linux-kernel - [PATCH v4 9/9] drm/mediatek: dsi: Use mipi_dsi_pixel_format_to

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20240206120748.136610-10-angelogioacchino.delregno@collabora.com>
Date: Tue,  6 Feb 2024 13:07:48 +0100
From: AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>
To: chunkuang.hu@...nel.org
Cc: fshao@...omium.org,
	p.zabel@...gutronix.de,
	airlied@...il.com,
	daniel@...ll.ch,
	matthias.bgg@...il.com,
	angelogioacchino.delregno@...labora.com,
	dri-devel@...ts.freedesktop.org,
	linux-mediatek@...ts.infradead.org,
	linux-kernel@...r.kernel.org,
	linux-arm-kernel@...ts.infradead.org,
	kernel@...labora.com
Subject: [PATCH v4 9/9] drm/mediatek: dsi: Use mipi_dsi_pixel_format_to_bpp() helper function

Instead of open coding, use the mipi_dsi_pixel_format_to_bpp() helper
function from drm_mipi_dsi.h in mtk_dsi_poweron() and for validation
in mtk_dsi_bridge_mode_valid().

Note that this function changes the behavior of this driver: previously,
in case of unknown formats, it would (wrongly) assume that it should
account for a 24-bits format - now it will return an error and refuse
to set clocks and/or enable the DSI.

This is done because setting the wrong data rate will only produce a
garbage output that the display will misinterpret both because this
driver doesn't actually provide any extra-spec format support and/or
because the data rate (hence, the HS clock) will be wrong.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>
---
 drivers/gpu/drm/mediatek/mtk_dsi.c | 26 +++++++++-----------------
 1 file changed, 9 insertions(+), 17 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
index 545c5cc071d9..d844a0500e2b 100644
--- a/drivers/gpu/drm/mediatek/mtk_dsi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
@@ -598,19 +598,12 @@ static int mtk_dsi_poweron(struct mtk_dsi *dsi)
 	if (++dsi->refcount != 1)
 		return 0;
 
-	switch (dsi->format) {
-	case MIPI_DSI_FMT_RGB565:
-		bit_per_pixel = 16;
-		break;
-	case MIPI_DSI_FMT_RGB666_PACKED:
-		bit_per_pixel = 18;
-		break;
-	case MIPI_DSI_FMT_RGB666:
-	case MIPI_DSI_FMT_RGB888:
-	default:
-		bit_per_pixel = 24;
-		break;
+	ret = mipi_dsi_pixel_format_to_bpp(dsi->format);
+	if (ret < 0) {
+		dev_err(dev, "Unknown MIPI DSI format %d\n", dsi->format);
+		return ret;
 	}
+	bit_per_pixel = ret;
 
 	dsi->data_rate = DIV_ROUND_UP_ULL(dsi->vm.pixelclock * bit_per_pixel,
 					  dsi->lanes);
@@ -793,12 +786,11 @@ mtk_dsi_bridge_mode_valid(struct drm_bridge *bridge,
 			  const struct drm_display_mode *mode)
 {
 	struct mtk_dsi *dsi = bridge_to_dsi(bridge);
-	u32 bpp;
+	int bpp;
 
-	if (dsi->format == MIPI_DSI_FMT_RGB565)
-		bpp = 16;
-	else
-		bpp = 24;
+	bpp = mipi_dsi_pixel_format_to_bpp(dsi->format);
+	if (bpp < 0)
+		return MODE_ERROR;
 
 	if (mode->clock * bpp / dsi->lanes > 1500000)
 		return MODE_CLOCK_HIGH;
-- 
2.43.0