lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240205164851.1351-2-ansuelsmth@gmail.com>
Date: Mon,  5 Feb 2024 17:48:33 +0100
From: Christian Marangi <ansuelsmth@...il.com>
To: "David S. Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Jakub Kicinski <kuba@...nel.org>,
	Paolo Abeni <pabeni@...hat.com>,
	Rob Herring <robh+dt@...nel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
	Conor Dooley <conor+dt@...nel.org>,
	Bjorn Andersson <andersson@...nel.org>,
	Konrad Dybcio <konrad.dybcio@...aro.org>,
	Andrew Lunn <andrew@...n.ch>,
	Heiner Kallweit <hkallweit1@...il.com>,
	Russell King <linux@...linux.org.uk>,
	Florian Fainelli <florian.fainelli@...adcom.com>,
	Broadcom internal kernel review list <bcm-kernel-feedback-list@...adcom.com>,
	Christian Marangi <ansuelsmth@...il.com>,
	Robert Marko <robert.marko@...tura.hr>,
	netdev@...r.kernel.org,
	devicetree@...r.kernel.org,
	linux-kernel@...r.kernel.org,
	linux-arm-msm@...r.kernel.org
Subject: [net-next PATCH v6 01/10] dt-bindings: net: document ethernet PHY package nodes

Document ethernet PHY package nodes used to describe PHY shipped in
bundle of 2-5 PHY. The special node describe a container of PHY that
share common properties. This is a generic schema and PHY package
should create specialized version with the required additional shared
properties.

Example are PHY packages that have some regs only in one PHY of the
package and will affect every other PHY in the package, for example
related to PHY interface mode calibration or global PHY mode selection.

The PHY package node MUST declare the base address used by the PHY driver
for global configuration by calculating the offsets of the global PHY
based on the base address of the PHY package.

Each reg of the PHYs defined in the PHY package node is absolute and
describe the real address of the Ethernet PHY on the bus.

Signed-off-by: Christian Marangi <ansuelsmth@...il.com>
---
 .../bindings/net/ethernet-phy-package.yaml    | 52 +++++++++++++++++++
 1 file changed, 52 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/ethernet-phy-package.yaml

diff --git a/Documentation/devicetree/bindings/net/ethernet-phy-package.yaml b/Documentation/devicetree/bindings/net/ethernet-phy-package.yaml
new file mode 100644
index 000000000000..e567101e6f38
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/ethernet-phy-package.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/ethernet-phy-package.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ethernet PHY Package Common Properties
+
+maintainers:
+  - Christian Marangi <ansuelsmth@...il.com>
+
+description:
+  PHY packages are multi-port Ethernet PHY of the same family
+  and each Ethernet PHY is affected by the global configuration
+  of the PHY package.
+
+  Each reg of the PHYs defined in the PHY package node is
+  absolute and describe the real address of the Ethernet PHY on
+  the MDIO bus.
+
+properties:
+  $nodename:
+    pattern: "^ethernet-phy-package@[a-f0-9]+$"
+
+  reg:
+    minimum: 0
+    maximum: 31
+    description:
+      The base ID number for the PHY package.
+      Commonly the ID of the first PHY in the PHY package.
+
+      Some PHY in the PHY package might be not defined but
+      still occupy ID on the device (just not attached to
+      anything) hence the PHY package reg might correspond
+      to a not attached PHY (offset 0).
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  ^ethernet-phy@[a-f0-9]+$:
+    $ref: ethernet-phy.yaml#
+
+required:
+  - reg
+  - '#address-cells'
+  - '#size-cells'
+
+additionalProperties: true
-- 
2.43.0


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