| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20240207090742.23857-1-Jingqi.liu@intel.com>
Date: Wed, 7 Feb 2024 17:07:42 +0800
From: Jingqi Liu <Jingqi.liu@...el.com>
To: iommu@...ts.linux.dev,
Lu Baolu <baolu.lu@...ux.intel.com>,
Tian Kevin <kevin.tian@...el.com>,
Joerg Roedel <joro@...tes.org>,
Will Deacon <will@...nel.org>,
Robin Murphy <robin.murphy@....com>
Cc: linux-kernel@...r.kernel.org,
Jingqi Liu <Jingqi.liu@...el.com>
Subject: [PACTH v3] Documentation: iommu/vt-d: Add the document for Intel IOMMU debugfs
This document guides users to dump the Intel IOMMU internals by debugfs.
Signed-off-by: Jingqi Liu <Jingqi.liu@...el.com>
---
Change log:
v3:
- Add this change log per Baolu's comments.
v2: http://lore.kernel.org/lkml/20240126064704.14292-1-Jingqi.liu@intel.com
- Remove the use of private data field according to VT-d specification
changes in v4.0.
v1: http://lore.kernel.org/lkml/20231220132519.11077-1-Jingqi.liu@intel.com
---
Documentation/ABI/testing/debugfs-intel-iommu | 276 ++++++++++++++++++
1 file changed, 276 insertions(+)
create mode 100644 Documentation/ABI/testing/debugfs-intel-iommu
diff --git a/Documentation/ABI/testing/debugfs-intel-iommu b/Documentation/ABI/testing/debugfs-intel-iommu
new file mode 100644
index 000000000000..2ab8464504a9
--- /dev/null
+++ b/Documentation/ABI/testing/debugfs-intel-iommu
@@ -0,0 +1,276 @@
+What: /sys/kernel/debug/iommu/intel/iommu_regset
+Date: December 2023
+Contact: Jingqi Liu <Jingqi.liu@...el.com>
+Description:
+ This file dumps all the register contents for each IOMMU device.
+
+ Example in Kabylake:
+
+ ::
+
+ $ sudo cat /sys/kernel/debug/iommu/intel/iommu_regset
+
+ IOMMU: dmar0 Register Base Address: 26be37000
+
+ Name Offset Contents
+ VER 0x00 0x0000000000000010
+ GCMD 0x18 0x0000000000000000
+ GSTS 0x1c 0x00000000c7000000
+ FSTS 0x34 0x0000000000000000
+ FECTL 0x38 0x0000000000000000
+
+ [...]
+
+ IOMMU: dmar1 Register Base Address: fed90000
+
+ Name Offset Contents
+ VER 0x00 0x0000000000000010
+ GCMD 0x18 0x0000000000000000
+ GSTS 0x1c 0x00000000c7000000
+ FSTS 0x34 0x0000000000000000
+ FECTL 0x38 0x0000000000000000
+
+ [...]
+
+ IOMMU: dmar2 Register Base Address: fed91000
+
+ Name Offset Contents
+ VER 0x00 0x0000000000000010
+ GCMD 0x18 0x0000000000000000
+ GSTS 0x1c 0x00000000c7000000
+ FSTS 0x34 0x0000000000000000
+ FECTL 0x38 0x0000000000000000
+
+ [...]
+
+What: /sys/kernel/debug/iommu/intel/ir_translation_struct
+Date: December 2023
+Contact: Jingqi Liu <Jingqi.liu@...el.com>
+Description:
+ This file dumps the table entries for Interrupt
+ remapping and Interrupt posting.
+
+ Example in Kabylake:
+
+ ::
+
+ $ sudo cat /sys/kernel/debug/iommu/intel/ir_translation_struct
+
+ Remapped Interrupt supported on IOMMU: dmar0
+ IR table address:100900000
+
+ Entry SrcID DstID Vct IRTE_high IRTE_low
+ 0 00:0a.0 00000080 24 0000000000040050 000000800024000d
+ 1 00:0a.0 00000001 ef 0000000000040050 0000000100ef000d
+
+ Remapped Interrupt supported on IOMMU: dmar1
+ IR table address:100300000
+ Entry SrcID DstID Vct IRTE_high IRTE_low
+ 0 00:02.0 00000002 26 0000000000040010 000000020026000d
+
+ [...]
