[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240206014151.GA11233@fastly.com>
Date: Mon, 5 Feb 2024 17:41:52 -0800
From: Joe Damato <jdamato@...tly.com>
To: Rahul Rameshbabu <rrameshbabu@...dia.com>
Cc: linux-kernel@...r.kernel.org, netdev@...r.kernel.org, tariqt@...dia.com,
Saeed Mahameed <saeedm@...dia.com>,
Leon Romanovsky <leon@...nel.org>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
"open list:MELLANOX MLX5 core VPI driver" <linux-rdma@...r.kernel.org>
Subject: Re: [PATCH net-next] eth: mlx5: link NAPI instances to queues and
IRQs
On Mon, Feb 05, 2024 at 05:33:39PM -0800, Rahul Rameshbabu wrote:
>
> On Mon, 05 Feb, 2024 17:32:47 -0800 Joe Damato <jdamato@...tly.com> wrote:
> > On Mon, Feb 05, 2024 at 05:09:09PM -0800, Rahul Rameshbabu wrote:
> >> On Tue, 06 Feb, 2024 01:03:11 +0000 Joe Damato <jdamato@...tly.com> wrote:
> >> > Make mlx5 compatible with the newly added netlink queue GET APIs.
> >> >
> >> > Signed-off-by: Joe Damato <jdamato@...tly.com>
> >> > ---
> >> > drivers/net/ethernet/mellanox/mlx5/core/en.h | 1 +
> >> > drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 8 ++++++++
> >> > 2 files changed, 9 insertions(+)
> >> >
> >> > diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en.h b/drivers/net/ethernet/mellanox/mlx5/core/en.h
> >> > index 55c6ace0acd5..3f86ee1831a8 100644
> >> > --- a/drivers/net/ethernet/mellanox/mlx5/core/en.h
> >> > +++ b/drivers/net/ethernet/mellanox/mlx5/core/en.h
> >> > @@ -768,6 +768,7 @@ struct mlx5e_channel {
> >> > u16 qos_sqs_size;
> >> > u8 num_tc;
> >> > u8 lag_port;
> >> > + unsigned int irq;
> >> >
> >> > /* XDP_REDIRECT */
> >> > struct mlx5e_xdpsq xdpsq;
> >> > diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
> >> > index c8e8f512803e..e1bfff1fb328 100644
> >> > --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
> >> > +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
> >> > @@ -2473,6 +2473,9 @@ static void mlx5e_close_queues(struct mlx5e_channel *c)
> >> > mlx5e_close_tx_cqs(c);
> >> > mlx5e_close_cq(&c->icosq.cq);
> >> > mlx5e_close_cq(&c->async_icosq.cq);
> >> > +
> >> > + netif_queue_set_napi(c->netdev, c->ix, NETDEV_QUEUE_TYPE_TX, NULL);
> >> > + netif_queue_set_napi(c->netdev, c->ix, NETDEV_QUEUE_TYPE_RX, NULL);
> >>
> >> This should be set to NULL *before* actually closing the rqs, sqs, and
> >> related cqs right? I would expect these two lines to be the first ones
> >> called in mlx5e_close_queues. Btw, I think this should be done in
> >> mlx5e_deactivate_channel where the NAPI is disabled.
> >>
> >> > }
> >> >
> >> > static u8 mlx5e_enumerate_lag_port(struct mlx5_core_dev *mdev, int ix)
> >> > @@ -2558,6 +2561,7 @@ static int mlx5e_open_channel(struct mlx5e_priv *priv, int ix,
> >> > c->stats = &priv->channel_stats[ix]->ch;
> >> > c->aff_mask = irq_get_effective_affinity_mask(irq);
> >> > c->lag_port = mlx5e_enumerate_lag_port(priv->mdev, ix);
> >> > + c->irq = irq;
> >> >
> >> > netif_napi_add(netdev, &c->napi, mlx5e_napi_poll);
> >> >
> >> > @@ -2602,6 +2606,10 @@ static void mlx5e_activate_channel(struct mlx5e_channel *c)
> >> > mlx5e_activate_xsk(c);
> >> > else
> >> > mlx5e_activate_rq(&c->rq);
> >> > +
> >> > + netif_napi_set_irq(&c->napi, c->irq);
>
> One small comment that I missed in my previous iteration. I think the
> above should be moved to mlx5e_open_channel right after netif_napi_add.
> This avoids needing to save the irq in struct mlx5e_channel.
I couldn't move it to mlx5e_open_channel because of how safe_switch_params
and the mechanics around that seem to work (at least as far as I could
tell).
mlx5 seems to create a new set of channels before closing the previous
channel. So, moving this logic to open_channels and close_channels means
you end up with a flow like this:
- Create new channels (NAPI netlink API is used to set NAPIs)
- Old channels are closed (NAPI netlink API sets NULL and overwrites the
previous NAPI netlink calls)
Now, the associations are all NULL.
I think moving the calls to active / deactivate fixes that problem, but
requires that irq is stored, if I am understanding the driver correctly.
> >> > + netif_queue_set_napi(c->netdev, c->ix, NETDEV_QUEUE_TYPE_TX, &c->napi);
> >> > + netif_queue_set_napi(c->netdev, c->ix, NETDEV_QUEUE_TYPE_RX, &c->napi);
> >>
> >> It's weird that netlink queue API is being configured in
> >> mlx5e_activate_channel and deconfigured in mlx5e_close_queues. This
> >> leads to a problem where the napi will be falsely referred to even when
> >> we deactivate the channels in mlx5e_switch_priv_channels and may not
> >> necessarily get to closing the channels due to an error.
> >>
> >> Typically, we use the following clean up patterns.
> >>
> >> mlx5e_activate_channel -> mlx5e_deactivate_channel
> >> mlx5e_open_queues -> mlx5e_close_queues
> >
> > OK, I'll move it to mlx5e_deactivate_channel before the NAPI is disabled.
> > That makes sense to me.
>
> Appreciated. Thank you for the patch btw.
Sure, thanks for the review.
Powered by blists - more mailing lists