Message-ID: <7fhl7uvhl26whumcl3f5hxflczws67lg3yq4gb5fyrig2ziux6@chft6orl6xne>
Date: Fri, 9 Feb 2024 10:06:59 -0800
From: Elliot Berman <quic_eberman@...cinc.com>
To: Dibakar Singh <quic_dibasing@...cinc.com>
CC: <andersson@...nel.org>, <konrad.dybcio@...aro.org>,
        <krzysztof.kozlowski@...aro.org>, <luzmaximilian@...il.com>,
        <bartosz.golaszewski@...aro.org>, <quic_gurus@...cinc.com>,
        <linux-arm-msm@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <quic_guptap@...cinc.com>, <quic_pkondeti@...cinc.com>,
        <quic_pheragu@...cinc.com>
Subject: Re: [PATCH] firmware: qcom_scm: Introduce batching of hyp assign
 calls

On Fri, Feb 09, 2024 at 04:55:36PM +0530, Dibakar Singh wrote:
> Expose an API qcom_scm_assign_table to allow client drivers to batch
> multiple memory regions in a single hyp assign call.
> 
> In the existing situation, if our goal is to process an sg_table and
> transfer its ownership from the current VM to a different VM, we have a
> couple of strategies. The first strategy involves processing the entire
> sg_table at once and then transferring the ownership. However, this
> method may have an adverse impact on the system because during an SMC
> call, the NS interrupts are disabled, and this delay could be
> significant when dealing with large sg_tables. To address this issue, we
> can adopt a second strategy, which involves processing each sg_list in
> the sg_table individually and reassigning memory ownership. Although
> this method is slower and potentially impacts performance, it will not
> keep the NS interrupts disabled for an extended period.
> 
> A more efficient strategy is to process the sg_table in batches. This
> approach addresses both scenarios by involving memory processing in
> batches, thus avoiding prolonged NS interrupt disablement for longer
> duration when dealing with large sg_tables. Moreover, since we process
> in batches, this method is faster compared to processing each item
> individually. The observations on testing both the approaches for
> performance is as follows:
> 
> Allocation Size/            256MB            512MB            1024MB
> Algorithm Used           ===========      ===========      ============
> 
> Processing each sg_list   73708(us)        149289(us)       266964(us)
> in sg_table one by one
> 
> Processing sg_table in    46925(us)         92691(us)       176893(us)
> batches
> 
> This implementation serves as a wrapper around the helper function
> __qcom_scm_assign_mem, which takes an sg_list and processes it in
> batches. We’ve set the limit to a minimum of 32 sg_list in a batch or a
> total batch size of 512 pages. The selection of these numbers is
> heuristic, based on the test runs conducted. Opting for a smaller number
> would compromise performance, while a larger number would result in
> non-secure interrupts being disabled for an extended duration.
>
> Co-developed-by: Prakruthi Deepak Heragu <quic_pheragu@...cinc.com>
> Signed-off-by: Prakruthi Deepak Heragu <quic_pheragu@...cinc.com>
> Signed-off-by: Dibakar Singh <quic_dibasing@...cinc.com>
> ---
>  drivers/firmware/qcom/qcom_scm.c       | 211 +++++++++++++++++++++++++
>  include/linux/firmware/qcom/qcom_scm.h |   7 +
>  2 files changed, 218 insertions(+)
> 
> diff --git a/drivers/firmware/qcom/qcom_scm.c b/drivers/firmware/qcom/qcom_scm.c
> index 520de9b5633a..038b96503d65 100644
> --- a/drivers/firmware/qcom/qcom_scm.c
> +++ b/drivers/firmware/qcom/qcom_scm.c
> @@ -21,6 +21,8 @@
>  #include <linux/platform_device.h>
>  #include <linux/reset-controller.h>
>  #include <linux/types.h>
> +#include <linux/scatterlist.h>
> +#include <linux/slab.h>
>  
>  #include "qcom_scm.h"
>  
> @@ -1048,6 +1050,215 @@ int qcom_scm_assign_mem(phys_addr_t mem_addr, size_t mem_sz,
