| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <6c5e2ca5-9b47-4a08-817c-e4bb1d10032f@kernel.org>
Date: Mon, 5 Feb 2024 14:57:32 +0200
From: Roger Quadros <rogerq@...nel.org>
To: "Anwar, Md Danish" <a0501179@...com>, MD Danish Anwar
<danishanwar@...com>, Vignesh Raghavendra <vigneshr@...com>,
Nishanth Menon <nm@...com>
Cc: Andrew Lunn <andrew@...n.ch>, Conor Dooley <conor+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Rob Herring <robh+dt@...nel.org>, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
Tero Kristo <kristo@...nel.org>, srk@...com, r-gunasekaran@...com
Subject: Re: [PATCH v3 3/3] arm64: dts: ti: k3-am642-evm: add overlay for
icssg1 2nd port
On 02/02/2024 18:50, Anwar, Md Danish wrote:
> On 2/2/2024 5:56 PM, Roger Quadros wrote:
>>
>>
>> On 22/01/2024 13:30, MD Danish Anwar wrote:
>>> The am642-evm doesn't allow to enable 2 x CPSW3g ports and 2 x ICSSG1 ports
>>> all together, so base k3-am642-evm.dts enables by default 2 x CPSW3g ports
>>> and 1 x ICSSG1 ports, but it also possible to support 1 x CPSW3g ports and
>>> 2 x ICSSG1 ports configuration.
>>
>> "it is also possible"
>>
>> OK so there can only be 3 ethernet ports on this board. There is no "ethernet3" alias.
>>
>
> Yes maximum there can be 3 ports only. By default 2 are cpsw and 1 icssg
> but this parch introduces overlay to change the muxed port into icssg.
>
> By default,
> ethernet0 = &cpsw_port1;
> ethernet1 = &cpsw_port2;
> ethernet2 = &icssg1_emac0;
>
> When this overlay is applied, it should be something like this,
> ethernet0 = &cpsw_port1;
> ethernet1 = &icssg1_emac0;
> ethernet2 = &icssg1_emac1;
>
> Let me know if this looks ok to you. I will modify the alias accordingly.
ethernet0 is ok
As per schematics: icssg1_emac0 is fixed to J21A port. so I'd call this ethernet1
J21B port can be switched between cpsw_port2 and icssg1_emac1. so I'd call this ethernet2
This way ethernet1 definition is fixed regardless and you are only switching ethernet2
definition.
>
>>>
>>> This patch adds overlay to support 1 x CPSW3g ports and 2 x ICSSG1 ports
>>> configuration:
>>> - Add label name 'mdio_mux_1' for 'mdio-mux-1' node so that the node
>>> 'mdio-mux-1' can be disabled in the overlay using the label name.
>>> - disable 2nd CPSW3g port
>>> - update CPSW3g pinmuxes to not use RGMII2
>>> - disable mdio-mux-1 and define mdio-mux-2 to route ICSSG1 MDIO to the
>>> shared DP83869 PHY
>>> - add and enable ICSSG1 RGMII2 pinmuxes
>>> - enable ICSSG1 MII1 port
>>>
>>> Signed-off-by: MD Danish Anwar <danishanwar@...com>
>>> ---
>>> arch/arm64/boot/dts/ti/Makefile | 5 ++
>>> .../dts/ti/k3-am642-evm-icssg1-dualemac.dtso | 75 +++++++++++++++++++
>>> arch/arm64/boot/dts/ti/k3-am642-evm.dts | 2 +-
>>> 3 files changed, 81 insertions(+), 1 deletion(-)
>>> create mode 100644 arch/arm64/boot/dts/ti/k3-am642-evm-icssg1-dualemac.dtso
