| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20240206114349.32197-2-pmalgujar@marvell.com>
Date: Tue, 6 Feb 2024 03:43:46 -0800
From: Piyush Malgujar <pmalgujar@...vell.com>
To: <andi.shyti@...nel.org>, <linux-i2c@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
CC: <sgarapati@...vell.com>, <cchavva@...vell.com>, <jannadurai@...vell.com>,
Piyush Malgujar <pmalgujar@...vell.com>
Subject: [PATCH v3 1/4] i2c: thunderx: Clock divisor logic changes
From: Suneel Garapati <sgarapati@...vell.com>
Handle changes to clock divisor logic for OcteonTX2 SoC family using
subsystem ID and using default reference clock source as 100MHz.
Signed-off-by: Suneel Garapati <sgarapati@...vell.com>
Signed-off-by: Piyush Malgujar <pmalgujar@...vell.com>
Acked-by: Andi Shyti <andi.shyti@...nel.org>
---
MAINTAINERS | 1 +
drivers/i2c/busses/i2c-octeon-core.c | 29 ++++++++++++++++++++----
drivers/i2c/busses/i2c-octeon-core.h | 17 ++++++++++++++
drivers/i2c/busses/i2c-thunderx-pcidrv.c | 7 ++++++
4 files changed, 50 insertions(+), 4 deletions(-)
diff --git a/MAINTAINERS b/MAINTAINERS
index 960512bec42885c0f1632a7c90851c3d32fbf20e..92b0a55c36e41cf54c7cbf52576d5424b591aa31 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4725,6 +4725,7 @@ F: drivers/net/wireless/ath/carl9170/
CAVIUM I2C DRIVER
M: Robert Richter <rric@...nel.org>
+M: Suneel Garapati <sgarapati@...vell.com>
S: Odd Fixes
W: http://www.marvell.com
F: drivers/i2c/busses/i2c-octeon*
diff --git a/drivers/i2c/busses/i2c-octeon-core.c b/drivers/i2c/busses/i2c-octeon-core.c
index 845eda70b8cab52a0453c9f4cb545010fba4305d..1d8e1f4ad859dc44c08629637530842a0ed50bc4 100644
--- a/drivers/i2c/busses/i2c-octeon-core.c
+++ b/drivers/i2c/busses/i2c-octeon-core.c
@@ -17,6 +17,7 @@
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/pci.h>
#include "i2c-octeon-core.h"
@@ -658,31 +659,51 @@ int octeon_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
void octeon_i2c_set_clock(struct octeon_i2c *i2c)
{
int tclk, thp_base, inc, thp_idx, mdiv_idx, ndiv_idx, foscl, diff;
- int thp = 0x18, mdiv = 2, ndiv = 0, delta_hz = 1000000;
+ int mdiv_min = 2;
+ /* starting value on search for lowest diff */
+ const int huge_delta = INITIAL_DELTA_HZ;
+ /*
+ * Find divisors to produce target frequency, start with large delta
+ * to cover wider range of divisors, note thp = TCLK half period.
+ */
+ unsigned int thp = 0x18, mdiv = 2, ndiv = 0, delta_hz = huge_delta;
+
+ if (octeon_i2c_is_otx2(to_pci_dev(i2c->dev))) {
+ thp = 0x3;
+ mdiv_min = 0;
+ }
for (ndiv_idx = 0; ndiv_idx < 8 && delta_hz != 0; ndiv_idx++) {
/*
* An mdiv value of less than 2 seems to not work well
* with ds1337 RTCs, so we constrain it to larger values.
*/
- for (mdiv_idx = 15; mdiv_idx >= 2 && delta_hz != 0; mdiv_idx--) {
+ for (mdiv_idx = 15; mdiv_idx >= mdiv_min && delta_hz != 0; mdiv_idx--) {
/*
* For given ndiv and mdiv values check the
* two closest thp values.
