| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20240205-dt-bindings-pci-qcom-split-continued-v1-2-c333cab5eeea@linaro.org>
Date: Mon, 05 Feb 2024 16:58:02 +0100
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Lorenzo Pieralisi <lpieralisi@...nel.org>,
Krzysztof Wilczyński <kw@...ux.com>,
Bjorn Helgaas <bhelgaas@...gle.com>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Rob Herring <robh+dt@...nel.org>, Conor Dooley <conor+dt@...nel.org>,
Manivannan Sadhasivam <mani@...nel.org>
Cc: linux-arm-msm@...r.kernel.org, linux-pci@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Subject: [PATCH 2/3] dt-bindings: PCI: qcom,pcie-sc7280: move SC7280 to
dedicated schema
Move SC7280 PCIe devices from qcom,pcie.yaml binding to a dedicated file
to make reviewing easier.
This creates equivalent schema file, except:
- Missing required compatible which is actually redundant.
- Expecting exactly one MSI interrupt, instead of eight, because I
could not find interrupt details for this model and current DTS uses
one interrupt.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
---
.../devicetree/bindings/pci/qcom,pcie-sc7280.yaml | 166 +++++++++++++++++++++
.../devicetree/bindings/pci/qcom,pcie.yaml | 38 -----
2 files changed, 166 insertions(+), 38 deletions(-)
diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sc7280.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sc7280.yaml
new file mode 100644
index 000000000000..634da24ec3ed
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sc7280.yaml
@@ -0,0 +1,166 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/qcom,pcie-sc7280.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC7280 PCI Express Root Complex
+
+maintainers:
+ - Bjorn Andersson <andersson@...nel.org>
+ - Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
+
+description:
+ Qualcomm SC7280 SoC PCIe root complex controller is based on the Synopsys
+ DesignWare PCIe IP.
+
+properties:
+ compatible:
+ const: qcom,pcie-sc7280
+
+ reg:
+ minItems: 5
+ maxItems: 6
+
+ reg-names:
+ minItems: 5
+ items:
+ - const: parf # Qualcomm specific registers
+ - const: dbi # DesignWare PCIe registers
+ - const: elbi # External local bus interface registers
+ - const: atu # ATU address space
+ - const: config # PCIe configuration space
+ - const: mhi # MHI registers
+
+ clocks:
+ minItems: 13
+ maxItems: 13
+
+ clock-names:
+ items:
+ - const: pipe # PIPE clock
+ - const: pipe_mux # PIPE MUX
+ - const: phy_pipe # PIPE output clock
+ - const: ref # REFERENCE clock
+ - const: aux # Auxiliary clock
+ - const: cfg # Configuration clock
+ - const: bus_master # Master AXI clock
+ - const: bus_slave # Slave AXI clock
+ - const: slave_q2a # Slave Q2A clock
+ - const: tbu # PCIe TBU clock
+ - const: ddrss_sf_tbu # PCIe SF TBU clock
+ - const: aggre0 # Aggre NoC PCIe CENTER SF AXI clock
+ - const: aggre1 # Aggre NoC PCIe1 AXI clock
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-names:
+ items:
+ - const: msi
+
+ resets:
+ maxItems: 1
+
+ reset-names:
+ items:
+ - const: pci
+
+ vddpe-3v3-supply:
+ description: PCIe endpoint power supply
+
+allOf:
+ - $ref: qcom,pcie-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,gcc-sc7280.h>
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ pcie@...8000 {
+ compatible = "qcom,pcie-sc7280";
+ reg = <0 0x01c08000 0 0x3000>,
+ <0 0x40000000 0 0xf1d>,
+ <0 0x40000f20 0 0xa8>,
+ <0 0x40001000 0 0x1000>,
+ <0 0x40100000 0 0x100000>;
+ reg-names = "parf", "dbi", "elbi", "atu", "config";
+ ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
+ <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
+
+ bus-range = <0x00 0xff>;
+ device_type = "pci";
+ linux,pci-domain = <1>;
+ num-lanes = <2>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
+ assigned-clock-rates = <19200000>;
+
+ clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
+ <&gcc GCC_PCIE_1_PIPE_CLK_SRC>,
+ <&pcie1_phy>,
+ <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_PCIE_1_AUX_CLK>,
+ <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
+ <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
+ <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
+ <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>,
+ <&gcc GCC_DDRSS_PCIE_SF_CLK>,
+ <&gcc GCC_AGGRE_NOC_PCIE_CENTER_SF_AXI_CLK>,
+ <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>;
+
+ clock-names = "pipe",
+ "pipe_mux",
+ "phy_pipe",
+ "ref",
+ "aux",
+ "cfg",
+ "bus_master",
+ "bus_slave",
+ "slave_q2a",
+ "tbu",
+ "ddrss_sf_tbu",
+ "aggre0",
+ "aggre1";
+
+ dma-coherent;
+
+ interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>;
+
+ iommu-map = <0x0 &apps_smmu 0x1c80 0x1>,
+ <0x100 &apps_smmu 0x1c81 0x1>;
+
+ phys = <&pcie1_phy>;
+ phy-names = "pciephy";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie1_clkreq_n>;
+
+ power-domains = <&gcc GCC_PCIE_1_GDSC>;
+
+ resets = <&gcc GCC_PCIE_1_BCR>;
+ reset-names = "pci";
+
+ perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
+ vddpe-3v3-supply = <&pp3300_ssd>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
index 9bfd35aa1df1..6c50d887ad5f 100644
--- a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
@@ -29,7 +29,6 @@ properties:
- qcom,pcie-msm8996
- qcom,pcie-qcs404
- qcom,pcie-sa8775p
- - qcom,pcie-sc7280
- qcom,pcie-sdm845
- qcom,pcie-sdx55
- items:
@@ -93,9 +92,6 @@ properties:
vdda_refclk-supply:
description: A phandle to the core analog power supply for IC which generates reference clock
- vddpe-3v3-supply:
- description: A phandle to the PCIe endpoint power supply
-
phys:
maxItems: 1
@@ -205,7 +201,6 @@ allOf:
contains:
enum:
- qcom,pcie-sa8775p
- - qcom,pcie-sc7280
- qcom,pcie-sdx55
then:
properties:
@@ -431,38 +426,6 @@ allOf:
- const: pwr # PWR reset
- const: ahb # AHB reset
- - if:
- properties:
- compatible:
- contains:
- enum:
- - qcom,pcie-sc7280
- then:
- properties:
- clocks:
- minItems: 13
- maxItems: 13
- clock-names:
- items:
- - const: pipe # PIPE clock
- - const: pipe_mux # PIPE MUX
- - const: phy_pipe # PIPE output clock
- - const: ref # REFERENCE clock
- - const: aux # Auxiliary clock
- - const: cfg # Configuration clock
- - const: bus_master # Master AXI clock
- - const: bus_slave # Slave AXI clock
- - const: slave_q2a # Slave Q2A clock
- - const: tbu # PCIe TBU clock
- - const: ddrss_sf_tbu # PCIe SF TBU clock
- - const: aggre0 # Aggre NoC PCIe CENTER SF AXI clock
- - const: aggre1 # Aggre NoC PCIe1 AXI clock
- resets:
- maxItems: 1
- reset-names:
- items:
- - const: pci # PCIe core reset
-
- if:
properties:
compatible:
@@ -603,7 +566,6 @@ allOf:
enum:
- qcom,pcie-msm8996
- qcom,pcie-sa8775p
- - qcom,pcie-sc7280
- qcom,pcie-sdm845
then:
oneOf:
--
2.34.1
Powered by blists - more mailing lists