linux-kernel - Re: [PATCH v1] PM: sleep: Restore asynchronous device resume optimization

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <b4ceab79-3208-419b-9a79-f34540db3f70@samsung.com>
Date: Wed, 7 Feb 2024 22:30:58 +0100
From: Marek Szyprowski <m.szyprowski@...sung.com>
To: Tejun Heo <tj@...nel.org>
Cc: "Rafael J. Wysocki" <rafael@...nel.org>, "Rafael J. Wysocki"
	<rjw@...ysocki.net>, Linux PM <linux-pm@...r.kernel.org>, Ulf Hansson
	<ulf.hansson@...aro.org>, Nathan Chancellor <nathan@...nel.org>, LKML
	<linux-kernel@...r.kernel.org>, Stanislaw Gruszka
	<stanislaw.gruszka@...ux.intel.com>, Lai Jiangshan <jiangshanlai@...il.com>,
	Naohiro.Aota@....com, kernel-team@...a.com
Subject: Re: [PATCH v1] PM: sleep: Restore asynchronous device resume
 optimization

On 07.02.2024 20:48, Tejun Heo wrote:
> Hello,
>
> I couldn't reproduce effective max_active being pushed down to min_active
> across suspend/resume cycles on x86. There gotta be something different.
>
> - Can you please apply the following patch along with the WQ_DFL_MIN_ACTIVE
>    bump, go through suspend/resume once and report the dmesg?

Here is the relevant part of the log:

PM: suspend entry (deep)
Filesystems sync: 0.004 seconds
Freezing user space processes
Freezing user space processes completed (elapsed 0.002 seconds)
OOM killer disabled.
Freezing remaining freezable tasks
Freezing remaining freezable tasks completed (elapsed 0.002 seconds)
dwc2 12480000.usb: suspending usb gadget g_ether
dwc2 12480000.usb: new device is full-speed
smsc95xx 1-2:1.0 eth0: entering SUSPEND2 mode
wake enabled for irq 97 (gpx3-2)
usb3503 0-0008: switched to STANDBY mode
wake enabled for irq 124 (gpx1-3)
samsung-pinctrl 11000000.pinctrl: Setting external wakeup interrupt 
mask: 0xfbfff7ff
Disabling non-boot CPUs ...
XXX wq_update_node_max_active: wq=events_unbound off_cpu=1 total=3 
range=[32, 512] node[0] node_cpus=3 max=512
XXX wq_update_node_max_active: wq=events_unbound off_cpu=2 total=2 
range=[32, 512] node[0] node_cpus=2 max=512
XXX wq_update_node_max_active: wq=events_unbound off_cpu=3 total=1 
range=[32, 512] node[0] node_cpus=1 max=512
Enabling non-boot CPUs ...
XXX wq_update_node_max_active: wq=events_unbound off_cpu=-1 total=2 
range=[32, 512] node[0] node_cpus=2 max=512
CPU1 is up
XXX wq_update_node_max_active: wq=events_unbound off_cpu=-1 total=3 
range=[32, 512] node[0] node_cpus=3 max=512
CPU2 is up
XXX wq_update_node_max_active: wq=events_unbound off_cpu=-1 total=4 
range=[32, 512] node[0] node_cpus=4 max=512
CPU3 is up
s3c-i2c 138e0000.i2c: slave address 0x00
s3c-i2c 138e0000.i2c: bus frequency set to 97 KHz
s3c-i2c 13870000.i2c: slave address 0x00
s3c-i2c 13870000.i2c: bus frequency set to 97 KHz
s3c-i2c 13860000.i2c: slave address 0x00
s3c-i2c 13860000.i2c: bus frequency set to 390 KHz
s3c-i2c 13880000.i2c: slave address 0x00
s3c-i2c 13880000.i2c: bus frequency set to 97 KHz
s3c2410-wdt 10060000.watchdog: watchdog disabled
wake disabled for irq 124 (gpx1-3)
s3c-rtc 10070000.rtc: rtc disabled, re-enabling
usb3503 0-0008: switched to HUB mode
wake disabled for irq 97 (gpx3-2)
usb usb1: root hub lost power or was reset
usb 1-2: reset high-speed USB device number 2 using exynos-ehci
smsc95xx 1-2:1.0 eth0: Link is Down
dwc2 12480000.usb: resuming usb gadget g_ether
usb 1-3: reset high-speed USB device number 3 using exynos-ehci
usb 1-3.1: reset high-speed USB device number 4 using exynos-ehci
OOM killer enabled.
Restarting tasks ... done.
random: crng reseeded on system resumption
PM: suspend exit

> ...

Best regards
-- 
Marek Szyprowski, PhD
Samsung R&D Institute Poland