*/
tclk = i2c->twsi_freq * (mdiv_idx + 1) * 10;
tclk *= (1 << ndiv_idx);
- thp_base = (i2c->sys_freq / (tclk * 2)) - 1;
+ if (octeon_i2c_is_otx2(to_pci_dev(i2c->dev)))
+ thp_base = (i2c->sys_freq / tclk) - 2;
+ else
+ thp_base = (i2c->sys_freq / (tclk * 2)) - 1;
for (inc = 0; inc <= 1; inc++) {
thp_idx = thp_base + inc;
if (thp_idx < 5 || thp_idx > 0xff)
continue;
- foscl = i2c->sys_freq / (2 * (thp_idx + 1));
+ if (octeon_i2c_is_otx2(to_pci_dev(i2c->dev)))
+ foscl = i2c->sys_freq / (thp_idx + 2);
+ else
+ foscl = i2c->sys_freq /
+ (2 * (thp_idx + 1));
foscl = foscl / (1 << ndiv_idx);
foscl = foscl / (mdiv_idx + 1) / 10;
diff = abs(foscl - i2c->twsi_freq);
+ /* Use it if smaller diff from target */
if (diff < delta_hz) {
delta_hz = diff;
thp = thp_idx;
diff --git a/drivers/i2c/busses/i2c-octeon-core.h b/drivers/i2c/busses/i2c-octeon-core.h
index 9bb9f64fdda0392364638ecbaafe3fab5612baf6..694c24cecb7b144c1021549d1661b040c21bb998 100644
--- a/drivers/i2c/busses/i2c-octeon-core.h
+++ b/drivers/i2c/busses/i2c-octeon-core.h
@@ -7,6 +7,7 @@
#include <linux/i2c-smbus.h>
#include <linux/io.h>
#include <linux/kernel.h>
+#include <linux/pci.h>
/* Controller command patterns */
#define SW_TWSI_V BIT_ULL(63) /* Valid bit */
@@ -98,6 +99,8 @@ struct octeon_i2c_reg_offset {
#define TWSI_INT(x) (x->roff.twsi_int)
#define SW_TWSI_EXT(x) (x->roff.sw_twsi_ext)
+#define INITIAL_DELTA_HZ 1000000
+
struct octeon_i2c {
wait_queue_head_t queue;
struct i2c_adapter adap;
@@ -211,6 +214,20 @@ static inline void octeon_i2c_write_int(struct octeon_i2c *i2c, u64 data)
octeon_i2c_writeq_flush(data, i2c->twsi_base + TWSI_INT(i2c));
}
+#define PCI_SUBSYS_DEVID_9XXX 0xB
+/**
+ * octeon_i2c_is_otx2 - check for chip ID
+ * @pdev: PCI dev structure
+ *
+ * Returns TRUE if OcteonTX2, FALSE otherwise.
+ */
+static inline bool octeon_i2c_is_otx2(struct pci_dev *pdev)
+{
+ u32 chip_id = (pdev->subsystem_device >> 12) & 0xF;
+
+ return (chip_id == PCI_SUBSYS_DEVID_9XXX);
+}
+
/* Prototypes */
irqreturn_t octeon_i2c_isr(int irq, void *dev_id);
int octeon_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num);
diff --git a/drivers/i2c/busses/i2c-thunderx-pcidrv.c b/drivers/i2c/busses/i2c-thunderx-pcidrv.c
index a77cd86fe75ed7401bc041b27c651b9fedf67285..75569774003857dc984e8540ef8f4d1bb084cfb0 100644
--- a/drivers/i2c/busses/i2c-thunderx-pcidrv.c
+++ b/drivers/i2c/busses/i2c-thunderx-pcidrv.c
@@ -28,6 +28,7 @@
#define PCI_DEVICE_ID_THUNDER_TWSI 0xa012
#define SYS_FREQ_DEFAULT 700000000
+#define OTX2_REF_FREQ_DEFAULT 100000000
#define TWSI_INT_ENA_W1C 0x1028
#define TWSI_INT_ENA_W1S 0x1030
@@ -205,6 +206,12 @@ static int thunder_i2c_probe_pci(struct pci_dev *pdev,
if (ret)
goto error;
+ /*
+ * For OcteonTX2 chips, set reference frequency to 100MHz
+ * as refclk_src in TWSI_MODE register defaults to 100MHz.
+ */
+ if (octeon_i2c_is_otx2(pdev))
+ i2c->sys_freq = OTX2_REF_FREQ_DEFAULT;
octeon_i2c_set_clock(i2c);
i2c->adap = thunderx_i2c_ops;
--
2.42.0
Powered by blists - more mailing lists