| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 8 Feb 2024 14:12:52 +0530
From: Vaishnav Achath <vaishnav.a@...com>
To: <vigneshr@...com>, <nm@...com>, <conor+dt@...nel.org>, <kristo@...nel.org>,
<krzysztof.kozlowski+dt@...aro.org>, <robh+dt@...nel.org>
CC: <j-luthra@...com>, <devicetree@...r.kernel.org>, <j-choudhary@...com>,
<kernel@...gutronix.de>, <linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <u-kumar1@...com>, <vaishnav.a@...com>,
<afd@...com>
Subject: [PATCH v2 7/9] arm64: dts: ti: k3-j721s2-main: Add CSI2RX capture nodes
J721S2 has two CSI2RX capture subsystem featuring Cadence CSI2RX,
DPHY and TI's pixel grabbing wrapper. Add nodes for the same and
keep them disabled by default. J721S2 uses a dedicated BCDMA instance
for CSI-RX traffic, so enable that as well.
J721S2 TRM (Section 12.7 Camera Subsystem):
https://www.ti.com/lit/zip/spruj28
Signed-off-by: Vaishnav Achath <vaishnav.a@...com>
---
V1->V2: Update commit message with TRM.
arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi | 123 ++++++++++++++++++++-
1 file changed, 122 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
index dcaa4da0d678..a401e84a2eb2 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
@@ -1122,7 +1122,6 @@ main_bcdma_csi: dma-controller@...a0000 {
ti,sci-dev-id = <225>;
ti,sci-rm-range-rchan = <0x21>;
ti,sci-rm-range-tchan = <0x22>;
- status = "disabled";
};
cpts@...d0000 {
@@ -1233,6 +1232,128 @@ usb0: usb@...0000 {
};
};
+ ti_csi2rx0: ticsi2rx@...0000 {
+ compatible = "ti,j721e-csi2rx-shim";
+ dmas = <&main_bcdma_csi 0 0x4940 0>;
+ dma-names = "rx0";
+ reg = <0x00 0x04500000 0x00 0x1000>;
+ power-domains = <&k3_pds 38 TI_SCI_PD_EXCLUSIVE>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ status = "disabled";
+
+ cdns_csi2rx0: csi-bridge@...4000 {
+ compatible = "ti,j721e-csi2rx", "cdns,csi2rx";
+ reg = <0x00 0x04504000 0x00 0x1000>;
+ clocks = <&k3_clks 38 3>, <&k3_clks 38 1>, <&k3_clks 38 3>,
+ <&k3_clks 38 3>, <&k3_clks 38 4>, <&k3_clks 38 4>;
+ clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
+ "pixel_if1_clk", "pixel_if2_clk", "pixel_if3_clk";
+ phys = <&dphy0>;
+ phy-names = "dphy";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ csi0_port0: port@0 {
+ reg = <0>;
+ status = "disabled";
+ };
+
+ csi0_port1: port@1 {
+ reg = <1>;
+ status = "disabled";
+ };
+
+ csi0_port2: port@2 {
+ reg = <2>;
+ status = "disabled";
+ };
+
+ csi0_port3: port@3 {
+ reg = <3>;
+ status = "disabled";
+ };
+
+ csi0_port4: port@4 {
+ reg = <4>;
+ status = "disabled";
+ };
+ };
+ };
+ };
+
+ ti_csi2rx1: ticsi2rx@...0000 {
+ compatible = "ti,j721e-csi2rx-shim";
+ dmas = <&main_bcdma_csi 0 0x4960 0>;
+ dma-names = "rx0";
+ reg = <0x00 0x04510000 0x00 0x1000>;
+ power-domains = <&k3_pds 39 TI_SCI_PD_EXCLUSIVE>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ status = "disabled";
+
+ cdns_csi2rx1: csi-bridge@...4000 {
+ compatible = "ti,j721e-csi2rx", "cdns,csi2rx";
+ reg = <0x00 0x04514000 0x00 0x1000>;
+ clocks = <&k3_clks 39 3>, <&k3_clks 39 1>, <&k3_clks 39 3>,
+ <&k3_clks 39 3>, <&k3_clks 39 4>, <&k3_clks 39 4>;
+ clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
+ "pixel_if1_clk", "pixel_if2_clk", "pixel_if3_clk";
+ phys = <&dphy1>;
+ phy-names = "dphy";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ csi1_port0: port@0 {
+ reg = <0>;
+ status = "disabled";
+ };
+
+ csi1_port1: port@1 {
+ reg = <1>;
+ status = "disabled";
+ };
+
+ csi1_port2: port@2 {
+ reg = <2>;
+ status = "disabled";
+ };
+
+ csi1_port3: port@3 {
+ reg = <3>;
+ status = "disabled";
+ };
+
+ csi1_port4: port@4 {
+ reg = <4>;
+ status = "disabled";
+ };
+ };
+ };
+ };
+
+ dphy0: phy@...0000 {
+ compatible = "cdns,dphy-rx";
+ reg = <0x00 0x04580000 0x00 0x1100>;
+ #phy-cells = <0>;
+ power-domains = <&k3_pds 152 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
+ };
+
+ dphy1: phy@...0000 {
+ compatible = "cdns,dphy-rx";
+ reg = <0x00 0x04590000 0x00 0x1100>;
+ #phy-cells = <0>;
+ power-domains = <&k3_pds 153 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
+ };
+
serdes_wiz0: wiz@...0000 {
compatible = "ti,j721s2-wiz-10g";
#address-cells = <1>;
--
2.34.1
Powered by blists - more mailing lists