>  }
>  EXPORT_SYMBOL_GPL(qcom_scm_assign_mem);
>  
> +/**
> + * qcom_scm_assign_mem_batch() - Make a secure call to reassign memory
> + *				   ownership of several memory regions
> + * @mem_regions:    A buffer describing the set of memory regions that need to
> + *		    be reassigned
> + * @nr_mem_regions: The number of memory regions that need to be reassigned
> + * @srcvms:	    A buffer populated with he vmid(s) for the current set of
> + *		    owners
> + * @src_sz:	    The size of the srcvms buffer (in bytes)
> + * @destvms:	    A buffer populated with the new owners and corresponding
> + *		    permission flags.
> + * @dest_sz:	    The size of the destvms buffer (in bytes)
> + *
> + * Return negative errno on failure, 0 on success.
> + */
> +static int qcom_scm_assign_mem_batch(struct qcom_scm_mem_map_info *mem_regions,
> +				     size_t nr_mem_regions, u32 *srcvms,
> +				     size_t src_sz,
> +				     struct qcom_scm_current_perm_info *destvms,
> +				     size_t dest_sz)
> +{
> +	dma_addr_t mem_dma_addr;
> +	size_t mem_regions_sz;
> +	int ret = 0, i;
> +
> +	for (i = 0; i < nr_mem_regions; i++) {
> +		mem_regions[i].mem_addr = cpu_to_le64(mem_regions[i].mem_addr);
> +		mem_regions[i].mem_size = cpu_to_le64(mem_regions[i].mem_size);
> +	}
> +
> +	mem_regions_sz = nr_mem_regions * sizeof(*mem_regions);
> +	mem_dma_addr = dma_map_single(__scm->dev, mem_regions, mem_regions_sz,
> +				      DMA_TO_DEVICE);
> +	if (dma_mapping_error(__scm->dev, mem_dma_addr)) {
> +		dev_err(__scm->dev, "mem_dma_addr mapping failed\n");
> +		return -ENOMEM;
> +	}
> +
> +	ret = __qcom_scm_assign_mem(__scm->dev, virt_to_phys(mem_regions),
> +				    mem_regions_sz, virt_to_phys(srcvms), src_sz,
> +				    virt_to_phys(destvms), dest_sz);
> +
> +	dma_unmap_single(__scm->dev, mem_dma_addr, mem_regions_sz, DMA_TO_DEVICE);
> +	return ret;
> +}
> +
> +/**
> + * qcom_scm_prepare_mem_batch() - Prepare batches of memory regions
> + * @sg_table:       A scatter list whose memory needs to be reassigned
> + * @srcvms:	    A buffer populated with he vmid(s) for the current set of
> + *		    owners
> + * @nr_src:	    The number of the src_vms buffer
> + * @destvms:	    A buffer populated with he vmid(s) for the new owners
> + * @destvms_perms:  A buffer populated with the permission flags of new owners
> + * @nr_dest:	    The number of the destvms
> + * @last_sgl:	    Denotes to the last scatter list element. Used in case of rollback
> + * @roll_back:	    Identifies whether we are executing rollback in case of failure
> + *
> + * Return negative errno on failure, 0 on success.
> + */
> +static int qcom_scm_prepare_mem_batch(struct sg_table *table,
> +				      u32 *srcvms, int nr_src,
> +				      int *destvms, int *destvms_perms,
> +				      int nr_dest,
> +				      struct scatterlist *last_sgl, bool roll_back)
> +{
> +	struct qcom_scm_current_perm_info *destvms_cp;
> +	struct qcom_scm_mem_map_info *mem_regions_buf;
> +	struct scatterlist *curr_sgl = table->sgl;
> +	dma_addr_t source_dma_addr, dest_dma_addr;
> +	size_t batch_iterator;
> +	size_t batch_start = 0;
> +	size_t destvms_cp_sz;
> +	size_t srcvms_cp_sz;
> +	size_t batch_size;
> +	u32 *srcvms_cp;
> +	int ret = 0;
> +	int i;
> +
> +	if (!table || !table->sgl || !srcvms || !nr_src ||
> +	    !destvms || !destvms_perms || !nr_dest || !table->nents)
> +		return -EINVAL;
> +
> +	srcvms_cp_sz = sizeof(*srcvms_cp) * nr_src;
> +	srcvms_cp = kmemdup(srcvms, srcvms_cp_sz, GFP_KERNEL);
> +	if (!srcvms_cp)
> +		return -ENOMEM;
> +
> +	for (i = 0; i < nr_src; i++)
> +		srcvms_cp[i] = cpu_to_le32(srcvms_cp[i]);
> +
> +	source_dma_addr = dma_map_single(__scm->dev, srcvms_cp,
> +					 srcvms_cp_sz, DMA_TO_DEVICE);

