[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240205080027.4565-7-mihai.sain@microchip.com>
Date: Mon, 5 Feb 2024 10:00:24 +0200
From: Mihai Sain <mihai.sain@...rochip.com>
To: <claudiu.beznea@...on.dev>, <robh+dt@...nel.org>,
<krzysztof.kozlowski+dt@...aro.org>, <conor+dt@...nel.org>,
<nicolas.ferre@...rochip.com>, <alexandre.belloni@...tlin.com>,
<devicetree@...r.kernel.org>, <linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>
CC: Mihai Sain <mihai.sain@...rochip.com>
Subject: [PATCH v2 6/8] ARM: dts: microchip: sama5d29_curiosity: Add power-supply properties for sdmmc nodes
The sdmmc0 and sdmmc1 controllers are powered from 3.3V regulator.
Add vmmc-supply and vqmmc-supply properties to sdmmc nodes.
The sdmmc controller from SAMA5D2 MPU has support for IO voltage signaling/switching required by the UHS sd-card.
In order to avoid the issues from the tuning procedure required by the UHS cards,
keep the vqmmc at 3V3 to use the sd high-speed mode.
Signed-off-by: Mihai Sain <mihai.sain@...rochip.com>
---
arch/arm/boot/dts/microchip/at91-sama5d29_curiosity.dts | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm/boot/dts/microchip/at91-sama5d29_curiosity.dts b/arch/arm/boot/dts/microchip/at91-sama5d29_curiosity.dts
index 6b02b7bcfd49..4a86597d089a 100644
--- a/arch/arm/boot/dts/microchip/at91-sama5d29_curiosity.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama5d29_curiosity.dts
@@ -504,6 +504,8 @@ &sdmmc0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sdmmc0_default>;
disable-wp;
+ vmmc-supply = <&vdd_3v3>;
+ vqmmc-supply = <&vdd_3v3>;
status = "okay";
};
@@ -512,6 +514,8 @@ &sdmmc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sdmmc1_default>;
disable-wp;
+ vmmc-supply = <&vdd_3v3>;
+ vqmmc-supply = <&vdd_3v3>;
status = "okay";
};
--
2.43.0
Powered by blists - more mailing lists