>>>
>>> diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
>>> index 52c1dc910308..320b2fae5730 100644
>>> --- a/arch/arm64/boot/dts/ti/Makefile
>>> +++ b/arch/arm64/boot/dts/ti/Makefile
>>> @@ -43,6 +43,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-am642-sk.dtb
>>> dtb-$(CONFIG_ARCH_K3) += k3-am642-tqma64xxl-mbax4xxl.dtb
>>> dtb-$(CONFIG_ARCH_K3) += k3-am64-tqma64xxl-mbax4xxl-sdcard.dtbo
>>> dtb-$(CONFIG_ARCH_K3) += k3-am64-tqma64xxl-mbax4xxl-wlan.dtbo
>>> +dtb-$(CONFIG_ARCH_K3) += k3-am642-evm-icssg1-dualemac.dtbo
>>>
>>> # Boards with AM65x SoC
>>> k3-am654-gp-evm-dtbs := k3-am654-base-board.dtb k3-am654-base-board-rocktech-rk101-panel.dtbo
>>> @@ -105,6 +106,8 @@ k3-am642-tqma64xxl-mbax4xxl-sdcard-dtbs := \
>>> k3-am642-tqma64xxl-mbax4xxl.dtb k3-am64-tqma64xxl-mbax4xxl-sdcard.dtbo
>>> k3-am642-tqma64xxl-mbax4xxl-wlan-dtbs := \
>>> k3-am642-tqma64xxl-mbax4xxl.dtb k3-am64-tqma64xxl-mbax4xxl-wlan.dtbo
>>> +k3-am642-evm-icssg1-dualemac-dtbs := \
>>> + k3-am642-evm.dtb k3-am642-evm-icssg1-dualemac.dtbo
>>> k3-j721e-evm-pcie0-ep-dtbs := k3-j721e-common-proc-board.dtb \
>>> k3-j721e-evm-pcie0-ep.dtbo
>>> k3-j721s2-evm-pcie1-ep-dtbs := k3-j721s2-common-proc-board.dtb \
>>> @@ -120,6 +123,7 @@ dtb- += k3-am625-beagleplay-csi2-ov5640.dtb \
>>> k3-am62a7-sk-csi2-ov5640.dtb \
>>> k3-am642-tqma64xxl-mbax4xxl-sdcard.dtb \
>>> k3-am642-tqma64xxl-mbax4xxl-wlan.dtb \
>>> + k3-am642-evm-icssg1-dualemac.dtb \
>>> k3-j721e-evm-pcie0-ep.dtb \
>>> k3-j721s2-evm-pcie1-ep.dtb
>>>
>>> @@ -129,6 +133,7 @@ DTC_FLAGS_k3-am625-sk += -@
>>> DTC_FLAGS_k3-am62-lp-sk += -@
>>> DTC_FLAGS_k3-am62a7-sk += -@
>>> DTC_FLAGS_k3-am642-tqma64xxl-mbax4xxl += -@
>>> +DTC_FLAGS_k3-am642-evm += -@
>>> DTC_FLAGS_k3-am6548-iot2050-advanced-m2 += -@
>>> DTC_FLAGS_k3-j721e-common-proc-board += -@
>>> DTC_FLAGS_k3-j721s2-common-proc-board += -@
>>> diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm-icssg1-dualemac.dtso b/arch/arm64/boot/dts/ti/k3-am642-evm-icssg1-dualemac.dtso
>>> new file mode 100644
>>> index 000000000000..b2b1a6252e73
>>> --- /dev/null
>>> +++ b/arch/arm64/boot/dts/ti/k3-am642-evm-icssg1-dualemac.dtso
>>> @@ -0,0 +1,75 @@
>>> +// SPDX-License-Identifier: GPL-2.0
>>
>> Don't you need to use updated licensing header like in the series [1]
>>
>> [1] https://lore.kernel.org/all/20240110140903.4090946-1-nm@ti.com/
>>
>
> Sure. I will update the header.
>
>>> +/**
>>> + * DT overlay for enabling 2nd ICSSG1 port on AM642 EVM
>>> + *
>>> + * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/
>>> + */
>>> +
>>> +/dts-v1/;
>>> +/plugin/;
>>> +
>>> +#include <dt-bindings/gpio/gpio.h>
>>> +#include "k3-pinctrl.h"
>>> +
>>> +&{/} {
>>
>> You need to fixup alias for ethernet1 to icssg1_emac1?
>>
>
> Yes I will update the aliases accordingly.
>
>>> + mdio-mux-2 {
>>
>> this should be mdio-mux@0 ?
