lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date: Wed, 7 Feb 2024 14:28:32 +0300
From: Sergei Shtylyov <sergei.shtylyov@...il.com>
To: "Andrey Jr. Melnikov" <temnota.am@...il.com>, linux-ide@...r.kernel.org,
 linux-kernel@...r.kernel.org
Cc: dlemoal@...nel.org, hdegoede@...hat.com
Subject: Re: [PATCH] ahci: asm1064: correct count of reported ports

On 2/7/24 12:58 PM, Andrey Jr. Melnikov wrote:

> The ASM1064 SATA host controller always reports wrongly,
> that it has 24 ports. But in reality, it only has four ports.
> 
> before:
> ahci 0000:04:00.0: SSS flag set, parallel bus scan disabled
> ahci 0000:04:00.0: AHCI 0001.0301 32 slots 24 ports 6 Gbps 0xffff0f impl SATA mode
> ahci 0000:04:00.0: flags: 64bit ncq sntf stag pm led only pio sxs deso sadm sds apst 
> 
> after:
> ahci 0000:04:00.0: ASM1064 has only four ports
> ahci 0000:04:00.0: forcing port_map 0xffff0f -> 0xf
> ahci 0000:04:00.0: SSS flag set, parallel bus scan disabled
> ahci 0000:04:00.0: AHCI 0001.0301 32 slots 24 ports 6 Gbps 0xf impl SATA mode
> ahci 0000:04:00.0: flags: 64bit ncq sntf stag pm led only pio sxs deso sadm sds apst 
> 
> 
> Signed-off-by: Andrey Jr. Melnikov <temnota.am@...il.com>
> 
> diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
> index da2e74fce2d9..ec30d8330d16 100644
> --- a/drivers/ata/ahci.c
> +++ b/drivers/ata/ahci.c
> @@ -671,9 +671,14 @@ MODULE_PARM_DESC(mobile_lpm_policy, "Default LPM policy for mobile chipsets");
>  static void ahci_pci_save_initial_config(struct pci_dev *pdev,
>  					 struct ahci_host_priv *hpriv)
>  {
> -	if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA && pdev->device == 0x1166) {
> -		dev_info(&pdev->dev, "ASM1166 has only six ports\n");
> -		hpriv->saved_port_map = 0x3f;
> +	if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA) {
> +		if (pdev->device == 0x1166) {

   Maybe *switch* instead?

> +			dev_info(&pdev->dev, "ASM1166 has only six ports\n");
> +			hpriv->saved_port_map = 0x3f;
> +		} else if (pdev->device == 0x1064) {
> +			dev_info(&pdev->dev, "ASM1064 has only four ports\n");
> +			hpriv->saved_port_map = 0xf;
> +		}
>  	}
>  
>  	if (pdev->vendor == PCI_VENDOR_ID_JMICRON && pdev->device == 0x2361) {

MBR, Sergey

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