| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <87jznhypxy.fsf@yhuang6-desk2.ccr.corp.intel.com>
Date: Wed, 07 Feb 2024 10:21:29 +0800
From: "Huang, Ying" <ying.huang@...el.com>
To: Peng Zhang <zhangpeng362@...wei.com>
Cc: <linux-mm@...ck.org>, <linux-kernel@...r.kernel.org>,
<akpm@...ux-foundation.org>, <willy@...radead.org>,
<fengwei.yin@...el.com>, <aneesh.kumar@...ux.ibm.com>,
<shy828301@...il.com>, <hughd@...gle.com>, <david@...hat.com>,
<wangkefeng.wang@...wei.com>
Subject: Re: [PATCH v2] filemap: avoid unnecessary major faults in
filemap_fault()
Peng Zhang <zhangpeng362@...wei.com> writes:
> From: ZhangPeng <zhangpeng362@...wei.com>
>
> The major fault occurred when using mlockall(MCL_CURRENT | MCL_FUTURE)
> in application, which leading to an unexpected performance issue[1].
>
> This caused by temporarily cleared PTE during a read+clear/modify/write
> update of the PTE, eg, do_numa_page()/change_pte_range().
>
> For the data segment of the user-mode program, the global variable area
> is a private mapping. After the pagecache is loaded, the private anonymous
> page is generated after the COW is triggered. Mlockall can lock COW pages
> (anonymous pages), but the original file pages cannot be locked and may
> be reclaimed. If the global variable (private anon page) is accessed when
> vmf->pte is zeroed in numa fault, a file page fault will be triggered.
>
> At this time, the original private file page may have been reclaimed.
> If the page cache is not available at this time, a major fault will be
> triggered and the file will be read, causing additional overhead.
>
> Fix this by rechecking the PTE without acquiring PTL in filemap_fault()
> before triggering a major fault.
>
> Testing file anonymous page read and write page fault performance in ext4
> and ramdisk using will-it-scale[2] on a x86 physical machine. The data
> is the average change compared with the mainline after the patch is
> applied. The test results are within the range of fluctuation, and there
> is no obvious difference. The test results are as follows:
You still claim that there's no difference in the test results. If so,
why do you implement the patch? IMHO, you need to prove your patch can
improve the performance in some cases.
> processes processes_idle threads threads_idle
> ext4 private file write: -1.14% -0.08% -1.87% 0.13%
> ext4 shared file write: 0.14% -0.53% 2.88% -0.77%
> ext4 private file read: 0.03% -0.65% -0.51% -0.08%
> tmpfs private file write: -0.34% -0.11% 0.20% 0.15%
> tmpfs shared file write: 0.96% 0.10% 2.78% -0.34%
> ramdisk private file write: -1.21% -0.21% -1.12% 0.11%
> ramdisk private file read: 0.00% -0.68% -0.33% -0.02%
>
> [1] https://lore.kernel.org/linux-mm/9e62fd9a-bee0-52bf-50a7-498fa17434ee@huawei.com/
> [2] https://github.com/antonblanchard/will-it-scale/
>
> Suggested-by: "Huang, Ying" <ying.huang@...el.com>
> Suggested-by: Yin Fengwei <fengwei.yin@...el.com>
> Signed-off-by: ZhangPeng <zhangpeng362@...wei.com>
> Signed-off-by: Kefeng Wang <wangkefeng.wang@...wei.com>
> ---
> v1->v2:
> - Add more test results per Huang, Ying
> - Add more comments before check PTE per Huang, Ying, David Hildenbrand
> and Yin Fengwei
> - Change pte_offset_map_nolock to pte_offset_map as the ptl lock won't
> be used
>
> RFC->v1:
> - Add error handling when ptep == NULL per Huang, Ying and Matthew
> Wilcox
> - Check the PTE without acquiring PTL in filemap_fault(), suggested by
> Huang, Ying and Yin Fengwei
> - Add pmd_none() check before PTE map
> - Update commit message and add performance test information
>
> mm/filemap.c | 34 ++++++++++++++++++++++++++++++++++
> 1 file changed, 34 insertions(+)
>
> diff --git a/mm/filemap.c b/mm/filemap.c
> index 142864338ca4..a2c1a98bc771 100644
> --- a/mm/filemap.c
> +++ b/mm/filemap.c
> @@ -3238,6 +3238,40 @@ vm_fault_t filemap_fault(struct vm_fault *vmf)
> mapping_locked = true;
> }
> } else {
> + if (!pmd_none(*vmf->pmd)) {
> + pte_t *ptep;
> +
> + ptep = pte_offset_map(vmf->pmd, vmf->address);
> + if (unlikely(!ptep))
> + return VM_FAULT_NOPAGE;
> + /*
> + * Recheck PTE as the PTE can be cleared temporarily
> + * during a read+clear/modify/write update of the PTE,
> + * eg, do_numa_page()/change_pte_range(). This will
> + * trigger a major fault, even if we use mlockall,
> + * which may affect performance.
> + * We don't hold PTL here as acquiring PTL hurts
> + * performance. So the check is still racy, but
> + * the race window seems small enough.
> + *
> + * If we lose the race during the check, the page_fault
> + * will be triggered. Butthe page table entry lock
> + * still make sure the correctness:
> + * - If the page cache is not reclaimed, the page_fault
> + * will work like the page fault was served already
> + * and bail out.
> + * - If the page cache is reclaimed, the major fault
> + * will be triggered, page cache is filled,
> + * page_fault also work like the page fault was
> + * served already and bail out.
> + */
IMHO, this is too long. It can be shorten to like,
If we lose the race, major fault may be triggered unnecessary. This
hurts performance but not functionality.
> + if (unlikely(!pte_none(ptep_get_lockless(ptep))))
> + ret = VM_FAULT_NOPAGE;
> + pte_unmap(ptep);
> + if (unlikely(ret))
> + return ret;
> + }
> +
> /* No page in the page cache at all */
> count_vm_event(PGMAJFAULT);
> count_memcg_event_mm(vmf->vma->vm_mm, PGMAJFAULT);
--
Best Regards,
Huang, Ying
Powered by blists - more mailing lists