lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240208110602.931573-1-b-kapoor@ti.com>
Date: Thu, 8 Feb 2024 16:35:59 +0530
From: Bhavya Kapoor <b-kapoor@...com>
To: <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>
CC: <nm@...com>, <vigneshr@...com>, <kristo@...nel.org>, <robh+dt@...nel.org>,
        <krzysztof.kozlowski+dt@...aro.org>, <conor+dt@...nel.org>,
        <linux-arm-kernel@...ts.infradead.org>, <b-kapoor@...com>
Subject: [PATCH 0/3] arm64: dts: ti: Modify pinmux for wakeup and mcu uart

WKUP_PADCONFIG registers for wakeup and mcu uart lies
under wkup_pmx2 for J7200. Thus, modify pinmux for both
of them.

Only Tx and Rx Signal lines for wakeup uart are brought out on
J721S2 Common Proc Board and J784S4 EVM, but CTS and RTS signal
lines are not brought out. Thus, remove pinmux for CTS and RTS signal
lines for wake up uart in J721S2 and J784S4.

Rebased to 20240208

Bhavya Kapoor (3):
  arm64: dts: ti: k3-j7200-common-proc-board: Modify Pinmux for wakeup
    and mcu uart
  arm64: dts: ti: k3-j721s2-common-proc-board: Remove Pinmux for CTS and
    RTS in Wakeup Uart
  arm64: dts: ti: k3-j784s4-evm: Remove Pinmux for CTS and RTS in Wakeup
    Uart

 .../boot/dts/ti/k3-j7200-common-proc-board.dts | 18 +++++++++---------
 .../dts/ti/k3-j721s2-common-proc-board.dts     |  2 --
 arch/arm64/boot/dts/ti/k3-j784s4-evm.dts       |  2 --
 3 files changed, 9 insertions(+), 13 deletions(-)

-- 
2.34.1


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