linux-kernel - [PATCH v4 0/4] Add support for nuvoton ma35d1 pin control

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20240206025223.35147-1-ychuang570808@gmail.com>
Date: Tue,  6 Feb 2024 02:52:19 +0000
From: Jacky Huang <ychuang570808@...il.com>
To: linus.walleij@...aro.org,
	robh+dt@...nel.org,
	krzysztof.kozlowski+dt@...aro.org,
	conor+dt@...nel.org,
	p.zabel@...gutronix.de,
	j.neuschaefer@....net
Cc: linux-arm-kernel@...ts.infradead.org,
	linux-gpio@...r.kernel.org,
	devicetree@...r.kernel.org,
	linux-kernel@...r.kernel.org,
	ychuang3@...oton.com,
	schung@...oton.com
Subject: [PATCH v4 0/4] Add support for nuvoton ma35d1 pin control

From: Jacky Huang <ychuang3@...oton.com>

This patch series adds the pin control and GPIO driver for the nuvoton ma35d1
ARMv8 SoC. It includes DT binding documentation, the ma35d1 pin control driver,
and device tree updates.

This pin control driver has been tested on the ma35d1 som board with Linux 6.8-rc1.

v4:
  - Update the pinctrl driver Kconfig
    - Add depends to CONFIG_PINCTRL_MA35D1 to prevent compilation errors.
  - Update the pinctrl driver
    - Utilize devm_kcalloc() instead of devm_kzalloc().
    - Employ ARRAY_SIZE() instead of sizeof()/sizeof().

v3:
  - Update DTS and YAML files
    - Corrected the unit address of nodes gpioa ~ gpion.
    - Removed the invalid "pin-default" node.
    - Removed the phandle entry from "nuvoton,pins".
  - Update pinctrl driver
    - Fixed the Kconfig by using "depend on" instead of "if".
    - Removed unused #include of header files.
    - Utilized immutable irq_chip instead of dynamic irq_chip.
    - Replaced ma35_dt_free_map() with pinconf_generic_dt_free_map().
    - Implemented other minor fixes as suggested by the reviewer.

v2:
  - Update nuvoton,ma35d1-pinctrl.yaml
    - Update the 'nuvoton,pins' to follow the style of rockchip pinctrl approch.
    - Use power-source to indicate the pin voltage selection which follow the
      realtek pinctrl approch.
    - Instead of integer, use drive-strength-microamp to specify the real driving
      strength capability of IO pins.
  - Update ma35d1 pinctrl driver
    - Add I/O drive strength lookup table for translating device tree setting
      into control register.
  - Remove ma35d1-pinfunc.h which is unused after update definition of 'nuvoton,pins'.


Jacky Huang (4):
  dt-bindings: reset: Add syscon to nuvoton ma35d1 system-management
    node
  dt-bindings: pinctrl: Document nuvoton ma35d1 pin control
  arm64: dts: nuvoton: Add pinctrl support for ma35d1
  pinctrl: nuvoton: Add ma35d1 pinctrl and GPIO driver

 .../pinctrl/nuvoton,ma35d1-pinctrl.yaml       |  163 ++
 .../bindings/reset/nuvoton,ma35d1-reset.yaml  |    3 +-
 .../boot/dts/nuvoton/ma35d1-iot-512m.dts      |   80 +-
 .../boot/dts/nuvoton/ma35d1-som-256m.dts      |   83 +-
 arch/arm64/boot/dts/nuvoton/ma35d1.dtsi       |  150 +-
 drivers/pinctrl/nuvoton/Kconfig               |   19 +
 drivers/pinctrl/nuvoton/Makefile              |    2 +
 drivers/pinctrl/nuvoton/pinctrl-ma35.c        | 1211 +++++++++++
 drivers/pinctrl/nuvoton/pinctrl-ma35.h        |   50 +
 drivers/pinctrl/nuvoton/pinctrl-ma35d1.c      | 1797 +++++++++++++++++
 10 files changed, 3548 insertions(+), 10 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/nuvoton,ma35d1-pinctrl.yaml
 create mode 100644 drivers/pinctrl/nuvoton/pinctrl-ma35.c
 create mode 100644 drivers/pinctrl/nuvoton/pinctrl-ma35.h
 create mode 100644 drivers/pinctrl/nuvoton/pinctrl-ma35d1.c

-- 
2.34.1