+
+ ****
+
+ Posted Interrupt supported on IOMMU: dmar0
+ IR table address:100900000
+ Entry SrcID PDA_high PDA_low Vct IRTE_high IRTE_low
+
+What: /sys/kernel/debug/iommu/intel/dmar_translation_struct
+Date: December 2023
+Contact: Jingqi Liu <Jingqi.liu@...el.com>
+Description:
+ This file dumps Intel IOMMU DMA remapping tables, such
+ as root table, context table, PASID directory and PASID
+ table entries in debugfs. For legacy mode, it doesn't
+ support PASID, and hence PASID field is defaulted to
+ '-1' and other PASID related fields are invalid.
+
+ Example in Kabylake:
+
+ ::
+
+ $ sudo cat /sys/kernel/debug/iommu/intel/dmar_translation_struct
+
+ IOMMU dmar1: Root Table Address: 0x103027000
+ B.D.F Root_entry
+ 00:02.0 0x0000000000000000:0x000000010303e001
+
+ Context_entry
+ 0x0000000000000102:0x000000010303f005
+
+ PASID PASID_table_entry
+ -1 0x0000000000000000:0x0000000000000000:0x0000000000000000
+
+ IOMMU dmar0: Root Table Address: 0x103028000
+ B.D.F Root_entry
+ 00:0a.0 0x0000000000000000:0x00000001038a7001
+
+ Context_entry
+ 0x0000000000000000:0x0000000103220e7d
+
+ PASID PASID_table_entry
+ 0 0x0000000000000000:0x0000000000800002:0x00000001038a5089
+
+ [...]
+
+What: /sys/kernel/debug/iommu/intel/invalidation_queue
+Date: December 2023
+Contact: Jingqi Liu <Jingqi.liu@...el.com>
+Description:
+ This file exports invalidation queue internals of each
+ IOMMU device.
+
+ Example in Kabylake:
+
+ ::
+
+ $ sudo cat /sys/kernel/debug/iommu/intel/invalidation_queue
+
+ Invalidation queue on IOMMU: dmar0
+ Base: 0x10022e000 Head: 20 Tail: 20
+ Index qw0 qw1 qw2
+ 0 0000000000000014 0000000000000000 0000000000000000
+ 1 0000000200000025 0000000100059c04 0000000000000000
+ 2 0000000000000014 0000000000000000 0000000000000000
+
+ qw3 status
+ 0000000000000000 0000000000000000
+ 0000000000000000 0000000000000000
+ 0000000000000000 0000000000000000
+
+ [...]
+
+ Invalidation queue on IOMMU: dmar1
+ Base: 0x10026e000 Head: 32 Tail: 32
+ Index qw0 qw1 status
+ 0 0000000000000004 0000000000000000 0000000000000000
+ 1 0000000200000025 0000000100059804 0000000000000000
+ 2 0000000000000011 0000000000000000 0000000000000000
+
+ [...]
+
+What: /sys/kernel/debug/iommu/intel/dmar_perf_latency
+Date: December 2023
+Contact: Jingqi Liu <Jingqi.liu@...el.com>
+Description:
+ This file is used to control and show counts of
+ execution time ranges for various types per DMAR.
+
+ Firstly, write a value to
+ /sys/kernel/debug/iommu/intel/dmar_perf_latency
+ to enable sampling.
+
+ The possible values are as follows:
+
+ * 0 - disable sampling all latency data
+
+ * 1 - enable sampling IOTLB invalidation latency data
+
+ * 2 - enable sampling devTLB invalidation latency data
+
+ * 3 - enable sampling intr entry cache invalidation latency data
+
+ Next, read /sys/kernel/debug/iommu/intel/dmar_perf_latency gives
+ a snapshot of sampling result of all enabled monitors.
