[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <ZcUcRlcQmQG4s42k@smile.fi.intel.com>
Date: Thu, 8 Feb 2024 20:24:06 +0200
From: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
To: Lee Jones <lee@...nel.org>
Cc: Flavio Suligoi <f.suligoi@...m.it>, dri-devel@...ts.freedesktop.org,
linux-fbdev@...r.kernel.org, linux-kernel@...r.kernel.org,
Daniel Thompson <daniel.thompson@...aro.org>,
Jingoo Han <jingoohan1@...il.com>, Helge Deller <deller@....de>
Subject: Re: [PATCH v2 0/3] backlight: mp3309c: Allow to use on non-OF
platforms
On Thu, Feb 08, 2024 at 06:14:55PM +0000, Lee Jones wrote:
> On Thu, 08 Feb 2024, Andy Shevchenko wrote:
> > On Thu, Feb 08, 2024 at 05:39:46PM +0000, Lee Jones wrote:
> > > On Thu, 08 Feb 2024, Andy Shevchenko wrote:
> > > > On Thu, Feb 08, 2024 at 11:34:25AM +0000, Lee Jones wrote:
> > > > > On Thu, 01 Feb 2024, Andy Shevchenko wrote:
..
> > > > > > backlight: mp3309c: Utilise temporary variable for struct device
> > > >
> > > > (1)
> > > >
> > > > > Set no longer applies. Please rebase, thanks.
> > > >
> > > > I got a contradictory messages:
> > > > 1) email that says that all had been applied;
> > > > 2) this email (that tells the complete opposite);
> > > > 3) the repository where the first two were applied.
> > > >
> > > > While you can amend your scripts, I think I need to rebase only the last patch
> > >
> > > This is what I assume happened:
> > >
> > > 1. Attempted to apply the set (as a set)
> > > 2. 2 commits applied cleanly
> > > 3. The final commit conflicted
> >
> > Which is really strange. I have just applied (with b4) on top of your changes
> > and no complains so far.
> >
> > $ git am ./v2_20240201_andriy_shevchenko_backlight_mp3309c_allow_to_use_on_non_of_platforms.mbx
> > Applying: backlight: mp3309c: Make use of device properties
> > Applying: backlight: mp3309c: use dev_err_probe() instead of dev_err()
> > Applying: backlight: mp3309c: Utilise temporary variable for struct device
> >
> > Can you show what b4 tells you about this?
>
> Fetching patch(es)
> Analyzing 14 messages in the thread
> Checking attestation on all messages, may take a moment...
> ---
> ✓ [PATCH v2 1/3] backlight: mp3309c: Make use of device properties
> + Reviewed-by: Daniel Thompson <daniel.thompson@...aro.org> (✓ DKIM/linaro.org)
> + Link: https://lore.kernel.org/r/20240201151537.367218-2-andriy.shevchenko@linux.intel.com
> + Signed-off-by: Lee Jones <lee@...nel.org>
> ✓ [PATCH v2 2/3] backlight: mp3309c: use dev_err_probe() instead of dev_err()
> + Tested-by: Flavio Suligoi <f.suligoi@...m.it> (✗ DKIM/asem.it)
> + Reviewed-by: Daniel Thompson <daniel.thompson@...aro.org> (✓ DKIM/linaro.org)
> + Link: https://lore.kernel.org/r/20240201151537.367218-3-andriy.shevchenko@linux.intel.com
> + Signed-off-by: Lee Jones <lee@...nel.org>
> ✓ [PATCH v2 3/3] backlight: mp3309c: Utilise temporary variable for struct device
> + Link: https://lore.kernel.org/r/20240201151537.367218-4-andriy.shevchenko@linux.intel.com
> + Signed-off-by: Lee Jones <lee@...nel.org>
> ---
> ✓ Signed: DKIM/intel.com (From: andriy.shevchenko@...ux.intel.com)
> ---
> Total patches: 3
> Prepared a fake commit range for 3-way merge (672ecc5199b5..d507b9f4c5b9)
> ---
> Link: https://lore.kernel.org/r/20240201151537.367218-1-andriy.shevchenko@linux.intel.com
> Base: not specified
>
> Running through checkpatch.pl
> total: 0 errors, 0 warnings, 103 lines checked
>
> "[PATCH v2 1/3] backlight: mp3309c: Make use of device properties" has no obvious style problems and is ready for submission.
> total: 0 errors, 0 warnings, 41 lines checked
>
> "[PATCH v2 2/3] backlight: mp3309c: use dev_err_probe() instead of" has no obvious style problems and is ready for submission.
> total: 0 errors, 0 warnings, 81 lines checked
>
> "[PATCH v2 3/3] backlight: mp3309c: Utilise temporary variable for" has no obvious style problems and is ready for submission.
>
> Check the results (hit return to continue or Ctrl+c to exit)
>
>
> Applying patch(es)
> Applying: backlight: mp3309c: Make use of device properties
> Applying: backlight: mp3309c: use dev_err_probe() instead of dev_err()
> Applying: backlight: mp3309c: Utilise temporary variable for struct device
> Using index info to reconstruct a base tree...
> M drivers/video/backlight/mp3309c.c
> Checking patch drivers/video/backlight/mp3309c.c...
> Applied patch drivers/video/backlight/mp3309c.c cleanly.
> Falling back to patching base and 3-way merge...
> error: Your local changes to the following files would be overwritten by merge:
> drivers/video/backlight/mp3309c.c
> Please commit your changes or stash them before you merge.
> Aborting
> error: Failed to merge in the changes.
> Patch failed at 0003 backlight: mp3309c: Utilise temporary variable for struct device
> hint: Use 'git am --show-current-patch=diff' to see the failed patch
> When you have resolved this problem, run "git am --continue".
> If you prefer to skip this patch, run "git am --skip" instead.
> To restore the original branch and stop patching, run "git am --abort".
Thank you!
It seems I have reduced context, so if you do `git am -C2 ...` it should apply.
Never mind, I'll send a new version which should work with -C3.
--
With Best Regards,
Andy Shevchenko
Powered by blists - more mailing lists