linux-kernel - [PATCH v3 8/8] ARM: dts: microchip: sama5d2_xplained: Add power-supply property for sdmmc0 node

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20240206120322.88907-9-mihai.sain@microchip.com>
Date: Tue, 6 Feb 2024 14:03:22 +0200
From: Mihai Sain <mihai.sain@...rochip.com>
To: <claudiu.beznea@...on.dev>, <robh+dt@...nel.org>,
	<krzysztof.kozlowski+dt@...aro.org>, <conor+dt@...nel.org>,
	<nicolas.ferre@...rochip.com>, <alexandre.belloni@...tlin.com>,
	<devicetree@...r.kernel.org>, <linux-arm-kernel@...ts.infradead.org>,
	<linux-kernel@...r.kernel.org>
CC: Mihai Sain <mihai.sain@...rochip.com>
Subject: [PATCH v3 8/8] ARM: dts: microchip: sama5d2_xplained: Add power-supply property for sdmmc0 node

The sdmmc0 controller is powered from 3.3V regulator.
Add vmmc-supply and vqmmc-supply properties to sdmmc0 node.
The sdmmc controller from SAMA5D2 MPU has support for
IO voltage signaling/switching required by the UHS sd-card.
In order to avoid the issues from the tuning procedure required by
the UHS cards, keep the vqmmc at 3V3 to use the sd high-speed mode.

Signed-off-by: Mihai Sain <mihai.sain@...rochip.com>
---
 arch/arm/boot/dts/microchip/at91-sama5d2_xplained.dts | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/microchip/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/microchip/at91-sama5d2_xplained.dts
index 6680031387e8..9b7e56790a5a 100644
--- a/arch/arm/boot/dts/microchip/at91-sama5d2_xplained.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama5d2_xplained.dts
@@ -67,6 +67,8 @@ sdmmc0: sdio-host@...00000 {
 			pinctrl-0 = <&pinctrl_sdmmc0_default>;
 			non-removable;
 			mmc-ddr-3_3v;
+			vmmc-supply = <&vdd_3v3_reg>;
+			vqmmc-supply = <&vdd_3v3_reg>;
 			status = "okay";
 		};
 
-- 
2.43.0