linux-kernel - Re: [PATCH net-next v6 00/11] net: dsa: realtek: variants to drivers, interfaces to a common module

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CACRpkdbw+mJsGb=6iu6f+mGoi+vouu6TPztaD5SyuG+n8Staew@mail.gmail.com>
Date: Fri, 9 Feb 2024 14:17:48 +0100
From: Linus Walleij <linus.walleij@...aro.org>
To: Luiz Angelo Daros de Luca <luizluca@...il.com>
Cc: Alvin Šipraga <alsi@...g-olufsen.dk>, 
	Andrew Lunn <andrew@...n.ch>, Florian Fainelli <f.fainelli@...il.com>, 
	Vladimir Oltean <olteanv@...il.com>, "David S. Miller" <davem@...emloft.net>, 
	Eric Dumazet <edumazet@...gle.com>, Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>, 
	Russell King <linux@...linux.org.uk>, netdev@...r.kernel.org, 
	linux-kernel@...r.kernel.org, 
	Florian Fainelli <florian.fainelli@...adcom.com>
Subject: Re: [PATCH net-next v6 00/11] net: dsa: realtek: variants to drivers,
 interfaces to a common module

On Fri, Feb 9, 2024 at 6:04 AM Luiz Angelo Daros de Luca
<luizluca@...il.com> wrote:

> The current driver consists of two interface modules (SMI and MDIO) and
> two family/variant modules (RTL8365MB and RTL8366RB). The SMI and MDIO
> modules serve as the platform and MDIO drivers, respectively, calling
> functions from the variant modules. In this setup, one interface module
> can be loaded independently of the other, but both variants must be
> loaded (if not disabled at build time) for any type of interface. This
> approach doesn't scale well, especially with the addition of more switch
> variants (e.g., RTL8366B), leading to loaded but unused modules.
> Additionally, this also seems upside down, as the specific driver code
> normally depends on the more generic functions and not the other way
> around.
>
> Each variant module was converted into real drivers, serving as both a
> platform driver (for switches connected using the SMI interface) and an
> MDIO driver (for MDIO-connected switches). The relationship between the
> variant and interface modules is reversed, with the variant module now
> calling both interface functions (if not disabled at build time). While
> in most devices only one interface is likely used, the interface code is
> significantly smaller than a variant module, consuming fewer resources
> than the previous code. With variant modules now functioning as real
> drivers, compatible strings are published only in a single variant
> module, preventing conflicts.
>
> The patch series introduces a new common module for functions shared by
> both variants. This module also absorbs the two previous interface
> modules, as they would always be loaded anyway.
>
> The series relocates the user MII driver from realtek-smi to rtl83xx. It
> is now used by MDIO-connected switches instead of the generic DSA
> driver. There's a change in how this driver locates the MDIO node. It
> now only searches for a child node named "mdio".
>
> The dsa_switch in realtek_priv->ds is now embedded in the struct. It is
> always in use and avoids dynamic memory allocation.
>
> Testing has been performed with an RTL8367S (rtl8365mb) using MDIO
> interface and an RTL8366RB (rtl8366) with SMI interface.

Tested on my RTL8366RB on a D-Link DIR-685 as well, works like a
charm:
Tested-by: Linus Walleij <linus.walleij@...aro.org>

Yours,
Linus Walleij