]+)?$"

Can't be optional if 'reg' is required (which it should be).

> +
> +  reg:
> +    minimum: 0
> +    maximum: 31
> +    description:
> +      The base ID number for the PHY package.
> +      Commonly the ID of the first PHY in the PHY package.
> +
> +      Some PHY in the PHY package might be not defined but
> +      still occupy ID on the device (just not attached to
> +      anything) hence the PHY package reg might correspond
> +      to a not attached PHY (offset 0).
> +
> +  '#address-cells':
> +    const: 1
> +
> +  '#size-cells':
> +    const: 0
> +
> +patternProperties:
> +  ^ethernet-phy(@[a-f0-9]+)?$:

Same issue here.

> +    $ref: ethernet-phy.yaml#
> +
> +required:
> +  - reg
> +  - '#address-cells'
> +  - '#size-cells'
> +
> +additionalProperties: true
> -- 
> 2.43.0
> 

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