[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240207-enable_pcie-v1-1-b684afa6371c@quicinc.com>
Date: Wed, 7 Feb 2024 16:11:49 +0530
From: Krishna chaitanya chundru <quic_krichai@...cinc.com>
To: Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio
<konrad.dybcio@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
"Krzysztof
Kozlowski" <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley
<conor+dt@...nel.org>
CC: <linux-arm-msm@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <quic_vbadigan@...cinc.com>,
<quic_ramkri@...cinc.com>, <quic_nitegupt@...cinc.com>,
<quic_skananth@...cinc.com>, <quic_parass@...cinc.com>,
"Krishna chaitanya
chundru" <quic_krichai@...cinc.com>
Subject: [PATCH] arm64: dts: qcom: qcs6490-rb3gen2: Add PCIe nodes
Enable PCIe1 controller and its corresponding PHY nodes on
qcs6490-rb3g2 platform.
PCIe switch is connected to PCIe1, PCIe switch has multiple endpoints
connected. For each endpoint a unique BDF will be assigned and should
assign unique smmu id. So for each BDF add smmu id.
Signed-off-by: Krishna chaitanya chundru <quic_krichai@...cinc.com>
---
arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts | 42 ++++++++++++++++++++++++++++
1 file changed, 42 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
index 8bb7d13d85f6..0082a3399453 100644
--- a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
+++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
@@ -413,6 +413,32 @@ vreg_bob_3p296: bob {
};
};
+&pcie1 {
+ perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
+
+ pinctrl-0 = <&pcie1_reset_n>, <&pcie1_wake_n>;
+ pinctrl-names = "default";
+
+ iommu-map = <0x0 &apps_smmu 0x1c80 0x1>,
+ <0x100 &apps_smmu 0x1c81 0x1>,
+ <0x208 &apps_smmu 0x1c84 0x1>,
+ <0x210 &apps_smmu 0x1c85 0x1>,
+ <0x218 &apps_smmu 0x1c86 0x1>,
+ <0x300 &apps_smmu 0x1c87 0x1>,
+ <0x400 &apps_smmu 0x1c88 0x1>,
+ <0x500 &apps_smmu 0x1c89 0x1>,
+ <0x501 &apps_smmu 0x1c90 0x1>;
+
+ status = "okay";
+};
+
+&pcie1_phy {
+ vdda-phy-supply = <&vreg_l10c_0p88>;
+ vdda-pll-supply = <&vreg_l6b_1p2>;
+
+ status = "okay";
+};
+
&qupv3_id_0 {
status = "okay";
};
@@ -420,6 +446,22 @@ &qupv3_id_0 {
&tlmm {
gpio-reserved-ranges = <32 2>, /* ADSP */
<48 4>; /* NFC */
+
+ pcie1_reset_n: pcie1-reset-n-state {
+ pins = "gpio2";
+ function = "gpio";
+ drive-strength = <16>;
+ output-low;
+ bias-disable;
+ };
+
+ pcie1_wake_n: pcie1-wake-n-state {
+ pins = "gpio3";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
};
&uart5 {
---
base-commit: 70d201a40823acba23899342d62bc2644051ad2e
change-id: 20240207-enable_pcie-95b1d6612b27
Best regards,
--
Krishna chaitanya chundru <quic_krichai@...cinc.com>
Powered by blists - more mailing lists