>>
>
> The main mux in evm dts is defined as mdio-mux-1 so I was following the
> same. I will change this to mdio-mux@0
>
>>> + compatible = "mdio-mux-multiplexer";
>>> + mux-controls = <&mdio_mux>;
>>> + mdio-parent-bus = <&icssg1_mdio>;
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> +
>>> + mdio@0 {
>>> + reg = <0x0>;
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> +
>>> + icssg1_phy2: ethernet-phy@3 {
>>> + reg = <3>;
>>> + tx-internal-delay-ps = <250>;
>>> + rx-internal-delay-ps = <2000>;
>>> + };
>>> + };
>>> + };
>>> +};
>>> +
>>> +&main_pmx0 {
>>> + icssg1_rgmii2_pins_default: icssg1-rgmii2-default-pins {
>>> + pinctrl-single,pins = <
>>> + AM64X_IOPAD(0x0108, PIN_INPUT, 2) /* (W11) PRG1_PRU1_GPO0.RGMII2_RD0 */
>>> + AM64X_IOPAD(0x010c, PIN_INPUT, 2) /* (V11) PRG1_PRU1_GPO1.RGMII2_RD1 */
>>> + AM64X_IOPAD(0x0110, PIN_INPUT, 2) /* (AA12) PRG1_PRU1_GPO2.RGMII2_RD2 */
>>> + AM64X_IOPAD(0x0114, PIN_INPUT, 2) /* (Y12) PRG1_PRU1_GPO3.RGMII2_RD3 */
>>> + AM64X_IOPAD(0x0120, PIN_INPUT, 2) /* (U11) PRG1_PRU1_GPO6.RGMII2_RXC */
>>> + AM64X_IOPAD(0x0118, PIN_INPUT, 2) /* (W12) PRG1_PRU1_GPO4.RGMII2_RX_CTL */
>>> + AM64X_IOPAD(0x0134, PIN_OUTPUT, 2) /* (AA10) PRG1_PRU1_GPO11.RGMII2_TD0 */
>>> + AM64X_IOPAD(0x0138, PIN_OUTPUT, 2) /* (V10) PRG1_PRU1_GPO12.RGMII2_TD1 */
>>> + AM64X_IOPAD(0x013c, PIN_OUTPUT, 2) /* (U10) PRG1_PRU1_GPO13.RGMII2_TD2 */
>>> + AM64X_IOPAD(0x0140, PIN_OUTPUT, 2) /* (AA11) PRG1_PRU1_GPO14.RGMII2_TD3 */
>>> + AM64X_IOPAD(0x0148, PIN_OUTPUT, 2) /* (Y10) PRG1_PRU1_GPO16.RGMII2_TXC */
>>> + AM64X_IOPAD(0x0144, PIN_OUTPUT, 2) /* (Y11) PRG1_PRU1_GPO15.RGMII2_TX_CTL */
>>> + >;
>>> + };
>>> +};
>>> +
>>> +&cpsw3g {
>>> + pinctrl-0 = <&rgmii1_pins_default>;
>>> +};
>>> +
>>> +&cpsw_port2 {
>>> + status = "disabled";
>>> +};
>>> +
>>> +&mdio_mux_1 {
>>> + status = "disabled";
>>> +};
>>> +
>>> +&icssg1_eth {
>>> + pinctrl-0 = <&icssg1_rgmii1_pins_default>, <&icssg1_rgmii2_pins_default>;
>>> +};
>>> +
>>> +&icssg1_emac1 {
>>> + status = "okay";
>>> + phy-handle = <&icssg1_phy2>;
>>> + phy-mode = "rgmii-id";
>>> +};
>>> diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm.dts b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
>>> index c08b0223be52..6ae43c12419f 100644
>>> --- a/arch/arm64/boot/dts/ti/k3-am642-evm.dts
>>> +++ b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
>>> @@ -200,7 +200,7 @@ mdio_mux: mux-controller {
>>> mux-gpios = <&exp1 12 GPIO_ACTIVE_HIGH>;
>>> };
>>>
>>> - mdio-mux-1 {
>>> + mdio_mux_1: mdio-mux-1 {
>>
>> mdio_mux_1: mdio-mux@1
>>
>
> Sure. I will update this.
>
>>> compatible = "mdio-mux-multiplexer";
>>> mux-controls = <&mdio_mux>;
>>> mdio-parent-bus = <&cpsw3g_mdio>;
>>
>
--
cheers,
-roger
Powered by blists - more mailing lists