lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240209-cdns-qspi-cs-v1-0-a4f9dfed9ab4@bootlin.com>
Date: Fri, 09 Feb 2024 14:45:29 +0100
From: Théo Lebrun <theo.lebrun@...tlin.com>
To: Mark Brown <broonie@...nel.org>
Cc: linux-spi@...r.kernel.org, linux-kernel@...r.kernel.org, 
 Dhruva Gole <d-gole@...com>, Gregory CLEMENT <gregory.clement@...tlin.com>, 
 Vladimir Kondratiev <vladimir.kondratiev@...ileye.com>, 
 Thomas Petazzoni <thomas.petazzoni@...tlin.com>, 
 Tawfik Bayouk <tawfik.bayouk@...ileye.com>, 
 Théo Lebrun <theo.lebrun@...tlin.com>
Subject: [PATCH 0/4] spi: cadence-quadspi: correct chip-select logic

Hi,

Here are three independent patches that relate to the handling of
chip-select and the number of those in the spi-cadence-quadspi.c
driver.

 - First one is about checking each flash node reg (ie CS) against the
   ->num_chipselect value instead of the hardcoded max constant. That
   means it checks against the num-cs DT prop if it existed. Previously
   num-cs==1 with 2 flash nodes would have lead to no error,
   a ->num_chipselect==1 and 2 flashes.

 - Second, we lower the max CS constant from 16 to 4. The hardware only
   supports 4 anyway, and that makes for less memory used. This got
   discovered on v6.8-rc2 when the SPI subsystem imposed a max CS of 4.
   The change got reverted later.

 - Lastly, we adjust the ->num_chipselect value reported to the actual
   number of chip-selects. Previously, it reported either the num-cs DT
   prop or the max value (if no num-cs was provided).

There is also a small fix to move to modern names and avoid using the
legacy compatibility layer (slave, etc).

Thanks,
Théo

Signed-off-by: Théo Lebrun <theo.lebrun@...tlin.com>
---
Théo Lebrun (4):
      spi: cadence-qspi: assert each subnode flash CS is valid
      spi: cadence-qspi: set maximum chip-select to 4
      spi: cadence-qspi: report correct number of chip-select
      spi: cadence-qspi: switch from legacy names to modern ones

 drivers/spi/spi-cadence-quadspi.c | 16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)
---
base-commit: 19b50f80b3a4865bd477aa5c026dd234d39a50d2
change-id: 20240209-cdns-qspi-cs-621bfe7f327f

Best regards,
-- 
Théo Lebrun <theo.lebrun@...tlin.com>


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