Please use the new tzmem allocator:

https://lore.kernel.org/all/20240205182810.58382-1-brgl@bgdev.pl/

> +
> +	if (dma_mapping_error(__scm->dev, source_dma_addr)) {
> +		ret = -ENOMEM;
> +		goto out_free_source;
> +	}
> +
> +	destvms_cp_sz = sizeof(*destvms_cp) * nr_dest;
> +	destvms_cp = kzalloc(destvms_cp_sz, GFP_KERNEL);
> +
> +	if (!destvms_cp) {
> +		ret = -ENOMEM;
> +		goto out_unmap_source;
> +	}
> +
> +	for (i = 0; i < nr_dest; i++) {
> +		destvms_cp[i].vmid = cpu_to_le32(destvms[i]);
> +		destvms_cp[i].perm = cpu_to_le32(destvms_perms[i]);
> +		destvms_cp[i].ctx = 0;
> +		destvms_cp[i].ctx_size = 0;
> +	}
> +
> +	dest_dma_addr = dma_map_single(__scm->dev, destvms_cp,
> +				       destvms_cp_sz, DMA_TO_DEVICE);
> +	if (dma_mapping_error(__scm->dev, dest_dma_addr)) {
> +		ret = -ENOMEM;
> +		goto out_free_dest;
> +	}
> +
> +	mem_regions_buf = kcalloc(QCOM_SCM_MAX_BATCH_SECTION, sizeof(*mem_regions_buf),
> +				  GFP_KERNEL);
> +	if (!mem_regions_buf)
> +		return -ENOMEM;
> +
> +	while (batch_start < table->nents) {
> +		batch_size = 0;
> +		batch_iterator = 0;
> +
> +		do {
> +			mem_regions_buf[batch_iterator].mem_addr = page_to_phys(sg_page(curr_sgl));
> +			mem_regions_buf[batch_iterator].mem_size = curr_sgl->length;
> +			batch_size += curr_sgl->length;
> +			batch_iterator++;
> +			if (roll_back && curr_sgl == last_sgl)
> +				break;
> +			curr_sgl = sg_next(curr_sgl);
> +		} while (curr_sgl && batch_iterator < QCOM_SCM_MAX_BATCH_SECTION &&
> +				curr_sgl->length + batch_size < QCOM_SCM_MAX_BATCH_SIZE);
> +
> +		batch_start += batch_iterator;
> +
> +		ret = qcom_scm_assign_mem_batch(mem_regions_buf, batch_iterator,
> +						srcvms_cp, srcvms_cp_sz, destvms_cp, destvms_cp_sz);
> +
> +		if (ret) {
> +			dev_info(__scm->dev, "Failed to assign memory protection, ret = %d\n", ret);
> +			last_sgl = curr_sgl;
> +			ret = -EADDRNOTAVAIL;

Probably should not be changing the ret value.

What happens to the memory that has been assigned so far? How do we
reclaim that?

