lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240206231521.3600089-1-Frank.Li@nxp.com>
Date: Tue,  6 Feb 2024 18:15:21 -0500
From: Frank Li <Frank.Li@....com>
To: Shawn Guo <shawnguo@...nel.org>,
	Li Yang <leoyang.li@....com>,
	Rob Herring <robh+dt@...nel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
	Conor Dooley <conor+dt@...nel.org>,
	linux-arm-kernel@...ts.infradead.org (moderated list:ARM/FREESCALE LAYERSCAPE ARM ARCHITECTURE),
	devicetree@...r.kernel.org (open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS),
	linux-kernel@...r.kernel.org (open list)
Cc: imx@...ts.linux.dev
Subject: [PATCH 1/1] arm64: dts: lx2160a: Fix DTS for full PL011 UART

From: Heinz Wrobel <Heinz.Wrobel@....com>

The prior configuration was an SBSA UART that can't be configured or
modified, or even enabled if it isn't the boot console. With properly
defined clocks, the PL011 configuration can be used.

Signed-off-by: Heinz Wrobel <Heinz.Wrobel@....com>
Signed-off-by: Li Yang <leoyang.li@....com>
Signed-off-by: Frank Li <Frank.Li@....com>
---
 .../arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 32 ++++++++++++++-----
 1 file changed, 24 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
index 6640b49670ae5..e665c629e1a1f 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@@ -949,34 +949,50 @@ QORIQ_CLK_PLL_DIV(8)>,
 		};
 
 		uart0: serial@...0000 {
-			compatible = "arm,sbsa-uart","arm,pl011";
+			compatible = "arm,pl011", "arm,primecell";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(8)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(8)>;
+			clock-names = "uartclk", "apb_pclk";
 			reg = <0x0 0x21c0000 0x0 0x1000>;
 			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-			current-speed = <115200>;
 			status = "disabled";
 		};
 
 		uart1: serial@...0000 {
-			compatible = "arm,sbsa-uart","arm,pl011";
+			compatible = "arm,pl011", "arm,primecell";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(8)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(8)>;
+			clock-names = "uartclk", "apb_pclk";
 			reg = <0x0 0x21d0000 0x0 0x1000>;
 			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-			current-speed = <115200>;
 			status = "disabled";
 		};
 
 		uart2: serial@...0000 {
-			compatible = "arm,sbsa-uart","arm,pl011";
+			compatible = "arm,pl011", "arm,primecell";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(8)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(8)>;
+			clock-names = "uartclk", "apb_pclk";
 			reg = <0x0 0x21e0000 0x0 0x1000>;
 			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-			current-speed = <115200>;
 			status = "disabled";
 		};
 
 		uart3: serial@...0000 {
-			compatible = "arm,sbsa-uart","arm,pl011";
+			compatible = "arm,pl011", "arm,primecell";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(8)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(8)>;
+			clock-names = "uartclk", "apb_pclk";
 			reg = <0x0 0x21f0000 0x0 0x1000>;
 			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-			current-speed = <115200>;
 			status = "disabled";
 		};
 
-- 
2.34.1


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