+
+ Examples in Kabylake:
+
+ ::
+
+ 1) Disable sampling all latency data:
+
+ $ sudo echo 0 > /sys/kernel/debug/iommu/intel/dmar_perf_latency
+
+ 2) Enable sampling IOTLB invalidation latency data
+
+ $ sudo echo 1 > /sys/kernel/debug/iommu/intel/dmar_perf_latency
+
+ $ sudo cat /sys/kernel/debug/iommu/intel/dmar_perf_latency
+
+ IOMMU: dmar0 Register Base Address: 26be37000
+ <0.1us 0.1us-1us 1us-10us 10us-100us 100us-1ms
+ inv_iotlb 0 0 0 0 0
+
+ 1ms-10ms >=10ms min(us) max(us) average(us)
+ inv_iotlb 0 0 0 0 0
+
+ [...]
+
+ IOMMU: dmar2 Register Base Address: fed91000
+ <0.1us 0.1us-1us 1us-10us 10us-100us 100us-1ms
+ inv_iotlb 0 0 18 0 0
+
+ 1ms-10ms >=10ms min(us) max(us) average(us)
+ inv_iotlb 0 0 2 2 2
+
+ 3) Enable sampling devTLB invalidation latency data
+
+ $ sudo echo 2 > /sys/kernel/debug/iommu/intel/dmar_perf_latency
+
+ $ sudo cat /sys/kernel/debug/iommu/intel/dmar_perf_latency
+
+ IOMMU: dmar0 Register Base Address: 26be37000
+ <0.1us 0.1us-1us 1us-10us 10us-100us 100us-1ms
+ inv_devtlb 0 0 0 0 0
+
+ >=10ms min(us) max(us) average(us)
+ inv_devtlb 0 0 0 0
+
+ [...]
+
+What: /sys/kernel/debug/iommu/intel/<bdf>/domain_translation_struct
+Date: December 2023
+Contact: Jingqi Liu <Jingqi.liu@...el.com>
+Description:
+ This file dumps a specified page table of Intel IOMMU
+ in legacy mode or scalable mode.
+
+ For a device that only supports legacy mode, dump its
+ page table by the debugfs file in the debugfs device
+ directory. e.g.
+ /sys/kernel/debug/iommu/intel/0000:00:02.0/domain_translation_struct.
+
+ For a device that supports scalable mode, dump the
+ page table of specified pasid by the debugfs file in
+ the debugfs pasid directory. e.g.
+ /sys/kernel/debug/iommu/intel/0000:00:02.0/1/domain_translation_struct.
+
+ Examples in Kabylake:
+
+ ::
+
+ 1) Dump the page table of device "0000:00:02.0" that only supports legacy mode.
+
+ $ sudo cat /sys/kernel/debug/iommu/intel/0000:00:02.0/domain_translation_struct
+
+ Device 0000:00:02.0 @0x1017f8000
+ IOVA_PFN PML5E PML4E
+ 0x000000008d800 | 0x0000000000000000 0x00000001017f9003
+ 0x000000008d801 | 0x0000000000000000 0x00000001017f9003
+ 0x000000008d802 | 0x0000000000000000 0x00000001017f9003
+
+ PDPE PDE PTE
+ 0x00000001017fa003 0x00000001017fb003 0x000000008d800003
+ 0x00000001017fa003 0x00000001017fb003 0x000000008d801003
+ 0x00000001017fa003 0x00000001017fb003 0x000000008d802003
+
+ [...]
+
+ 2) Dump the page table of device "0000:00:0a.0" with PASID "1" that
+ supports scalable mode.
+
+ $ sudo cat /sys/kernel/debug/iommu/intel/0000:00:0a.0/1/domain_translation_struct
+
+ Device 0000:00:0a.0 with pasid 1 @0x10c112000
+ IOVA_PFN PML5E PML4E
+ 0x0000000000000 | 0x0000000000000000 0x000000010df93003
+ 0x0000000000001 | 0x0000000000000000 0x000000010df93003
+ 0x0000000000002 | 0x0000000000000000 0x000000010df93003
+
+ PDPE PDE PTE
+ 0x0000000106ae6003 0x0000000104b38003 0x0000000147c00803
+ 0x0000000106ae6003 0x0000000104b38003 0x0000000147c01803
+ 0x0000000106ae6003 0x0000000104b38003 0x0000000147c02803
+
+ [...]
--
2.21.3
Powered by blists - more mailing lists