> +			break;
> +		}
> +		if (roll_back && curr_sgl == last_sgl)
> +			break;
> +	}
> +	kfree(mem_regions_buf);
> +
> +	dma_unmap_single(__scm->dev, dest_dma_addr,
> +			 destvms_cp_sz, DMA_TO_DEVICE);
> +
> +out_free_dest:
> +	kfree(destvms_cp);
> +out_unmap_source:
> +	dma_unmap_single(__scm->dev, source_dma_addr,
> +			 srcvms_cp_sz, DMA_TO_DEVICE);
> +out_free_source:
> +	kfree(srcvms_cp);
> +	return ret;
> +}
> +
> +/**
> + * qcom_scm_assign_table() - Make a call to prepare batches of memory regions
> + *			     and reassign memory ownership of several memory regions at once
> + * @sg_table:       A scatter list whose memory needs to be reassigned
> + * @srcvms:	    A buffer populated with he vmid(s) for the current set of
> + *		    owners
> + * @nr_src:	    The number of the src_vms buffer
> + * @destvms:	    A buffer populated with he vmid(s) for the new owners
> + * @destvms_perms:  A buffer populated with the permission flags of new owners
> + * @nr_dest:	    The number of the destvms
> + *
> + * Return negative errno on failure, 0 on success.
> + */
> +int qcom_scm_assign_table(struct sg_table *table,
> +			  u32 *srcvms, int nr_src,
> +			  int *destvms, int *destvms_perms,
> +			  int nr_dest)
> +{
> +	struct scatterlist *last_sgl = NULL;
> +	int rb_ret = 0;
> +	u32 new_dests;
> +	int new_perms;
> +	int ret = 0;
> +
> +	ret = qcom_scm_prepare_mem_batch(table, srcvms, nr_src,
> +					 destvms, destvms_perms, nr_dest, last_sgl, false);
> +
> +	if (!ret)
> +		goto out;
> +	new_dests = QCOM_SCM_VMID_HLOS;

We have the original srcvms. Will it always be HLOS? If so, then do we
need to pass srcvms at all?

> +	new_perms = QCOM_SCM_PERM_EXEC | QCOM_SCM_PERM_WRITE | QCOM_SCM_PERM_READ;
> +	rb_ret = qcom_scm_prepare_mem_batch(table, destvms, nr_dest, &new_dests,
> +					    &new_perms, nr_src, last_sgl, true);
> +	WARN_ON_ONCE(rb_ret);
> +out:
> +	return ret;
> +}
> +EXPORT_SYMBOL_GPL(qcom_scm_assign_table);

Who uses this function?

> +
>  /**
>   * qcom_scm_ocmem_lock_available() - is OCMEM lock/unlock interface available
>   */
> diff --git a/include/linux/firmware/qcom/qcom_scm.h b/include/linux/firmware/qcom/qcom_scm.h
> index ccaf28846054..abd675c7ef49 100644
> --- a/include/linux/firmware/qcom/qcom_scm.h
> +++ b/include/linux/firmware/qcom/qcom_scm.h
> @@ -8,6 +8,7 @@
>  #include <linux/err.h>
>  #include <linux/types.h>
>  #include <linux/cpumask.h>
> +#include <linux/scatterlist.h>
>  
>  #include <dt-bindings/firmware/qcom,scm.h>
>  
> @@ -15,6 +16,8 @@
>  #define QCOM_SCM_CPU_PWR_DOWN_L2_ON	0x0
>  #define QCOM_SCM_CPU_PWR_DOWN_L2_OFF	0x1
>  #define QCOM_SCM_HDCP_MAX_REQ_CNT	5
> +#define QCOM_SCM_MAX_BATCH_SECTION	32
> +#define QCOM_SCM_MAX_BATCH_SIZE		SZ_2M
>  
>  struct qcom_scm_hdcp_req {
>  	u32 addr;
> @@ -93,6 +96,10 @@ int qcom_scm_mem_protect_video_var(u32 cp_start, u32 cp_size,
>  int qcom_scm_assign_mem(phys_addr_t mem_addr, size_t mem_sz, u64 *src,
>  			const struct qcom_scm_vmperm *newvm,
>  			unsigned int dest_cnt);
> +int qcom_scm_assign_table(struct sg_table *table,
> +			  u32 *srcvms, int nr_src,
> +			  int *destvms, int *destvms_perms,
> +			  int nr_dest);
>  
>  bool qcom_scm_ocmem_lock_available(void);
>  int qcom_scm_ocmem_lock(enum qcom_scm_ocmem_client id, u32 offset, u32 size,
> -- 
> 2.34.1
> 

Powered by blists - more mailing lists